1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your PUTORSEN Monitor Wall Mount. This heavy-duty wall-mounted monitor arm is designed to support ultrawide screens up to 49 inches and weighing up to 44 lbs. It features a gas spring for smooth adjustments, along with tilt, swivel, and rotation capabilities to optimize your viewing experience and reclaim desk space.
ഇൻസ്റ്റാൾ ചെയ്യുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുകയും ഭാവിയിലെ റഫറൻസിനായി സൂക്ഷിക്കുകയും ചെയ്യുക.
Image 1.1: The PUTORSEN Monitor Wall Mount installed with a 49-inch ultrawide monitor, showcasing its strength and stability.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഭാരം ശേഷി: Do not exceed the maximum weight capacity of 44 lbs (20 kg). Exceeding this limit may result in serious injury or product damage.
- സ്ക്രീൻ വലിപ്പം: Compatible with monitors from 17 to 49 inches.
- VESA അനുയോജ്യത: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm.
- ചുമർ തരം: This mount is designed for installation on wood stud walls, brick walls, or concrete walls. DO NOT mount solely on drywall. Drywall cannot support the weight of the mount and monitor.
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: ഇൻസ്റ്റാളേഷൻ പ്രക്രിയയെക്കുറിച്ചോ മതിൽ തരത്തെക്കുറിച്ചോ നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്രൊഫഷണലിനെ സമീപിക്കുക.
- Gas Spring Warning: The gas spring is under pressure. Exercise caution during assembly and adjustment. Do not attempt to disassemble the gas spring cylinder.
- കുട്ടികൾ: ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
3. പാക്കേജ് ഉള്ളടക്കം
Please verify that all components are present and undamaged before proceeding with installation. All necessary hardware for installation is included.
Note: An ultrawide adapter for monitors with circular/non-standard VESA patterns is not included. Check your monitor's original packaging for a conversion adapter if needed.
4 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | പുട്ടർമാർ |
| മോഡൽ | B0CZDS7RYY |
| മെറ്റീരിയൽ | Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Aluminum |
| നിറം | കറുപ്പ് |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| ചലന തരം | Swivel, Tilt, Rotation, Height Adjustment |
| മോണിറ്റർ വലുപ്പ അനുയോജ്യത | 17" - 49" (flat or curved) |
| ഭാരം ശേഷി | 44 പൗണ്ട് വരെ (20 കി.ഗ്രാം) |
| VESA അനുയോജ്യത | 75x75mm, 100x100mm |
| ടിൽറ്റ് റേഞ്ച് | +50° മുതൽ -20° വരെ |
| സ്വിവൽ റേഞ്ച് | ±90° |
| ഭ്രമണ ശ്രേണി | 360° (±180°) |
| ഉയരം ക്രമീകരിക്കൽ | Up to 11.34 inches (via gas spring) |
| Wall Distance (Min/Max) | 4.15" / 22.58" |
| ഇനത്തിൻ്റെ ഭാരം | 8.16 പൗണ്ട് |
Image 4.1: Detailed product dimensions and movement ranges. Verify your monitor's VESA specifications before purchase.
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during certain stages of installation, especially when mounting the monitor.
5.1 Choose a Mounting Location
- Identify a suitable wall location that can support the combined weight of the mount and your monitor.
- Ensure the wall is a wood stud, brick, or concrete wall. Avoid drywall-only installations.
- Use a stud finder to locate the center of a wood stud if mounting on a wood stud wall.
5.2 Attach Wall Plate
- Position the wall plate at the desired height and mark the drilling locations.
- Drill pilot holes according to the provided template and hardware instructions.
- Secure the wall plate to the wall using the appropriate screws and anchors for your wall type. Ensure it is firmly attached.
5.3 Assemble Arm Sections
- Connect the arm sections as shown in the assembly diagram. The modular design allows for straightforward assembly.
- എല്ലാ കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കുക.
Image 5.1: Streamlined installation process, illustrating modular assembly and compatible wall types. Remember: Do not mount solely on drywall.
5.4 മോണിറ്ററിലേക്ക് VESA പ്ലേറ്റ് അറ്റാച്ചുചെയ്യുക
- Carefully place your monitor face down on a soft, clean surface.
- Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Secure the VESA plate to the monitor using the provided screws. Do not overtighten.
Image 5.2: The heavy-duty tilt mechanism and VESA interface. Ensure proper alignment and secure fastening of the VESA plate to your monitor.
5.5 Mount Monitor to Arm
- With assistance, carefully lift the monitor with the attached VESA plate.
- Slide the VESA plate onto the monitor arm's mounting head until it clicks into place or is securely fastened.
- Tighten any safety screws or mechanisms to prevent accidental dislodgement.
5.6 കേബിൾ മാനേജ്മെന്റ്
- Route monitor cables through the integrated cable management channels on the arm.
- This helps maintain a neat and clutter-free workspace.
Image 5.3: Reinforced base with integrated cable management for a clean setup.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The PUTORSEN Monitor Wall Mount offers full motion capabilities for optimal viewആശ്വാസം.
6.1 Height Adjustment (Gas Spring)
- To adjust the monitor height, gently push or pull the monitor to the desired position. The gas spring system allows for smooth vertical movement up to 11.34 inches.
- If the arm does not hold its position or is difficult to move, refer to the "Troubleshooting" section for gas spring tension adjustment.
6.2 ടിൽറ്റ് അഡ്ജസ്റ്റ്മെൻ്റ്
- The monitor can be tilted +50° upwards and -20° downwards.
- Loosen the tilt adjustment screw slightly, adjust the monitor to the desired angle, then re-tighten the screw to secure it.
6.3 സ്വിവൽ ക്രമീകരണം
- The monitor arm allows for a ±90° swivel range.
- Gently rotate the monitor horizontally to achieve your preferred viewing ആംഗിൾ.
6.4 ഭ്രമണ ക്രമീകരണം
- The VESA plate allows for a full 360° rotation (±180°).
- Rotate the monitor to switch between landscape and portrait orientations as needed.
Image 6.1: The monitor arm's extendable design allows for flexible positioning and space optimization.
7. പരിപാലനം
- വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth to clean the surface of the mount. Avoid harsh chemicals or abrasive cleaners.
- ആനുകാലിക പരിശോധനകൾ: എല്ലാ സ്ക്രൂകളും കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക. ആവശ്യമെങ്കിൽ വീണ്ടും മുറുക്കുക.
- ഗ്യാസ് സ്പ്രിംഗ്: The gas spring is designed for long-term performance. No specific maintenance is required for the gas spring itself, but ensure its tension is correctly adjusted for your monitor's weight.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | പരിഹാരം |
|---|---|
| Arm will not raise: Monitor feels too heavy, arm sags. | Tighten the gas spring adjustment screw in the "+" direction (counter-clockwise) until the arm can hold the monitor's weight. |
| Arm will not lower: Monitor feels too light, arm stays up. | Loosen the gas spring adjustment screw in the "-" direction (clockwise) until the arm can be lowered smoothly. |
| Tilt is too loose: Monitor tilts freely or sags. | Tighten the tilt adjustment screw clockwise to prevent the monitor from lowering. |
| Tilt is too stiff: Difficult to adjust monitor tilt. | Loosen the tilt adjustment screw counter-clockwise for smoother movement. |
| മൗണ്ട് അസ്ഥിരമായി തോന്നുന്നു. | Ensure all mounting screws are securely tightened. Verify the wall type is appropriate and the mount is anchored correctly. |
| കേബിളുകൾ കുഴപ്പത്തിലാണ്. | Utilize the integrated cable management channels on the arm to route and conceal cables. |
Image 8.1: Joint adjustment guide for gas spring tension and tilt mechanism.
9. വാറണ്ടിയും പിന്തുണയും
PUTORSEN products are manufactured with quality and durability in mind. While specific warranty details may vary by region and retailer, we stand by the quality of our products.
ഉപഭോക്തൃ പിന്തുണ: Our dedicated customer support team is available to assist with any installation guidance, compatibility questions, or usage concerns you may have. We are committed to providing clear and practical support to ensure a smooth experience with your product.
For assistance, please refer to the contact information provided with your purchase or visit the official PUTORSEN webസൈറ്റ്.