MDCMDCM Solar Lights Outdoor Waterproof Motion Sensor User Manual

1. ആമുഖം

Thank you for choosing the MDCMDCM Solar Lights Outdoor Waterproof Motion Sensor. This manual provides essential information for the proper installation, operation, and maintenance of your solar lights. Please read it thoroughly before use and retain it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻസ്റ്റലേഷൻ: Ensure the mounting surface is stable and can support the weight of the light. Avoid installing near flammable materials or in areas prone to extreme heat.
• സോളാർ പാനൽ സ്ഥാപിക്കൽ: For optimal charging, install the solar panel in a location that receives direct sunlight for at least 6-8 hours daily. Shaded areas will reduce charging efficiency and light duration.
• ജല പ്രതിരോധം: The product is IP65 waterproof, suitable for outdoor use. However, avoid submerging the unit in water.
• ബാറ്ററി: The integrated battery is not user-replaceable. Do not attempt to open the unit or replace the battery.
• പ്രകാശ സ്രോതസ്സ്: Do not stare directly into the LED lights when they are active, as this may cause eye strain.
• കുട്ടികൾ: ഉൽപ്പന്നവും അതിന്റെ ഘടകങ്ങളും കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• MDCMDCM Solar Motion Sensor Light (2 units)
• Remote Control (2 units)
• മൗണ്ടിംഗ് സ്ക്രൂകളും വാൾ പ്ലഗുകളും (8 സെറ്റുകൾ)
• ഉപയോക്തൃ മാനുവൽ (1 യൂണിറ്റ്)

Figure 3.1: Package Contents and Installation Diagram

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The MDCMDCM Solar Light features a multi-head design for wide illumination and a built-in PIR motion sensor. The solar panel charges the internal battery during the day, and the light activates automatically at night based on selected modes.

Figure 4.1: Adjustable Light Heads and Solar Panel

The five light heads are independently adjustable, allowing for a 360-degree illumination angle to cover specific areas as needed.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ശരിയായ ഇൻസ്റ്റാളേഷനായി ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select an outdoor location where the solar panel can receive maximum direct sunlight throughout the day. Avoid areas under eaves, trees, or other obstructions that may block sunlight. A recommended installation height is approximately 6.5 feet (2 meters).
2. ഡ്രിൽ ഹോളുകൾ അടയാളപ്പെടുത്തുക: Hold the light's mounting base against the desired surface and mark the positions for the mounting screws.
3. തുളകൾ: Use an appropriate drill bit to drill holes at the marked positions. Insert the wall plugs into the drilled holes.
4. വെളിച്ചം മൌണ്ട് ചെയ്യുക: Align the light's mounting base with the holes and secure it using the provided screws.
5. ലൈറ്റ് ഹെഡ്‌സ് ക്രമീകരിക്കുക: Once mounted, adjust the five light heads to direct illumination to your desired areas. The heads can be rotated up, down, left, and right.
6. പ്രാരംഭ ചാർജ്: Allow the solar light to charge for at least 6-8 hours in direct sunlight before its first use to ensure optimal battery performance.

Figure 5.1: Motion Sensor Detection Range and Coverage

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The solar light is controlled by the included remote control. Ensure the remote has a clear line of sight to the light for effective operation.

6.1. വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

Figure 6.1: Brightness Levels and Lighting Modes

• ഓൺ/ഓഫ് ബട്ടൺ: ലൈറ്റ് ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
• Brightness Adjustment (A/B buttons): Adjusts the light output to 30% (1000 Lumens), 60% (2000 Lumens), or 100% (3000 Lumens).
• മോഡ് 1 (സെൻസർ മോഡ്): The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness for approximately 30 seconds, then turns off.
• Mode 2 (Dim Continuous On All Night): The light stays on at a continuous dim brightness throughout the night, regardless of motion.
• മോഡ് 3 (ഡിം + സെൻസർ മോഡ്): The light stays on at a continuous dim brightness throughout the night. When motion is detected, it brightens to 100% for approximately 30 seconds, then returns to dim brightness.

6.2. വീഡിയോ പ്രദർശനം

Video 6.1: MDCMDCM Solar Motion Lights Outdoor User Package - This video demonstrates the unboxing and basic features of the MDCMDCM solar motion lights, including their adjustable heads and remote control functionality.

7. ചാർജിംഗ്

The MDCMDCM Solar Light is equipped with a high-efficiency solar panel. During daylight hours, the solar panel converts sunlight into electrical energy, which is stored in the internal 2400mAh battery. The light automatically detects ambient light levels and will only operate in its selected mode when it is dark enough. Ensure the solar panel is clean and free from obstructions for optimal charging performance.

8. പരിപാലനം

• വൃത്തിയാക്കൽ: Regularly wipe the solar panel and light heads with a soft, damp പൊടി, അഴുക്ക് അല്ലെങ്കിൽ അവശിഷ്ടങ്ങൾ നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. വൃത്തിയുള്ള സോളാർ പാനൽ കാര്യക്ഷമമായ ചാർജിംഗ് ഉറപ്പാക്കുന്നു.
• പരിശോധന: Periodically check the mounting screws to ensure the light remains securely attached.
• പാരിസ്ഥിതിക ഘടകങ്ങൾ: In areas with heavy snow or ice, ensure the solar panel is cleared to allow for charging.

9. പ്രശ്‌നപരിഹാരം

If you encounter issues with your solar light, refer to the following table for common problems and solutions:

10 സ്പെസിഫിക്കേഷനുകൾ

11. വാറൻ്റിയും പിന്തുണയും

MDCMDCM offers a lifetime warranty for this product, ensuring its quality and performance. If you experience any issues or require assistance, please contact MDCMDCM customer support through the retailer's platform or the contact information provided with your purchase. Please retain your proof of purchase for warranty claims.