Flylin Type-C 10W Wireless Charging Receiver Instruction Manual

1. ആമുഖം

This manual provides essential information for the proper setup, operation, and maintenance of your Flylin Type-C 10W Wireless Charging Receiver. Please read these instructions carefully before use to ensure optimal performance and safety.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Flylin Type-C Wireless Charging Receiver
• 1 x Magnetic Charging Cable (1 meter length)

3. ഉൽപ്പന്ന സവിശേഷതകൾ

• മടക്കാവുന്ന പ്ലഗ് ഡിസൈൻ: Enhances portability and prevents scratching of other items.
• പ്ലഗ് ആൻഡ് പ്ലേ അനുയോജ്യത: Designed for all mobile phones with a Type-C interface, offering broad application.
• Stable and Efficient Charging: Features low heat generation, pure electric copper coils, and optimized circuitry for consistent performance.
• വൈവിധ്യമാർന്ന ചാർജിംഗ് ഓപ്ഷനുകൾ: Supports both wireless charging and magnetic suction charging via the included cable.
• Integrated Safety Functions: Equipped with an MCU and charge management IC chip for multiple protections against overcurrent, overvoltagഇ, അമിത ചൂടാക്കൽ, ഷോർട്ട് സർക്യൂട്ടുകൾ.

4 സ്പെസിഫിക്കേഷനുകൾ

Figure 1: Dimensions of the Wireless Charging Receiver. The receiver measures 4.6 cm (1.81 inches) in width and 10.9 cm (4.29 inches) in length.

5. സജ്ജീകരണ ഗൈഡ്

Follow these steps to prepare your wireless charging receiver for use:

1. ഫോണിലേക്ക് ബന്ധിപ്പിക്കുക: Insert the Type-C plug of the receiver into your smartphone's Type-C charging port. Ensure it is fully seated.
2. സ്ഥാനം സ്വീകരിക്കുന്നയാൾ: Gently adhere the receiver pad to the back of your phone. For optimal wireless charging, align the receiver's charging coil with the center of your phone's back.
3. സുരക്ഷിതം (ഓപ്ഷണൽ): If using a phone case, place the case over the receiver and phone. Ensure the case is not too thick, as this may interfere with wireless charging efficiency.

Figure 2: Proper attachment of the wireless charging receiver to a smartphone. The Type-C connector is plugged into the phone's port, and the receiver pad is positioned on the back.

Figure 3: Connection diagram showing the Type-C plug inserted into the phone and the magnetic cable connecting to the receiver's extension.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Flylin Wireless Charging Receiver offers two charging methods:

6.1. വയർലെസ് ചാർജിംഗ്

1. Ensure the receiver is correctly attached to your phone as described in the Setup Guide.
2. Place your phone, with the receiver attached, onto a compatible Qi wireless charging pad.
3. Align the phone and receiver with the charging pad's coil. Charging will begin automatically. Your phone's screen should indicate charging status.

Figure 4: Phone with receiver placed on a wireless charging pad. The blue arcs indicate active wireless charging.

6.2. Magnetic Cable Charging

1. Ensure the receiver is correctly attached to your phone.
2. Connect the magnetic charging cable to a USB power source (e.g., wall adapter, computer USB port).
3. Attach the magnetic end of the cable to the magnetic port on the receiver's extension. The magnetic connection will snap into place.
4. Your phone will begin charging via the magnetic cable.

7. പരിപാലനം

To ensure the longevity and proper function of your charging receiver:

• Keep the receiver and cable clean and dry. Avoid exposure to liquids.
• Do not bend or twist the Type-C connector or the receiver pad excessively.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
• തീവ്രമായ താപനില ഒഴിവാക്കുക.

8. പ്രശ്‌നപരിഹാരം

നിങ്ങൾക്ക് പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പരിഹാരങ്ങൾ പരിശോധിക്കുക:

• ചാര്ജ്ജ് ആകുന്നില്ല:
  • Ensure the Type-C plug is fully inserted into your phone.
  • For wireless charging, verify that the receiver is properly aligned with the wireless charging pad.
  • Check if your wireless charging pad or magnetic cable is connected to a working power source.
  • Ensure your phone case is not too thick (over 5mm) or contains metal, which can interfere with wireless charging.
• സ്ലോ ചാർജിംഗ്:
  • Confirm your power adapter provides sufficient output (e.g., 5V/2A or higher for 10W charging).
  • Ensure proper alignment between the receiver and the wireless charging pad.
  • Avoid using your phone for intensive tasks while charging.
• അമിത ചൂടാക്കൽ:
  • Slight warmth during charging is normal. If the device becomes excessively hot, discontinue use immediately.
  • Ensure there are no foreign objects between the phone/receiver and the charging pad.
  • Remove the phone case to check if it's contributing to heat buildup.

9 സുരക്ഷാ വിവരങ്ങൾ

ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

• ഉപകരണം സ്വയം ഡിസ്അസംബ്ലിംഗ് ചെയ്യുകയോ പരിഷ്കരിക്കുകയോ നന്നാക്കുകയോ ചെയ്യരുത്.
• വെള്ളം, തീ, ഉയർന്ന താപനില എന്നിവയിൽ നിന്ന് അകന്നു നിൽക്കുക.
• ശക്തമായ ആഘാതങ്ങൾക്ക് ഉപകരണം ഇടുകയോ ഇടുകയോ ചെയ്യുന്നത് ഒഴിവാക്കുക.
• Do not use if the device appears damaged.
• The integrated safety features protect against overcurrent, overvoltage, overheating, and short circuits. However, always use the product responsibly.

10. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact Flylin customer service through your purchase platform or the official Flylin website. Please have your model number (JY2024098-01) and purchase details ready.