MIPRO ACT-312/ACT-32T2 Dual-Channel Bodypack Wireless System User Manual

ആമുഖം

The MIPRO ACT-312/ACT-32T2 Dual-Channel Bodypack Wireless System is designed for professional audio applications, providing crystal-clear sound transmission for singers, presenters, and performers. This system features a dual-channel UHF receiver (ACT-312) and two bodypack transmitters (ACT-32T2), allowing simultaneous operation of two microphones. Key features include MIPRO's Automatic Channel Targeting (ACT) technology for streamlined synchronization, AutoScan for interference-free frequency selection, and diversity technology to minimize signal dropouts.

Image: The MIPRO ACT-312 Dual-Channel Receiver is shown at the bottom, a black rectangular unit with a green digital display and control knobs. Two MIPRO ACT-32T2 Bodypack Transmitters are positioned above the receiver, each with a green display and an antenna. The entire system is black, indicating its professional design.

സജ്ജമാക്കുക

Proper setup ensures optimal performance and reliable wireless operation.

1. അൺപാക്കിംഗും പരിശോധനയും: Carefully unpack all components. Verify that the package contains the ACT-312 receiver, two ACT-32T2 bodypack transmitters, antennas, power adapter, and any included accessories. Inspect for any visible damage.
2. റിസീവർ പ്ലേസ്മെന്റ്: Place the ACT-312 receiver on a stable, flat surface, away from large metal objects or other wireless devices that may cause interference. Ensure adequate ventilation around the unit.
3. ആന്റിന കണക്ഷൻ: Screw the provided antennas firmly onto the antenna connectors on the rear of the ACT-312 receiver. Position them vertically for best reception.
4. പവർ കണക്ഷൻ: Connect the supplied power adapter to the DC input on the rear of the ACT-312 receiver, then plug it into a suitable AC power outlet.
5. ഓഡിയോ ഔട്ട്പുട്ട് കണക്ഷൻ: Connect the audio output of the ACT-312 receiver to your mixer, amplifier, or audio interface using appropriate XLR or 1/4" cables (not included).
6. ട്രാൻസ്മിറ്റർ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: Open the battery compartment on each ACT-32T2 bodypack transmitter and insert two fresh AA batteries, observing polarity.
7. Microphone Connection (Transmitter): Connect your lavalier or headset microphone (compatible with MIPRO's mini-XLR connector) to the input jack on the ACT-32T2 bodypack transmitter.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for effective operation of your wireless system.

1. പവർ ഓൺ:
   • Turn on the ACT-312 receiver using the power button on the front panel. The display will illuminate.
   • Turn on each ACT-32T2 bodypack transmitter by pressing and holding its power button.
2. Frequency Scan (AutoScan):
   • On the ACT-312 receiver, press the "Scan" button. The receiver will automatically scan for the clearest available frequencies in your environment.
   • Once a clear frequency is found, the receiver will display it.
3. Transmitter-Receiver Synchronization (ACT):
   • With the receiver displaying the desired frequency, align the IR port on the ACT-32T2 bodypack transmitter with the IR port on the ACT-312 receiver (usually located on the front panel).
   • Press the "ACT" button on the receiver. The frequency information will be automatically transferred to the transmitter. The transmitter's display should now match the receiver's frequency. Repeat for the second transmitter.
4. ക്രമീകരണം നേടുക:
   • Adjust the gain (input sensitivity) on each ACT-32T2 bodypack transmitter to prevent distortion. Start with a lower setting and gradually increase it while speaking or singing into the microphone at your typical performance level. The receiver's RF and AF indicators will help monitor signal strength and audio levels.
5. സിസ്റ്റം ടെസ്റ്റ്:
   • Speak or sing into the connected microphone. Verify that audio is being received by the ACT-312 receiver and outputted to your sound system. Adjust the receiver's volume control as needed.

മെയിൻ്റനൻസ്

Regular maintenance helps prolong the life and performance of your wireless system.

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to wipe down the receiver and transmitters. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
• ബാറ്ററി മാനേജ്മെൻ്റ്:
  • Replace batteries in the bodypack transmitters when the low battery indicator appears or when audio quality degrades.
  • Remove batteries from transmitters if the system will not be used for an extended period to prevent leakage and damage.
• സംഭരണം: Store the system in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If transporting, use a padded case to protect components from physical shock.
• ആന്റിന കെയർ: Ensure antennas are not bent or damaged. Handle them carefully when connecting or disconnecting.

ട്രബിൾഷൂട്ടിംഗ്

പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ ഈ വിഭാഗം കാണുക.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official MIPRO webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

• വാറൻ്റി: Specific warranty terms and duration may vary by region and retailer. Consult the documentation provided with your purchase or the manufacturer's webവിശദാംശങ്ങൾക്ക് സൈറ്റ്.
• സാങ്കേതിക സഹായം: For assistance with setup, operation, or troubleshooting beyond this manual, contact MIPRO customer support or your local distributor.