Ampinvt TG-6000W48V Hybrid Solar Inverter User Manual

1. ആമുഖം

യുടെ ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, പരിപാലനം എന്നിവയ്ക്കുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ ഈ മാനുവൽ നൽകുന്നു. Ampinvt TG-6000W48V Hybrid Solar Inverter. This advanced unit integrates an inverter, AC battery charger, MPPT solar charge controller, and an AC auto-transfer switch into a single, efficient system. It is designed to provide reliable pure sine wave power for various applications, including residential, commercial, and mobile setups.

ചിത്രം 1: മുൻഭാഗം view യുടെ Ampinvt TG-6000W48V Hybrid Solar Inverter, showcasing its display and controls.

2 പ്രധാന സവിശേഷതകൾ

• സംയോജിത സംവിധാനം: Combines inverter, AC battery charger, MPPT solar charge controller, and AC auto-transfer switch.
• ഉയർന്ന കാര്യക്ഷമത: Transfer efficiency above 85%, with MPPT tracking efficiency up to 98%.
• പ്യുവർ സൈൻ വേവ് ഔട്ട്പുട്ട്: Provides continuous, stable pure sine wave output, suitable for sensitive electronics.
• Split Phase Output: Available at 240Vac (HOT1+HOT2) and 120/240Vac output simultaneously.
• Adjustable Charging Current: Max charge current adjustable from 0-35A, allowing customization or disabling of charging.
• Robust MPPT Controller: 100A MPPT controller supports 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium (LiFePO4, User Mode) batteries.
• High PV Input: Maximum PV Array Power of 5600W and MAX PV input voltag150V ഡിസിയുടെ ഇ.
• സമഗ്രമായ സംരക്ഷണങ്ങൾ: Includes battery low/high voltage alarm, over temperature, overload, and short circuit protection.
• Built-in AVR Stabilizer: Isolates surge interference and ensures stable voltage.

ചിത്രം 2: ഓവർview of the inverter's integrated features, including its 35A AC charger and 100A MPPT controller.

Figure 3: The inverter is compatible with a wide range of home and office appliances, providing 6000W continuous output.

Figure 4: The inverter supports various 48V battery chemistries, including SLD, FLD, GEL, AGM, and Lithium, with a user-configurable mode.

3. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും

3.1 സുരക്ഷാ മുൻകരുതലുകൾ

Before installation, ensure all power sources are disconnected. Always wear appropriate personal protective equipment. Consult a qualified electrician for wiring if you are unsure. Do not expose the inverter to water or excessive humidity.

3.2 മൗണ്ടിംഗ്

Mount the inverter in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure adequate clearance around the unit for proper airflow. The unit should be mounted vertically on a sturdy surface.

3.3 വയറിംഗ് കണക്ഷനുകൾ

Follow the connection diagram carefully. Ensure all connections are secure and properly insulated. Incorrect wiring can cause damage to the inverter or connected devices.

Figure 5: Comprehensive connection diagram illustrating how to integrate solar panels, utility grid, generator, battery, and various AC loads with the hybrid solar inverter.

• സോളാർ പാനൽ ഇൻപുട്ട്: Connect your solar array to the PV+ and PV- terminals. Ensure the maximum PV input voltage (150V DC) and power (5600W) are not exceeded.
• ബാറ്ററി കണക്ഷൻ: Connect the 48V battery bank to the battery terminals, observing correct polarity (positive to positive, negative to negative).
• എസി ഇൻപുട്ട്: Connect the utility grid or generator AC power to the AC input terminals.
• എസി putട്ട്പുട്ട്: Connect your AC loads (appliances, lights, etc.) to the AC output terminals. The inverter provides 120V/240V split phase output.
• ഗ്രൗണ്ടിംഗ്: Ensure the inverter is properly grounded to prevent electrical hazards.

4 ഓപ്പറേറ്റിംഗ് മോഡുകൾ

ദി Ampinvt TG-6000W48V Hybrid Solar Inverter features five distinct working modes to optimize power management based on your specific needs:

1. AC/Line Priority Mode: In this mode, the inverter prioritizes AC power from the utility grid or generator as the primary input. It provides AC output and automatically charges the connected battery bank. If AC power is unavailable, the inverter will seamlessly switch to battery power.
2. ബാറ്ററി മുൻഗണനാ മോഡ്: This mode prioritizes power supply from the battery bank. The inverter will draw power from the batteries until a low voltage protection threshold is reached. At this point, it will automatically transfer to market power (utility grid) supply. Once the battery is sufficiently recharged (e.g., by solar or AC charging), it will switch back to battery power.
3. ECO മോഡ്: Designed for energy saving, the inverter enters an automatic sleep state and stops output when the load is less than 10% of its capacity. When the load increases above 10%, the inverter automatically wakes up and resumes normal inversion.
4. ജനറേറ്റർ മോഡ്: This mode is specifically for use with unstable generator 240V power. The generator's AC output is connected to the inverter's AC input. The inverter's built-in AVR (Automatic Voltage Regulator) regulates the voltage and automatically matches the 60Hz municipal frequency, ensuring a stable output voltage within the normal operating range for your appliances.
5. ശ്രദ്ധിക്കപ്പെടാത്ത മോഡ്: ബാറ്ററി വോളിയം എപ്പോൾtage drops to a low level, the inverter enters a standby (power-saving) state. It will remain in this state until the battery voltage recovers to a user-defined value (e.g., after solar charging). Once the voltage is restored, the inverter will automatically resume normal output, enabling fully automatic, unattended operation.

5. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഇൻവെർട്ടറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു. ഇടയ്ക്കിടെ ഇനിപ്പറയുന്ന പരിശോധനകൾ നടത്തുക:

• ശുചിത്വം: Keep the inverter and its ventilation openings clean and free from dust and debris. Use a dry cloth for cleaning.
• കണക്ഷനുകൾ: Periodically check all wiring connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
• ബാറ്ററി ആരോഗ്യം: Monitor your battery bank's health according to the battery manufacturer's guidelines. Ensure proper charging and discharge cycles.
• പരിസ്ഥിതി: ഇൻസ്റ്റലേഷൻ പരിസ്ഥിതി നിർദ്ദിഷ്ട താപനിലയിലും ഈർപ്പത്തിലും പരിധിക്കുള്ളിൽ തുടരുന്നുവെന്ന് ഉറപ്പാക്കുക.

6. പ്രശ്‌നപരിഹാരം

This section provides solutions to common issues you might encounter. For problems not listed here, contact customer support.

7 സ്പെസിഫിക്കേഷനുകൾ

Figure 6: Physical dimensions of the inverter and a list of items included in the package.

8. ബോക്സിൽ എന്താണുള്ളത്?

പായ്ക്ക് അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഇനങ്ങളും അവിടെയുണ്ടെന്ന് ദയവായി ഉറപ്പാക്കുക:

• 1 x Ampinvt TG-6000W48V Hybrid Solar Inverter
• 1 x Battery Cable
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

9. വാറൻ്റിയും പിന്തുണയും

This product comes with a manufacturer's warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or contact the manufacturer directly. For technical support, troubleshooting assistance, or spare parts, please reach out to OAE customer service through their official channels.

ചിത്രം 7: ദി Ampinvt Hybrid Solar Inverter is suitable for a wide range of practical applications, from residential homes to remote base stations.