ISDT PC-4860S Lipo Battery Safe Parallel Charging Board

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The ISDT PC-4860S is a safe parallel charging board designed for charging multiple 1S to 8S LiPo batteries simultaneously. It features XT60 connectors and balance ports, providing a secure and efficient solution for managing your RC battery charging needs. The board is constructed with an aluminum case for enhanced safety and heat dissipation.

ചിത്രം 1: മുകളിൽ നിന്ന് താഴേക്ക് view of the ISDT PC-4860S Safe Parallel Charging Board, showing four XT60 output ports and the main XT60 input port.

പ്രധാന സവിശേഷതകൾ:

• Safe Parallel Charging: Supports charging of 1S to 8S LiPo batteries.
• ഒന്നിലധികം ചാനലുകൾ: Four independent output channels for parallel charging.
• ഉയർന്ന നിലവിലെ ശേഷി: Max input current of 40A, max output current of 30A per port.
• Integrated Fuses: Equipped with 32 fuses for enhanced safety against overcurrent.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Aluminum case designed to prevent explosions or fires and ensure efficient heat dissipation.
• കോംപാക്റ്റ് ഡിസൈൻ: Optimized size for portability and ease of use.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ കൊടുത്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x ISDT PC-4860S Lipo Charging Plate
• 1 x XT60 Charging Cable
• 1 x 6S Lipo Battery Balance Cable

Figure 2: The ISDT PC-4860S board shown with the XT60 charging cable and the 6S balance cable.

3 സുരക്ഷാ വിവരങ്ങൾ

Read and understand all safety warnings and instructions before using this product. Failure to do so may result in fire, injury, or property damage.

• Always use this parallel charging board with a compatible LiPo battery charger.
• Ensure all batteries connected for parallel charging have the same cell count (e.g., all 3S, all 4S) and are at a similar voltage level. Charging batteries with different cell counts or significantly different voltages in parallel can be dangerous.
• Never exceed the maximum input current of 40A or the maximum output current of 30A per port.
• Do not charge damaged, swollen, or punctured batteries.
• Always charge batteries in a fire-safe area, away from flammable materials.
• Supervise the charging process at all times.
• വെള്ളം, ഈർപ്പം, തീവ്രമായ താപനില എന്നിവയിൽ നിന്ന് ഉപകരണം അകറ്റി നിർത്തുക.
• ഈ ഉൽപ്പന്നം ഒരു കളിപ്പാട്ടമല്ല. കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

4. സജ്ജീകരണം

1. ചാർജറുമായി ബന്ധിപ്പിക്കുക: Connect the main XT60 charging cable (included) from the ISDT PC-4860S board's input port to the output port of your compatible LiPo battery charger.
2. Connect Balance Cable: Connect the 6S balance cable (included) from the balance port on the ISDT PC-4860S board to the balance port on your charger. If charging batteries with a cell count less than 6S, ensure your charger's balance port is compatible or use an appropriate adapter (not included).
3. ബാറ്ററികൾ തയ്യാറാക്കുക: Ensure all batteries you intend to charge in parallel have the same cell count (e.g., all 3S, all 4S) and are at a similar voltage.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for safe parallel charging:

1. ബാറ്ററികൾ ബന്ധിപ്പിക്കുക: Connect up to four LiPo batteries to the XT60 output ports on the ISDT PC-4860S board. Ensure each battery's main power lead (XT60) and balance lead are correctly connected to the corresponding ports on the parallel board.
2. Set Charger Parameters: On your LiPo battery charger, set the charging parameters for the total capacity of all connected batteries. For example, if you are charging four 2200mAh 3S batteries, set your charger to charge a single 3S battery at 8800mAh (4 x 2200mAh).
3. ചാർജിംഗ് ആരംഭിക്കുക: Initiate the charging process on your LiPo charger. Monitor the charging progress and battery conditions closely.
4. ബാറ്ററികൾ വിച്ഛേദിക്കുക: Once charging is complete, first stop the charging process on your charger. Then, disconnect the batteries from the parallel board, starting with the balance leads, then the main power leads. Finally, disconnect the parallel board from the charger.

പ്രധാനപ്പെട്ടത്: Always connect the main power leads and balance leads of the batteries to the parallel board before starting the charger. Disconnect the batteries from the parallel board before disconnecting the parallel board from the charger.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Use a dry, soft cloth to clean the surface of the parallel board. Do not use liquids or solvents.
• സംഭരണം: Store the board in a cool, dry place away from direct sunlight and moisture when not in use.
• പരിശോധന: Periodically inspect the XT60 connectors and balance ports for any signs of wear, damage, or corrosion. Ensure all cables are in good condition.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 3: The ISDT PC-4860S board highlighting maximum input and output current specifications.

• മോഡൽ: PC-4860S
• വലിപ്പം: 88 x 58 x 16 മിമി (3.46"D x 2.28"W x 0.67"H)
• ആകെ ഭാരം: 247.5 ഗ്രാം
• പരമാവധി ഇൻപുട്ട് കറന്റ്: 40എ
• പരമാവധി ഔട്ട്പുട്ട് കറൻ്റ്: 30A/പോർട്ട്
• Max Balance Current: 2A
• Balance Cells: 1S~8S
• പ്ലഗ് തരം: XT60
• തുറമുഖങ്ങളുടെ എണ്ണം: 4
• സുരക്ഷാ സവിശേഷതകൾ: 32pcs Fuses, Aluminum case
• സർട്ടിഫിക്കേഷൻ: CE

9. വാറൻ്റി വിവരങ്ങൾ

The ISDT PC-4860S Lipo Battery Safe Parallel Charging Board comes with a ഒരു വർഷത്തെ വാറൻ്റി from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or improper installation.

For warranty claims, please retain your proof of purchase and contact ISDT customer support.

10. പിന്തുണ

For further assistance, technical support, or inquiries regarding the ISDT PC-4860S, please visit the official ISDT store or contact their customer service department.

ISDT Official Store: https://www.amazon.com/stores/ISDTOfficial/page/CD66BDD7-E050-477A-B081-1CA75B65F070