പ്രോ-ജെക്റ്റ് അരങ്ങേറ്റം EVO 2 ഓഡിയോഫൈൽ ടേൺടബിൾ

1.1 അൺബോക്സിംഗും ഘടകങ്ങളും

Carefully unpack all items from the box. Ensure all components are present before proceeding with assembly.

• ടേൺ ചെയ്യാവുന്ന യൂണിറ്റ്
• Transparent Dustcover
• കണക്ഷൻ കേബിൾ
• യൂണിവേഴ്സൽ പവർ അഡാപ്റ്റർ
• അലൈൻമെന്റ് പ്രൊട്രാക്ടർ
• സിംഗിൾ അഡാപ്റ്റർ

ഫ്രണ്ട് view of the Pro-Ject Debut EVO 2 turntable.

1.2 പ്ലാറ്ററും ബെൽറ്റും സ്ഥാപിക്കൽ

1. Carefully place the heavy aluminum platter onto the spindle in the center of the turntable.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and around the motor pulley.
3. Rotate the platter manually a few times clockwise to ensure the belt is properly seated.

Image showing the platter with the drive belt correctly installed around the motor pulley.

1.3 Tonearm Assembly

1. Slide the counterweight onto the rear of the tonearm.
2. Attach the pre-mounted Pick it MM EVO cartridge to the tonearm headshell.

വിശദമായി view of the carbon fiber tonearm and the pre-mounted Pick it MM EVO cartridge.

Diagram illustrating the TPE counterweight and premium bearing block for the tonearm.

1.4 Dustcover Installation

Carefully insert the hinges of the transparent dustcover into the corresponding slots on the turntable base.

The Pro-Ject Debut EVO 2 turntable with its transparent dustcover in place.

1.5 Leveling the Turntable

Place the turntable on a stable, level surface. Use a bubble level (not included) to ensure the turntable is perfectly horizontal. Adjust the turntable's feet as necessary to achieve a level position.

1.6 Balancing the Tonearm

This critical step ensures proper tracking force and prevents damage to your records and stylus. Follow the detailed instructions in the included manual for precise tonearm balancing and anti-skating adjustment.

Detail of the tonearm showing the anti-skating mechanism.

1.7 ഒരു ഓഡിയോ സിസ്റ്റത്തിലേക്ക് ബന്ധിപ്പിക്കുന്നു

ടർടേബിൾ നിങ്ങളിലേക്ക് ബന്ധിപ്പിക്കുക amplifier or receiver using the provided connection cable. Ensure your amplifier has a phono input, or use an external phono preamplifier if necessary. Connect the ground wire to the ground terminal on your ampലൈഫയർ/പ്രീamp to minimize hum.

Video: Fluance Reference Turntable First Time Setup. This video provides a general guide for turntable setup, including platter, belt, tonearm, and dust cover installation, as well as leveling and balancing.

Video: How to Connect a Fluance Turntable to a Stereo Amplifier. This video offers a general guide on connecting a turntable to an amplifier, which can be helpful for the Pro-Ject Debut EVO 2.

2.1 പവർ ഓൺ/ഓഫ്, സ്പീഡ് സെലക്ഷൻ

To power on the turntable, rotate the power knob. The Debut EVO 2 features electronic speed selection for 33 and 45 RPM. Use the dedicated button to switch between these speeds. For 78 RPM records, a special stylus and pulley may be required (sold separately).

2.2 ഒരു റെക്കോർഡ് പ്ലേ ചെയ്യുന്നു

1. നിങ്ങളുടെ റെക്കോർഡ് പ്ലേറ്ററിൽ സ്ഥാപിക്കുക.
2. Select the correct playback speed (33 or 45 RPM).
3. ക്യൂയിംഗ് ലിവർ ഉപയോഗിച്ച് ടോൺആം സൌമ്യമായി ഉയർത്തുക.
4. റെക്കോർഡിലെ ആവശ്യമുള്ള ട്രാക്കിന് മുകളിൽ ടോൺആം സ്ഥാപിക്കുക.
5. Slowly lower the cueing lever to allow the stylus to descend onto the record groove.
6. At the end of the record, lift the tonearm using the cueing lever and return it to its rest.

3.1 വൃത്തിയാക്കൽ

• Regularly clean the dustcover and turntable plinth with a soft, dry cloth.
• Use a carbon fiber brush to gently clean your records before each play to remove dust and static.
• Clean the stylus carefully with a dedicated stylus brush, moving from back to front.

3.2 സ്റ്റൈലസ് കെയർ

The stylus is a delicate component. Avoid touching it with your fingers. Replace the stylus when signs of wear appear, typically after 500-1000 hours of playback, to maintain sound quality and prevent record damage.

4.1 ശബ്ദമില്ല

• Check all cable connections between the turntable, preamplifier (if used), and ampലൈഫയർ/സ്വീകർത്താവ്.
• നിങ്ങളുടെ ഇൻപുട്ടിൽ ശരിയായ ഇൻപുട്ട് തിരഞ്ഞെടുത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക ampലൈഫയർ/സ്വീകർത്താവ്.
• Verify the stylus is properly seated in the cartridge and the tonearm is balanced.

4.2 Skipping or Distortion

• ടേൺടേബിൾ സ്ഥിരതയുള്ളതും നിരപ്പായതുമായ പ്രതലത്തിലാണെന്ന് ഉറപ്പാക്കുക.
• Re-check tonearm balance and anti-skating settings.
• Clean the record and stylus.
• Inspect the stylus for damage or wear.

4.3 മൂളൽ ശബ്ദം

• Ensure the ground wire is securely connected between the turntable and your ampലൈഫയർ/പ്രീamp.
• Check for any loose connections in the audio cables.
• Move the turntable away from other electronic devices that might cause interference.

6.1 സ്പെയർ പാർട്സ് ലഭ്യത

Pro-Ject offers a 25-year spare parts availability guarantee for this turntable, ensuring its longevity and continued performance.

6.2 ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Pro-Ject Audio Systems webസൈറ്റ്.