1. ആമുഖം
Thank you for choosing the llano CS3 2-in-1 NP-W126S Dual Battery Charger and Power Bank. This versatile device is designed to provide reliable power for your Fujifilm cameras and other USB-C compatible devices. It combines a high-capacity 12400mAh power bank with a dual-slot fast charger, ensuring your equipment stays powered during extended use or travel.
Image 1: The llano CS3 2-in-1 NP-W126S Dual Battery Charger and Power Bank.
2. ഉൽപ്പന്ന സവിശേഷതകൾ
- High-Capacity Power Bank: Features a built-in 12400mAh battery, capable of fully recharging multiple NP-W126S batteries or other devices.
- 2-ഇൻ-1 പ്രവർത്തനം: Serves as both a dual-slot camera battery charger and a portable power bank.
- 20W ഫാസ്റ്റ് ചാർജിംഗ്: Equipped with PD3.0 & QC3.0 technology for rapid charging, up to 58% faster than standard chargers. Charges two NP-W126S batteries to 100% in approximately 2 hours.
- ചാർജിംഗ് വഴി കടന്നുപോകുക: Allows simultaneous charging of the internal power bank and inserted camera batteries.
- സ്മാർട്ട് ഡിജിറ്റൽ ഡിസ്പ്ലേ: An integrated LED display provides real-time battery levels for both inserted camera batteries and the internal power bank.
- വിപുലമായ സുരക്ഷാ പരിരക്ഷ: Incorporates ten layers of intelligent protection, including thermal control, overcharge prevention, and short-circuit shielding.
- ഒതുക്കമുള്ളതും പോർട്ടബിൾ ഡിസൈൻ: Designed for travel and outdoor use, with dimensions of 5.83 x 2.01 x 3.43 inches.
Image 2: The llano CS3 functions as a built-in power bank.
3. സജ്ജീകരണം
3.1 പവർ ബാങ്കിന്റെ പ്രാരംഭ ചാർജിംഗ്
- Connect a 20W Power Delivery (PD) compatible USB-C charger (not included) to one of the USB-C IN/OUT ports on the side of the llano CS3.
- The digital display will illuminate, showing the charging status of the internal power bank. A full charge typically takes approximately 2 hours.
3.2 Inserting Camera Batteries
- Open the top cover of the charger.
- Align your NP-W126S batteries with the charging slots (CH1 and CH2) and gently insert them until they click into place.
- മുകളിലെ കവർ അടയ്ക്കുക.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 Charging Camera Batteries
- Ensure the llano CS3 has sufficient internal charge or is connected to an external power source.
- Insert up to two NP-W126S batteries into the designated slots as described in the Setup section.
- The smart digital display will show the individual charging progress for each battery (CH1 and CH2).
- Charging two NP-W126S batteries from 0% to 100% takes approximately 2 hours when using a 20W PD charger.
Image 3: The llano CS3 can charge two NP-W126S batteries simultaneously.
4.2 Using as a Power Bank for External Devices
- Connect your USB-C compatible device (e.g., smartphone, tablet) to one of the USB-C IN/OUT ports on the side of the llano CS3 using a compatible USB-C cable.
- The llano CS3 will automatically begin charging your device. The digital display will show the remaining charge of the internal power bank.
4.3 പാസ്-ത്രൂ ചാർജിംഗ്
The llano CS3 supports pass-through charging. This means you can connect the charger to an external power source to recharge its internal battery while simultaneously charging camera batteries inserted into the slots.
4.4 ഡിജിറ്റൽ ഡിസ്പ്ലേ വിവരങ്ങൾ
The integrated digital LED display provides the following information:
- Internal Power Bank Level: Shows the remaining percentage of the built-in 12400mAh power bank.
- Camera Battery Levels (CH1 & CH2): Displays the charging status (25%/50%/75%/100%) for each inserted NP-W126S battery.
- ഫാസ്റ്റ് ചാർജിംഗ് ഇൻഡിക്കേറ്റർ: Indicates when fast charging is active.
Image 4: The smart digital display provides real-time charging status.
5 അനുയോജ്യത
5.1 Compatible Camera Batteries
The llano CS3 is specifically designed for Fujifilm NP-W126S batteries and is compatible with a wide range of Fujifilm X-Series cameras, including but not limited to:
- Fujifilm XT30II, X100VI, X-M5, XE-5, XS10, XT3, XT2, XT1, XT30, XT20, XT10, X100V, XT200, XT100, X100F, XA7, XE3, Xpro3, Xpro2, Xpro1, XE1, XE2, XE2S, XM1, XA3, XA5, XA10, XH1.
5.2 Compatible USB-C Devices
In addition to camera batteries, the llano CS3 can charge various USB-C powered devices, such as:
- Smartphones (e.g., iPhone 16, Samsung Galaxy S25)
- Tablets (e.g., iPad Pro)
- Other small electronic devices with USB-C charging ports.
Image 5: The llano CS3 is compatible with various Fujifilm cameras and USB-C devices.
6 സുരക്ഷാ വിവരങ്ങൾ
To ensure safe operation and prevent damage to the device or personal injury, please observe the following safety guidelines:
- Do not disassemble or modify the charger. Unauthorized modifications can lead to malfunction, electric shock, or fire.
- Do not immerse the charger in water or expose it to excessive moisture.
- Avoid extreme temperatures. Do not expose the charger to direct sunlight, heat sources, or very cold environments.
- Use only compatible NP-W126S batteries and USB-C cables.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- The charger is equipped with multiple protection layers including overcharge, over-current, short-circuit, and thermal protection. If an issue occurs, disconnect the charger immediately.
Image 6: The llano CS3 is designed for safe travel and use.
7. പരിപാലനം
7.1 വൃത്തിയാക്കൽ
- Ensure the charger is disconnected from all power sources and devices before cleaning.
- Wipe the exterior of the charger with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Keep the charging slots and USB ports free from dust and debris.
7.2 സംഭരണം
- നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും തീവ്രമായ താപനിലയിൽ നിന്നും മാറി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് ചാർജർ സൂക്ഷിക്കുക.
- If storing for an extended period, it is recommended to charge the internal power bank to approximately 50-70% every few months to maintain battery health.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Charger not turning on/display not lighting up. | Internal battery is depleted. | Connect the charger to a 20W PD compatible USB-C power source. |
| Camera batteries not charging. | Batteries not inserted correctly; internal power bank is depleted; charger is not connected to external power. | Ensure batteries are fully seated. Recharge the internal power bank or connect the charger to an external power source. |
| ബാഹ്യ ഉപകരണം ചാർജ് ചെയ്യുന്നില്ല. | Device not USB-C compatible; cable is faulty; internal power bank is depleted. | Verify device compatibility. Try a different USB-C cable. Recharge the internal power bank. |
| Digital display shows less than 100% when fully charged. | This can sometimes occur due to battery calibration or specific charging conditions. | If the camera indicates 100% charge, the battery is fully charged. If issues persist, contact customer support. |
| ചാർജിംഗ് മന്ദഗതിയിലാണ്. | Using a non-PD/QC compatible charger or cable; multiple devices/batteries charging simultaneously. | Ensure you are using a 20W PD compatible charger and a high-quality USB-C cable. Fast charging performance may vary when charging multiple items. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ലാനോ |
| മോഡൽ നമ്പർ | CS3 |
| നിറം | കറുപ്പ് |
| ആന്തരിക ബാറ്ററി ശേഷി | 12400mAh |
| Charging Time (2x NP-W126S) | ഏകദേശം 2 മണിക്കൂർ |
| Charging Time (Internal Power Bank) | Approx. 2 Hours (with 20W PD charger) |
| ഇൻപുട്ട്/ഔട്ട്പുട്ട് പോർട്ടുകൾ | USB-C (20W PD3.0 & QC3.0) |
| Compatible Camera Batteries | Fujifilm NP-W126S |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Fujifilm X-series cameras (e.g., XT30II, X100VI, X-M5, XE-5, XS10, XT3, XT2, XT30, XT20, XT10, X100V, XT200, XT100, X100F, XA7, XE3, Xpro3, Xpro2, Xpro1, XE1, XE2, XE2S, XM1, XA3, XA5, XA10, XH1), USB-C smartphones, tablets. |
| ഇനത്തിൻ്റെ അളവുകൾ | 5.83 x 2.01 x 3.43 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 13.6 ഔൺസ് |
| നിർമ്മാതാവ് | SHENZHEN GREEN GIANT ENERGY TECHNOLOGY DEVELOPMENT CO.,LTD |
10. വീഡിയോ പ്രദർശനം
Video 1: Official product video demonstrating the llano NP-W126S Battery Portable Charger for Fujifilm X100VI, highlighting its features and use in various scenarios.
11. വാറൻ്റിയും പിന്തുണയും
11.1 വാറൻ്റി വിവരങ്ങൾ
The llano CS3 2-in-1 NP-W126S Dual Battery Charger and Power Bank comes with a 1-Year Protection Plan. Please retain your proof of purchase for warranty claims.
11.2 ഉപഭോക്തൃ പിന്തുണ
For technical assistance, warranty inquiries, or any other support needs, please contact llano customer service:
- യുഎസ് & കാനഡ: support.na@llanopower.com
- യുകെയും ഇയുവും: support.eu@llanopower.com
- ജപ്പാൻ: support.jp@llanopower.com
- മറ്റ് പ്രദേശങ്ങൾ: support.me@llanopower.com