58979
CEN-TECH 630 കൊടുമുടി Amp Portable Jump Starter and Power Pack
മോഡൽ: 58979
ആമുഖം
This manual provides important information for the safe operation, maintenance, and troubleshooting of your CEN-TECH 630 Peak Amp Portable Jump Starter and Power Pack. Please read this manual thoroughly before using the product and retain it for future reference.
The CEN-TECH Portable Jump Starter is a versatile device designed to provide 630 peak amps for jump-starting vehicles, a 12V DC power supply, and a bright LED work light. It also features a 10W USB power output for charging personal electronic devices. Built-in safety features protect against reverse polarity, short circuits, low-voltage, overcharging, and over-discharging. The unit includes an easy-to-understand interface with colored LED indicators for battery status and fault detection, powered by a reliable 12V UL-listed sealed lead-acid battery.

Figure 1: CEN-TECH 630 Peak Amp Portable Jump Starter and Power Pack.
സുരക്ഷാ വിവരങ്ങൾ
യൂണിറ്റിന് പരിക്കുകളോ കേടുപാടുകളോ ഉണ്ടാകാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:
- ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക.
- മഴയിലോ നനഞ്ഞ അവസ്ഥയിലോ യൂണിറ്റ് തുറന്നുകാട്ടരുത്.
- Do not operate the unit if it has received a sharp blow, been dropped, or otherwise damaged.
- ഉപയോഗിക്കുമ്പോഴും ചാർജ് ചെയ്യുമ്പോഴും ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- ബാറ്ററികളിൽ പ്രവർത്തിക്കുമ്പോൾ കണ്ണിന് സംരക്ഷണം ധരിക്കുക.
- ഔട്ട്പുട്ട് ടെർമിനലുകൾ ഷോർട്ട് സർക്യൂട്ട് ചെയ്യരുത്.
- എപ്പോഴും പോസിറ്റീവ് (+) cl ബന്ധിപ്പിക്കുകamp to the positive (+) battery terminal first, then the negative (-) clamp to a non-moving metal part of the vehicle chassis away from the battery.
- Disconnect in reverse order: negative (-) first, then positive (+).
- ശീതീകരിച്ച ബാറ്ററി ചാടാൻ ശ്രമിക്കരുത്.
- Do not use this unit as a battery charger for vehicle batteries.
- This unit contains a sealed lead-acid battery. Recycle properly.
പാക്കേജ് ഉള്ളടക്കം
എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- CEN-TECH 630 കൊടുമുടി Amp Portable Jump Starter and Power Pack
- എസി അഡാപ്റ്റർ
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
സജ്ജീകരണവും പ്രാരംഭ ചാർജിംഗും
Before first use, fully charge the unit for at least 24 hours. This conditions the battery and ensures maximum performance.
- Locate the charging port on the unit.
- Connect the supplied AC adapter to the charging port.
- എസി അഡാപ്റ്റർ ഒരു സ്റ്റാൻഡേർഡ് 120V എസി വാൾ ഔട്ട്ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്യുക.
- The charging indicator light will illuminate. Allow the unit to charge until the "Fully Charged" indicator illuminates, or for a minimum of 24 hours for the initial charge.
- പൂർണ്ണമായി ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ, എസി അഡാപ്റ്റർ വിച്ഛേദിക്കുക.
It is recommended to recharge the unit every 3 months when not in use to maintain battery health and readiness.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ഒരു വാഹനം സ്റ്റാർട്ട് ചെയ്തുകൊണ്ട് ചാടുക
Ensure the vehicle's ignition is off and all accessories (lights, radio, etc.) are turned off. Ensure the jump starter is fully charged.
- ബന്ധിപ്പിക്കുക ചുവപ്പ് പോസിറ്റീവ് (+) clamp വാഹന ബാറ്ററിയുടെ പോസിറ്റീവ് (+) ടെർമിനലിലേക്ക്.
- ബന്ധിപ്പിക്കുക കറുപ്പ് നെഗറ്റീവ് (-) clamp ബാറ്ററിയിൽ നിന്നും ഇന്ധന ലൈനുകളിൽ നിന്നും അകലെ, വാഹനത്തിന്റെ ചേസിസിന്റെ ചലിക്കാത്ത ഒരു ലോഹ ഭാഗത്തേക്ക്.
- രണ്ടും cl ഉറപ്പാക്കുകamps have a solid connection.
- Turn the jump starter's power switch to the "ON" position.
- Attempt to start the vehicle. If the vehicle does not start after 5-6 seconds, wait at least 3 minutes before attempting again to allow the jump starter to cool.
- Once the vehicle starts, immediately turn the jump starter's power switch to the "OFF" position.
- വിച്ഛേദിക്കുക കറുപ്പ് നെഗറ്റീവ് (-) clamp ആദ്യം, പിന്നെ വിച്ഛേദിക്കുക ചുവപ്പ് പോസിറ്റീവ് (+) clamp.
- ജമ്പ് സ്റ്റാർട്ടർ ഉപയോഗിച്ചതിന് ശേഷം എത്രയും വേഗം റീചാർജ് ചെയ്യുക.
പ്രധാനപ്പെട്ടത്: Do not crank the engine for more than 6 seconds at a time. Allow the jump starter to cool for at least 3 minutes between attempts.
Using the 12V DC Power Outlets
The unit features two 12V DC outlets for powering compatible 12V accessories (e.g., portable air compressors, car vacuums). The total output for both outlets is 12V DC.
- Ensure the jump starter is in the "ON" position.
- Plug your 12V DC accessory into one of the 12V DC outlets.
- Operate your accessory as per its own instructions.
- When finished, disconnect the accessory and turn the jump starter to the "OFF" position.
കുറിപ്പ്: Continuous use of the 12V DC outlets will drain the internal battery. Monitor the battery status indicator.
യുഎസ്ബി ചാർജിംഗ് പോർട്ട് ഉപയോഗിക്കുന്നു
The 2.1A USB charging port provides power for charging smartphones, tablets, and other USB-powered devices.
- Ensure the jump starter is in the "ON" position.
- Connect your USB device to the USB port using a compatible USB cable.
- നിങ്ങളുടെ ഉപകരണം ചാർജ് ചെയ്യാൻ തുടങ്ങണം.
- When finished, disconnect your device and turn the jump starter to the "OFF" position.
വർക്ക് ലൈറ്റ് ഉപയോഗിക്കുന്നു
The built-in 3 LED work light provides illumination in low-light conditions.
- Locate the work light switch/button on the unit.
- Press the switch/button to turn the light ON.
- Press again to turn the light OFF.
പരിപാലനവും സംഭരണവും
ശരിയായ അറ്റകുറ്റപ്പണി നിങ്ങളുടെ ജമ്പ് സ്റ്റാർട്ടറിന്റെ ദീർഘായുസ്സും പ്രകടനവും ഉറപ്പാക്കുന്നു.
- പതിവായി റീചാർജ് ചെയ്യുക: Recharge the unit every 3 months, even if not used, to maintain the internal battery's charge and extend its lifespan.
- വൃത്തിയാക്കൽ: ഉണങ്ങിയതും മൃദുവായതുമായ തുണി ഉപയോഗിച്ച് യൂണിറ്റ് വൃത്തിയാക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- Clamp പരിചരണം: ബാറ്ററി cl ആയി സൂക്ഷിക്കുകampവൃത്തിയുള്ളതും തുരുമ്പെടുക്കാത്തതുമാണ്.
- സംഭരണം: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the power switch is in the "OFF" position during storage.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: The internal sealed lead-acid battery is not user-replaceable. Contact qualified service personnel for battery replacement.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| യൂണിറ്റ് ഓണാക്കുകയോ ചാർജ് ചെയ്യുകയോ ചെയ്യുന്നില്ല. | Internal battery is completely discharged or faulty. AC adapter is not connected properly or is faulty. | Ensure AC adapter is securely connected and plugged into a live outlet. Allow unit to charge for at least 24 hours. If problem persists, contact customer support. |
| ചാടാൻ ശ്രമിച്ചതിന് ശേഷം വാഹനം സ്റ്റാർട്ട് ആകുന്നില്ല. | Jump starter battery is low. Clamps are not making good contact. Vehicle battery is severely discharged or faulty. | Recharge the jump starter. Ensure clamps are clean and securely connected to the correct terminals. Check vehicle battery condition. Wait 3 minutes between attempts. |
| USB port or 12V DC outlets not working. | Jump starter is not turned "ON". Internal battery is low. Device/accessory is not compatible or faulty. | Ensure the jump starter is "ON". Recharge the unit. Test with a different device/accessory. |
| Overcharge/Over-discharge protection activated. | Unit has been charged too long or discharged too deeply. | The unit's internal protection system has activated. Disconnect from power source or load. Allow unit to rest, then attempt to recharge or use normally. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 58979 |
| കൊടുമുടി Amps | 630 Amps |
| ക്രാങ്കിംഗ് Amps | 330 Amps |
| ആന്തരിക ബാറ്ററി | 12V, 17 Ah Sealed Lead-Acid |
| ഡിസി പവർ ഔട്ട്ലെറ്റുകൾ | Two 12V DC outlets |
| USB ഔട്ട്പുട്ട് | 2.1A (10W) |
| വർക്ക് ലൈറ്റ് | Built-in 3 LED |
| ബൂസ്റ്റർ കേബിളുകൾ | Heavy Duty 7 AWG with Copper Coated Steel Clamps |
| ഭാരം | 15.9 പൗണ്ട് |
| സുരക്ഷാ മാനദണ്ഡം | UL ലിസ്റ്റുചെയ്തു |
വാറൻ്റിയും ഉപഭോക്തൃ പിന്തുണയും
For warranty information or technical assistance, please refer to the manufacturer's official webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
നിർമ്മാതാവ്: HFT
മോഡൽ നമ്പർ: 58979
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.