1. ഉൽപ്പന്നം കഴിഞ്ഞുview
These Ceramic Low Dust Rear Brake Pads are designed to provide reliable and consistent braking performance for your vehicle. Manufactured by Generic, these pads are engineered for reduced dust output and quiet operation, making them an excellent choice for daily driving. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your new brake pads.
ചിത്രം 1: മുകളിൽ view of the Ceramic Low Dust Rear Brake Pads, showing the ceramic friction material and part markings.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the safe and effective operation of your brake pads. It is highly recommended that installation be performed by a qualified automotive technician. If you choose to install them yourself, ensure you have the necessary tools and follow all safety precautions.
2.1 സുരക്ഷാ മുൻകരുതലുകൾ
- എല്ലായ്പ്പോഴും ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക , including safety glasses and gloves.
- ജോലി ആരംഭിക്കുന്നതിന് മുമ്പ് വാഹനം നിരപ്പായ പ്രതലത്തിലുള്ള ജാക്ക് സ്റ്റാൻഡുകളിൽ സുരക്ഷിതമായി ഉറപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- ജാക്ക് മാത്രം താങ്ങിനിർത്തുന്ന വാഹനത്തിനടിയിൽ ഒരിക്കലും പ്രവർത്തിക്കരുത്.
- Consult your vehicle's service manual for specific torque specifications and procedures.
- Brake fluid is corrosive; avoid contact with skin and painted surfaces.
2.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ (പൊതു ഗൈഡ്)
- Safely lift and support the vehicle, then remove the rear wheels.
- Locate the brake caliper and remove the caliper mounting bolts.
- Carefully remove the old brake pads. Note their orientation.
- Inspect the brake rotor for wear, scoring, or warping. Replace or resurface if necessary.
- Clean the caliper and caliper bracket thoroughly.
- Compress the caliper piston(s) using a suitable tool.
- Install the new Ceramic Low Dust Rear Brake Pads into the caliper bracket, ensuring they are correctly seated.
- Reinstall the brake caliper and tighten the mounting bolts to the manufacturer's specified torque.
- മറുവശത്ത് ആവർത്തിക്കുക.
- ചക്രങ്ങൾ വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്ത് വാഹനം താഴ്ത്തുക.
- Pump the brake pedal several times to ensure the pads are seated against the rotors and the pedal feels firm before driving.
ചിത്രം 2: വശം view of the brake pads, highlighting the ceramic friction material.
3. Operating and Break-In Procedure
After installing new brake pads, a proper break-in procedure is essential to ensure optimal performance, reduce noise, and extend pad life. This process helps to transfer a thin layer of friction material to the rotor surface, which is critical for effective braking.
3.1 Break-In (Bedding-In) Procedure
- കുറഞ്ഞ ഗതാഗതമുള്ള സുരക്ഷിതവും തുറന്നതുമായ ഒരു പ്രദേശം കണ്ടെത്തുക.
- ഏകദേശം 35 mph (55 km/h) വേഗത കൈവരിക്കുക.
- Apply moderate braking pressure to slow down to about 10 mph (15 km/h). Do not come to a complete stop.
- Release the brakes and drive for a short distance (approx. 30 seconds) to allow the pads and rotors to cool slightly.
- ഈ പ്രക്രിയ 8-10 തവണ ആവർത്തിക്കുക.
- After the last stop, drive for several minutes without braking to allow the system to cool down completely.
During the break-in period, avoid hard braking, sudden stops, or prolonged braking (e.g., long downhill descents) for the first 200-300 miles (320-480 km). You may notice a slight burning smell during the break-in; this is normal.
4. പരിപാലനം
Regular inspection and timely replacement are key to maintaining your vehicle's braking system. These ceramic pads are designed for low dust and long life, but proper maintenance is still necessary.
4.1 പരിശോധന ഷെഡ്യൂൾ
- Inspect brake pads and rotors at every tire rotation or at least every 10,000-15,000 miles (16,000-24,000 km).
- Check for adequate pad thickness (typically replace when friction material is 3mm or less).
- Look for uneven wear, cracks, or damage to the pads and rotors.
- Ensure caliper slides are lubricated and move freely.
4.2 മാറ്റിസ്ഥാപിക്കൽ
Replace brake pads when they reach their minimum thickness, or if you experience reduced braking performance, excessive noise, or a spongy brake pedal. Always replace brake pads in sets (both left and right sides on the same axle) to ensure balanced braking.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your braking system after installing these pads, consider the following common problems and potential solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഞരക്കലിന്റെയും / ഞരക്കലിന്റെയും ശബ്ദം | Improper break-in, worn pads, foreign material, caliper issues. | Perform break-in procedure, inspect pads for wear, clean brake components, check caliper function. |
| കുറഞ്ഞ ബ്രേക്കിംഗ് പ്രകടനം | Air in brake lines, worn pads, contaminated pads, faulty master cylinder. | Bleed brake lines, inspect/replace pads, check for fluid leaks, consult technician. |
| Vibration During Braking | വളഞ്ഞ റോട്ടറുകൾ, അസമമായ പാഡ് തേയ്മാനം, അയഞ്ഞ വീൽ ബെയറിംഗുകൾ. | Inspect/replace rotors, check pad wear, have wheel bearings inspected. |
If troubleshooting steps do not resolve the issue, or if you are unsure about any repair, consult a certified automotive technician.
6 സ്പെസിഫിക്കേഷനുകൾ
- ഉൽപ്പന്ന തരം: Ceramic Low Dust Rear Brake Pads
- ബ്രാൻഡ്: ജനറിക്
- മോഡൽ നമ്പറുകൾ: AF88/55FF A123101C 2314, 165210836564_04EE
- മെറ്റീരിയൽ: Ceramic Composite Friction Material
- സ്ഥാനം: പിൻ ആക്സിൽ
- അളവ്: 1 Set (4 pads)
- നിർമ്മാതാവ്: Kingdom Collectibles
- മാതൃരാജ്യം: യുഎസ്എ
7. വാറൻ്റി വിവരങ്ങൾ
Specific warranty details for this product are not provided in the available documentation. For information regarding warranty coverage, terms, and conditions, please contact the seller or the manufacturer, Kingdom Collectibles, directly.
8. പിന്തുണയും സമ്പർക്കവും
For technical assistance, installation questions, or any other support inquiries related to your Ceramic Low Dust Rear Brake Pads, please reach out to the retailer from whom you purchased the product or the manufacturer, Kingdom Collectibles.
Please note: This manual provides general guidance. Always refer to your vehicle's specific service manual for detailed instructions and safety procedures.