Elation Professional Magmatic Magma Fog 1500IP-II Fog Machine User Manual

1. ആമുഖം

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Elation Professional Magmatic Magma Fog 1500IP-II Fog Machine. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

The Magma Fog 1500IP-II is a high-performance, 1500W water-based fog machine designed for professional applications. It features an IP67 rating, making it suitable for outdoor use, and offers a maximum output of 60,000 cubic feet per minute (CFM). Control options include an onboard LCD touchscreen and DMX-512/RDM.

ചിത്രം 1.1: മുൻവശം view of the Magmatic Magma Fog 1500IP-II Fog Machine, showcasing its robust design and integrated fluid tank.

2 സുരക്ഷാ വിവരങ്ങൾ

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury.

• ഇലക്ട്രിക്കൽ സുരക്ഷ: ശരിയായ വോള്യം ഉള്ള ഒരു ഗ്രൗണ്ടഡ് പവർ ഔട്ട്‌ലെറ്റിലേക്ക് യൂണിറ്റ് ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.tage (120V, 60Hz). Disconnect power before performing any maintenance or cleaning.
• ബേൺ അപകടം: The front nozzle and surrounding areas become extremely hot during operation. WARNING! BURN HAZARD! THE FRONT NOZZLE REACHES HIGH TEMPERATURES. DO NOT TOUCH NOZZLE AFTER POWERING OFF. Allow sufficient cooling time (at least 30 minutes) after use.
• Fluid Safety: Use only approved water-based fog fluid. Do not ingest fog fluid. In case of contact with skin or eyes, rinse thoroughly with water. Keep out of reach of children.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation around the machine. Do not block air vents.
• പ്ലേസ്മെൻ്റ്: Do not tilt the machine more than 30 degrees while in use. Place the machine on a stable, level surface. Keep flammable materials away from the unit.
• ഔട്ട്ഡോർ ഉപയോഗം: The unit is IP67 rated for outdoor use, but ensure all connections are properly sealed and protected from direct water spray into openings.

ചിത്രം 2.1: മുൻഭാഗം view highlighting the burn hazard warning label near the fog output nozzle. Always observe this warning.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Magma Fog 1500IP-II is engineered for reliability and performance. Key components include:

• Fog Output Nozzle: മൂടൽമഞ്ഞ് പുറപ്പെടുവിക്കുന്ന മുൻവശത്ത് സ്ഥിതിചെയ്യുന്നു.
• ദ്രാവക ടാങ്ക്: A 5-liter (1.32 gallon) removable tank for fog fluid.
• നിയന്ത്രണ പാനൽ: Onboard LCD touchscreen for direct control and settings adjustment.
• പവർ ഇൻപുട്ട്: IP65 locking power connector.
• DMX ഇൻ/ഔട്ട്: IP65 locking 5-pin XLR connectors for DMX-512 and RDM control.
• വിദൂര ഇൻപുട്ട്: For optional wired or wireless remote control.
• കൈപ്പിടികൾ: Two heavy-duty handles for transport.
• ഹാംഗിംഗ് ബ്രാക്കറ്റ്: For truss mounting applications.

ചിത്രം 3.1: പിൻഭാഗം view of the unit, displaying the LCD touchscreen control panel, power input, DMX connections, and remote input.

4. സജ്ജീകരണം

4.1 അൺപാക്കിംഗ്

1. Carefully remove the fog machine from its packaging.
2. Inspect the unit for any signs of damage during shipping. Contact your dealer immediately if damage is found.
3. ഭാവിയിലെ ഗതാഗതത്തിനോ സംഭരണത്തിനോ വേണ്ടി യഥാർത്ഥ പാക്കേജിംഗ് സൂക്ഷിക്കുക.

4.2 Fluid Tank Installation and Filling

1. Locate the fluid tank compartment on the top of the unit.
2. Remove the empty fluid tank.
3. ടാങ്ക് നിറയ്ക്കുക Magmatic brand water-based fog fluid only. Using other fluid types may damage the unit and void the warranty.
4. Securely replace the fluid tank, ensuring the fluid hose is properly submerged and connected.

4.3 പവർ കണക്ഷൻ

1. Connect the supplied IP65 locking power cable to the power input on the rear of the unit.
2. Connect the other end of the power cable to a suitable grounded electrical outlet (120V, 60Hz).

4.4 DMX കണക്ഷൻ (ഓപ്ഷണൽ)

1. For DMX control, connect a 5-pin DMX cable from your DMX controller to the DMX IN port on the fog machine.
2. To daisy-chain multiple units, connect a DMX cable from the DMX OUT port of the first unit to the DMX IN port of the next unit.
3. Ensure all DMX cables are IP65 rated for outdoor use if applicable.

4.5 മൗണ്ടിംഗ്

The unit includes a hanging bracket for truss mounting. Ensure the mounting surface or truss system can safely support the weight of the unit (74.3 lbs / 33.7 kg) and any accessories. Use appropriate clamps and safety cables (not included) for secure installation.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Powering On and Warm-up

1. After connecting power, the unit will begin its initial warm-up sequence.
2. The thermally protected heat exchanger requires approximately 14 minutes to reach optimal operating temperature.
3. The LCD touchscreen will display the warm-up status. The unit is ready for operation once the status indicates 'Ready'.

5.2 Onboard LCD Touchscreen Control

The intuitive LCD touchscreen allows direct control over various functions:

• Manual Fog Output: Activate fog output manually.
• ടൈമർ ക്രമീകരണങ്ങൾ: Program timed fog bursts and intervals.
• വോളിയം നിയന്ത്രണം: Adjust the fog output intensity.
• ഡിഎംഎക്സ് വിലാസം: Set the DMX start address for remote control.
• സിസ്റ്റം വിവരങ്ങൾ: View operational data and status.

5.3 DMX-512 and RDM Control

The Magma Fog 1500IP-II supports DMX-512 and RDM (Remote Device Management) for integration into professional lighting and effects systems. Refer to the DMX chart in the appendix (if provided separately) for specific channel assignments and control values. RDM allows for remote configuration and monitoring of the device.

5.4 ഓപ്ഷണൽ റിമോട്ട് കൺട്രോൾ

The unit is compatible with optional wired and wireless remote controls (sold separately). Connect the remote to the 'REMOTE IN' port on the rear of the unit. Consult the remote control's manual for specific operating instructions.

6. പരിപാലനം

Regular maintenance ensures optimal performance and extends the lifespan of your fog machine.

6.1 വൃത്തിയാക്കൽ

• പുറം: പുറംഭാഗം തുടയ്ക്കുക casinഗ്രാം വിത്ത് എ സോഫ്റ്റ്, ഡിamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• നോസൽ: Periodically check the fog nozzle for any blockages. If necessary, gently clean with a small brush after the unit has completely cooled.
• ദ്രാവക സംവിധാനം: It is recommended to run a cleaning solution (specifically designed for fog machines) through the system every 200 hours of operation or before long periods of storage to prevent clogs.

6.2 Fluid Handling and Storage

• Always store fog fluid in a cool, dark place, away from direct sunlight and extreme temperatures.
• Ensure the fluid tank is securely capped when not in use.
• If storing the machine for an extended period (more than 30 days), empty the fluid tank and run a cleaning solution through the system.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter. If a problem persists, contact qualified service personnel.

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the Magmatic Magma Fog 1500IP-II.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official Elation Professional webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Elation Professional Customer Support: സഹായത്തിന്, സന്ദർശിക്കുക www.elationlighting.com/support അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ ബന്ധപ്പെടുക.