Radiomaster Pocket ELRS Charcoal M2 Transmitter Instruction Manual

1. ആമുഖവും അവസാനവുംview

The Radiomaster Pocket is a compact and lightweight radio transmitter designed for remote control applications, particularly for drones and other RC models. It features Hall Gimbal technology for precise control and comes pre-installed with EdgeTX firmware, offering extensive customization and functionality. Its portable design, including removable stick ends and a foldable antenna, makes it convenient for transport and storage.

Image: Radiomaster Pocket ELRS Charcoal M2 Transmitter in Charcoal color.

2. സജ്ജീകരണം

2.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The Radiomaster Pocket uses two 18650 batteries (not included with all variants). Ensure batteries are inserted with correct polarity as indicated inside the battery compartment.

Image: Radiomaster Pocket Transmitter with two 18650 batteries.

2.2 Attaching/Removing Stick Ends

The stick ends are removable for compact storage. To attach, align the stick end with the gimbal shaft and gently push and twist until secure. To remove, pull the stick end straight off.

2.3 Folding/Unfolding Antenna

The antenna is foldable for portability. Gently fold it down for storage or extend it upright for optimal signal transmission during operation.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 പവർ ഓൺ/ഓഫ്

To power on, press and hold the power button until the screen illuminates. To power off, press and hold the power button until the device shuts down.

3.2 Navigation with EdgeTX Firmware

The transmitter runs on EdgeTX firmware. Use the navigation buttons (PAGE>, PAGE<, RTN, SYS, TELE) and the scroll wheel to navigate through menus and adjust settings on the backlit LCD screen.

3.3 Joystick Calibration

Regular joystick calibration ensures accurate control. Follow the on-screen prompts in the Hardware Settings menu to perform calibration. Move both joysticks through their full range of motion during this process.

3.4 Pairing with a Drone

After calibration, proceed to pair the transmitter with your drone according to the drone's specific instructions and the selected RF protocol (e.g., ExpressLRS or CC2500). The video above also shows the pairing process.

4. സവിശേഷതകൾ

• ആന്തരിക RF ഓപ്ഷനുകൾ: Available in ExpressLRS and MPM CC2500 versions, supporting various protocols depending on the module.
• എഡ്ജ്‌ടി‌എക്സ് ഫേംവെയർ: Preinstalled for advanced functionality and customization.
• ഹാൾ ഇഫക്റ്റ് ഗിംബലുകൾ: Provides smooth centering and precise response for enhanced control.
• പോർട്ടബിൾ ഡിസൈൻ: Features removable stick ends and a foldable antenna for easy transport and storage.
• ബിൽറ്റ്-ഇൻ LED ലൈറ്റുകൾ: Helps visualize switch inputs and operational status.
• ബാക്ക്ലിറ്റ് എൽസിഡി സ്ക്രീൻ: Offers a clear display for settings and telemetry data.
• ബട്ടണുകൾ ട്രിം ചെയ്യുക: For easy and precise channel trimming.
• ബാഹ്യ മൊഡ്യൂൾ ബേ: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• ഊർജ്ജ സ്രോതസ്സ്: ദീർഘനേരം പ്രവർത്തിക്കുന്നതിന് 18650 ബാറ്ററികളുമായി പൊരുത്തപ്പെടുന്നു.
• ചാർജിംഗ്: Built-in USB-C QC3 charging.
• ഇഷ്‌ടാനുസൃതമാക്കൽ: Optional case colors (Blue, Pink, Green, Orange) are available to personalize the transmitter.

5 സ്പെസിഫിക്കേഷനുകൾ

Image: Diagram illustrating the folded and unfolded dimensions of the Radiomaster Pocket Transmitter.

6. ബോക്സിൽ എന്താണുള്ളത്?

• 1 x Radiomaster Pocket Radio Transmitter
• 1 x കസ്റ്റം കാരി പൗച്ച്
• 1 x USB-C കേബിൾ
• 1 x സ്‌ക്രീൻ പ്രൊട്ടക്ടർ
• 1 x സ്റ്റിക്കർ
• 4 x ലോ ടെൻഷൻ സ്പ്രിംഗുകൾ
• 1 x മാനുവൽ

7. പരിപാലനം

To ensure the longevity and optimal performance of your Radiomaster Pocket Transmitter, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or abrasive materials.
• സംഭരണം: Store the transmitter in its custom carry pouch in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• ബാറ്ററി കെയർ: Always use recommended 18650 batteries. Do not overcharge or over-discharge batteries. Dispose of old batteries responsibly.
• ഗിംബൽ സംരക്ഷണം: When transporting, ensure stick ends are removed or protected to prevent damage to the gimbals.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Radiomaster Pocket Transmitter, consider the following common solutions:

• ട്രാൻസ്മിറ്റർ ഓണാക്കുന്നില്ല: Ensure batteries are correctly installed and fully charged. Check the USB-C cable if charging.
• No Drone Connection: Verify that the transmitter and drone are using the same RF protocol and are correctly bound. Re-perform the pairing process if necessary.
• ക്രമരഹിത നിയന്ത്രണം: Perform a joystick calibration as described in Section 3.3. Check for any physical obstructions or damage to the gimbals.
• ഫേംവെയർ പ്രശ്നങ്ങൾ: If experiencing software glitches, consider updating or re-flashing the EdgeTX firmware via USB or the SD card, following official Radiomaster guides.
• Screen Not Displaying: Check power connection. If the issue persists, contact support.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please refer to the official Radiomaster website or contact your authorized dealer. Keep your proof of purchase for warranty claims. The manufacturer, Xiangtat, provides support for this product.