ആമുഖം
This manual provides essential instructions for the safe and effective use of your Generic 2-Pin Magnetic USB Charging Cable, designed for compatibility with the Smartwatch EVL SB1429H. Please read this manual thoroughly before use and retain it for future reference.
ഉൽപ്പന്നം കഴിഞ്ഞുview
ചിത്രം 1: The Generic 2-Pin Magnetic USB Charging Cable, showing its coiled form and both the USB-A connector and the magnetic charging head.
The Generic Magnetic Charging Cable is a replacement USB charger featuring a 2-pin magnetic connector. It is specifically designed to provide a stable and convenient charging solution for compatible smartwatches, such as the EVL SB1429H. The magnetic design ensures easy attachment and secure connection during charging.
സജ്ജമാക്കുക
- കേബിൾ അൺപാക്ക് ചെയ്യുക: Carefully remove the charging cable from its packaging.
- പവർ ഉറവിടത്തിലേക്ക് കണക്റ്റുചെയ്യുക: Insert the USB-A end of the charging cable into a compatible USB power source. This can be a computer's USB port, a USB wall adapter (not included), or a power bank. Ensure the power source provides standard USB voltage (സാധാരണ 5V).
- Prepare Smartwatch: Ensure your smartwatch is clean and dry, especially the charging contacts, before connecting the charger.
ചിത്രം 2: The USB-A connector and the magnetic charging head of the cable, illustrating the two main components for power connection and device charging.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- Align Magnetic Connector: Bring the magnetic charging head close to the charging contacts on the back of your Smartwatch EVL SB1429H. The magnets will automatically align and snap into place.
- പോളാരിറ്റി പരിശോധിക്കുക: The cable features magnetic poles. If the smartwatch does not begin charging immediately, gently detach the magnetic head, flip it 180 degrees, and re-attach it to the smartwatch contacts. This ensures correct polarity for charging.
- ചാർജിംഗ് പരിശോധിക്കുക: Once connected correctly, your smartwatch display should indicate that it is charging. If no charging indicator appears, refer to the Troubleshooting section.
- ചാർജിംഗ് സമയം: Charging time will vary depending on the smartwatch's battery level and capacity. Avoid leaving the smartwatch connected to the charger for extended periods after it is fully charged.
ചിത്രം 3: ഒരു ക്ലോസപ്പ് view of the 2-pin magnetic charging connector, highlighting the two contact points and the magnetic housing.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to gently wipe the charging cable and magnetic contacts. Do not use liquid cleaners or abrasive materials.
- സംഭരണം: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable excessively to prevent damage.
- കൈകാര്യം ചെയ്യൽ: Do not pull the cable by the cord to disconnect it. Always grasp the plug or magnetic head firmly.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Smartwatch not charging. | തെറ്റായ പോളാരിറ്റി. | Detach the magnetic head, flip it 180 degrees, and re-attach. |
| Smartwatch not charging. | Loose connection or dirty contacts. | Ensure the magnetic head is securely attached. Clean the charging contacts on both the cable and smartwatch. |
| Smartwatch not charging. | തകരാറുള്ള USB പവർ സ്രോതസ്സ്. | Try connecting the USB-A end to a different USB port or power adapter. |
| സ്ലോ ചാർജിംഗ്. | Low power output from USB source. | Use a USB wall adapter with adequate power output (e.g., 5V/1A or higher). |
സ്പെസിഫിക്കേഷനുകൾ
- ഉൽപ്പന്ന തരം: മാഗ്നറ്റിക് യുഎസ്ബി ചാർജിംഗ് കേബിൾ
- കണക്റ്റർ തരം: 2-പിൻ കാന്തിക
- USB ഇൻ്റർഫേസ്: USB-A
- കേബിൾ നീളം: ഏകദേശം 60 സെ.മീ (23.6 ഇഞ്ച്)
- Pin Spacing: ഏകദേശം 4 മി.മീ
- അനുയോജ്യത: Smartwatch EVL SB1429H and other compatible 2-pin smartwatches with 4mm pin spacing.
- ഇൻപുട്ട്: Standard USB 5V
സുരക്ഷാ വിവരങ്ങൾ
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Do not expose the cable to water or extreme temperatures.
- കേബിൾ ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ പരിഷ്ക്കരിക്കാനോ ശ്രമിക്കരുത്.
- Discontinue use if the cable appears damaged.
