VSYSTO Q3 Motorcycle Dash Camera Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The VSYSTO Q3 is a WiFi-enabled motorcycle dash camera system designed for comprehensive recording of your rides. It features front and rear 1080P cameras with SONYIMX307 sensors, GPS tracking, parking monitoring, and a wired controller for easy operation. The system is fully waterproof, ensuring reliable performance in various weather conditions. This manual provides detailed instructions for installation, operation, and maintenance.

2. ബോക്സിൽ എന്താണുള്ളത്?

പെട്ടി ശ്രദ്ധാപൂർവ്വം അൺപാക്ക് ചെയ്ത് എല്ലാ ഇനങ്ങളും ഉണ്ടെന്നും നല്ല നിലയിലാണെന്നും ഉറപ്പാക്കുക. ഏതെങ്കിലും ഇനങ്ങൾ നഷ്ടപ്പെട്ടിട്ടുണ്ടെങ്കിലോ കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിലോ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

• Host with bracket
• 2 Cameras (Front and Rear)
• ജിപിഎസ് മൊഡ്യൂൾ
• പവർ കേബിൾ
• വയർഡ് കൺട്രോളർ
• USB കേബിൾ
• Camera Extension Cables (2 meters / 6.5ft x2)
• GPS Extension Cable (2 meters / 6.5ft)
• Cable Fixing Accessories

Image: All components of the VSYSTO Q3 Motorcycle Dash Camera system.

3. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Proper installation is crucial for the optimal performance and longevity of your VSYSTO Q3 dash camera. Follow these steps carefully.

3.1 Initial Connection and Testing

1. Connect the wired controller, cameras, and GPS connector to the main host unit.
2. Use the provided USB test cable to connect the system to a 5V 2A charger or power bank for testing.
3. Verify that the system powers on and the wired controller functions correctly. If the wired controller vibrates abnormally, check the memory card and camera connections.

3.2 Host Bracket Installation

1. Attach the bracket pad to the host bracket.
2. Align the bracket with the bracket hole on the host unit.
3. Insert the screw through the bracket and into the host, then tighten securely with a wrench.
4. Use adhesive tape to secure the host unit inside the motorcycle, typically under the seat or in a storage compartment.

Image: Step-by-step guide for installing the host unit's bracket.

3.3 Camera Bracket Installation

1. Install the shock-absorbing rubber ring onto the camera.
2. Install the circular bracket onto the camera.
3. Place the gasket into the base of the camera bracket.
4. Insert the metal sheet into the screw, put them through the bracket, cover the nut, and tighten with a wrench.
5. After installing the camera bracket, attach it to the appropriate position on the motorcycle using tape or screws.

Image: Step-by-step guide for installing the camera brackets.

3.4 പവർ കേബിൾ കണക്ഷൻ

The power cable has three wires: red, black, and yellow.

• ചുവന്ന വയർ: Connect to the positive pole of the motorcycle power supply.
• കറുത്ത വയർ: Connect to the negative pole.
• മഞ്ഞ വയർ: Connect to the ACC power of the motorcycle.

To find the ACC line, you can use the power cable module's blue light indicator. Connect the black and red wires to the battery. Then, connect the yellow wire to different potential ACC lines on the motorcycle. When the blue light on the power cable module turns on and off with the motorcycle's ignition key, you have found the correct ACC line.

Image: Diagram showing the power cable connections to the motorcycle battery and ACC line.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Wired Controller Functions

• Red Button (Short Press): Records an emergency video. The motor will vibrate once, and the LED indicator will flash quickly.
• Red Button (Long Press): Resets the WiFi password.
• Blue Button (Long Press): Pauses vibration from the wired controller. This is useful if the controller vibrates due to a fault, allowing you to check the system.
• LED സൂചകം: Slow flashes indicate normal recording. Fast flashes indicate emergency video recording.

ചിത്രം: കഴിഞ്ഞുview of the wired controller and its various functions.

4.2 WiFi Connection and APP Usage

The VSYSTO Q3 features a WiFi signal enhancer for improved video download speeds. Use the dedicated mobile APP to manage your recordings.

1. Download the "WiFi Camera" APP from Google Play or the App Store.
2. റെക്കോർഡർ ഓണാക്കുക.
3. On your phone, go to WiFi settings and connect to the WiFi network starting with "MOTODV" or "VSYSTO". Enter the default password (usually 12345678 or 88888888). Note: WiFi is an internal network; your phone may show "no network connection" which is normal. Some phones may require turning off mobile data before connecting to the dash cam's WiFi.
4. Open the "WiFi Camera" APP and click "Enter recorder" to view the real-time camera feed.
5. In the APP, you can switch between front and rear camera views, manually record, or take pictures.
6. Click "Online" to view files stored on the memory card. You can delete or download video files from here. After downloading, videos can be played from the "Local" page or edited and shared within 30 seconds.
7. The "Settings" page allows you to configure loop video time (1/2/3/5 minutes), sound recording, G-sensor sensitivity (recommended Level 0 or 1), microphone sensitivity, reset camera, and other functions.

പ്രധാനപ്പെട്ടത്: When the phone is connected to WiFi, the recorder will stop recording, and the wired controller cannot be operated. If you need to view and record videos in real-time, please click the red "Record" button on the preview page. After you disconnect WiFi and exit the APP, the recorder automatically starts recording after 30 seconds.

Image: Visual guide for connecting the VSYSTO Q3 to your phone via WiFi.

5 പ്രധാന സവിശേഷതകൾ

5.1 HD 1080P Front and Rear Cameras

Equipped with SONYIMX307 COMS sensors and 150° wide-angle lenses, both front and rear cameras record in 1080P resolution. Advanced WDR (Wide Dynamic Range) technology automatically adjusts brightness for clear, color-accurate video even in low-light conditions.

Image: Illustrates the 1080P dual cameras and their wide-angle coverage.

5.2 ജിപിഎസ് ട്രാക്കിംഗ്

The integrated GPS module records driving speed, longitude, and latitude. Driving tracks can be viewed on the mobile APP or a computer.

Image: Depicts the GPS tracking functionality, showing a motorcycle route on a map interface.

5.3 പാർക്കിംഗ് നിരീക്ഷണം

When the motorcycle is parked and the ignition is off, the recorder detects vibrations. If a shake is detected, it automatically turns on and records for 30 seconds before turning off. This feature can be enabled or disabled via the APP settings. Note: This function requires hard-wired installation and a battery voltage 11.8V യിൽ കുറവല്ല.

Image: Illustration of the parking monitoring feature, showing automatic recording upon vibration detection.

5.4 Full Body Waterproof Design

Both the host unit and cameras are designed to be fully waterproof, ensuring stable operation in rainy or dusty conditions.

Image: Demonstrates the waterproof capabilities of the VSYSTO Q3 dash camera system.

5.5 Seamless Loop Recording and G-Sensor

The system supports seamless loop recording, allowing you to choose video lengths of 1, 2, 3, or 5 minutes. When the SD card is full, new videos will automatically overwrite the oldest recordings. The built-in G-sensor detects collisions and automatically locks the current video to prevent it from being overwritten, providing crucial accident proof.

Image: Shows the emergency recording function, where the G-sensor locks video footagഒരു ആഘാത സമയത്ത്.

6. പരിപാലനം

• SD കാർഡ് പരിപാലനം: Regularly format the SD card (at least once a month) to ensure optimal performance and prevent data corruption. Use a high-quality, high-speed SD card (up to 256GB).
• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the camera lenses and host unit. Avoid abrasive cleaners or solvents.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Check the VSYSTO official website or APP for any available firmware updates to ensure your device has the latest features and bug fixes.
• കേബിൾ പരിശോധന: Periodically inspect all cables for any signs of wear, damage, or loose connections.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your VSYSTO Q3 dash camera, refer to the following common troubleshooting steps:

• ഉപകരണം ഓണാക്കുന്നില്ല: Check all power connections, including the battery terminals and ACC line. Ensure the motorcycle's ignition is on if connected to ACC.
• Wired controller vibrates abnormally: This indicates a potential fault. Check if the memory card is properly inserted and if both cameras are connected correctly. Long press the blue button on the wired controller to pause the vibration while you investigate.
• Slow WiFi download speeds: Ensure your video loop recording setting is set to a shorter duration (e.g., 1 to 3 minutes) for faster downloads.
• No video recording: Verify that an SD card is inserted and properly formatted. Check camera connections.
• മോശം വീഡിയോ നിലവാരം: Ensure camera lenses are clean. Check APP settings for resolution and WDR options.
• APP കണക്ഷൻ പ്രശ്നങ്ങൾ: Ensure your phone's WiFi is connected to the dash cam's network and mobile data is temporarily disabled. Try resetting the dash cam's WiFi password by long-pressing the red button on the wired controller.

For further assistance, please contact VSYSTO customer support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

The VSYSTO Q3 Motorcycle Dash Camera comes with a 1 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള നിർമ്മാണ വൈകല്യങ്ങളും തകരാറുകളും ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു.

For technical support, warranty claims, or any questions regarding your product, please contact VSYSTO customer service through the retailer where you purchased the product or visit the official VSYSTO webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.

വാറന്റി ആവശ്യങ്ങൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.