പൂൾ ക്യൂ മെയിന്റനൻസ് ഓയിൽ യൂസർ മാനുവൽ

ആമുഖം

This manual provides instructions for the proper use and maintenance of the Generic Pool Cue Maintenance Oil. This high-quality lubricating oil is designed to extend the service life of your pool cue by reducing friction and wear, penetrating deep into the rod to remove dirt and stains, and adding a professional glossy sheen.

Image: The Generic Pool Cue Maintenance Oil in a 20ml spray bottle.

സജ്ജമാക്കുക

Before applying the Pool Cue Maintenance Oil, ensure your pool cue is clean and free from loose debris. A clean surface allows for optimal penetration and effectiveness of the oil.

• Inspect the cue shaft for any visible dirt or grime.
• If necessary, gently wipe the cue with a dry, lint-free cloth to remove surface dust.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for effective application of the Pool Cue Maintenance Oil:

1. Step 1: Initial Cleaning and Application

   First, use a cleaning sponge or soft cloth to clean the cue. Then, use a soft cloth to spread the oil evenly. Apply a small amount to the nose (tip) of the cue.

   

   Image: A hand holding the oil bottle and spraying it onto a pool cue, with a cleaning cloth nearby, illustrating the initial application step.

2. Step 2: Wiping and Drying

   Use a clean towel to wipe the back and front of the cue until it feels smooth. After the oil is completely absorbed, place the cue in a well-ventilated area to dry for a few hours. Ensure the cue is dry before storage or next use.

   

   Image: A hand wiping a pool cue with a cloth, demonstrating the wiping and drying process after oil application.
3. General Application Tip

   The oil can be sprayed directly onto the cue shaft. Its small size (20ml bottle) makes it convenient for use anytime, anywhere, providing comprehensive maintenance for your cue stick.

   

   Image: A hand spraying the maintenance oil directly onto a pool cue shaft, highlighting ease of application.

Maintenance Benefits

Regular application of this oil provides several benefits for your pool cue:

• Extended Longevity: Reduces friction and wear, extending the lifespan of your cue.
• Wood Protection Boost: Penetrates deep to moisturize and toughen the wood, significantly reducing the risk of cracking and damage.
• Cleaning Effect: Enhances the brightness and smoothness of your pool cues by effectively removing dirt and stains, keeping the rod clean.
• Improved Playability: A smooth and well-maintained cue allows for better control and a more consistent stroke.

Image: A visual comparison showing a cue shaft before and after treatment with the maintenance oil, highlighting improved appearance.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues, consider the following:

• Cue remains dull or sticky after application: Ensure the cue was thoroughly cleaned before application. Apply a thin, even layer of oil and wipe off any excess. Allow sufficient drying time in a well-ventilated area.
• Oil does not seem to absorb: The cue surface might have existing residues. Ensure the cue is clean and dry. Apply a smaller amount of oil.
• Product leakage: Ensure the cap is securely tightened after each use. Store upright in a cool, dry place.

സ്പെസിഫിക്കേഷനുകൾ

സുരക്ഷാ വിവരങ്ങൾ

ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

• കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• കണ്ണുകളുമായുള്ള സമ്പർക്കം ഒഴിവാക്കുക. സമ്പർക്കമുണ്ടായാൽ, വെള്ളം ഉപയോഗിച്ച് നന്നായി കഴുകുക.
• വിഴുങ്ങരുത്. വിഴുങ്ങിയാൽ ഉടൻ വൈദ്യസഹായം തേടുക.
• നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത് ഉപയോഗിക്കുക.
• നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും താപ സ്രോതസ്സുകളിൽ നിന്നും അകലെ തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.