B0DLHV68DS
Universal TV Wall Mount Instruction Manual
Model: B0DLHV68DS
1. ആമുഖം
This manual provides detailed instructions for the safe and proper installation and use of your new Universal TV Wall Mount. Designed for simplicity and strength, this wall mount is ideal for creating a clean and modern look in your home or office. Please read this manual thoroughly before installation and keep it for future reference.

ചിത്രം 1: ഓവർview of the Universal TV Wall Mount. This image shows the black metal frame of the wall mount, featuring horizontal and vertical bars with multiple mounting holes for various TV sizes and wall stud configurations.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: Improper installation may result in serious personal injury or damage to property. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- പരമാവധി ഭാര ശേഷി 1000 കിലോഗ്രാം (2200 പൗണ്ട്) കവിയരുത്.
- മൗണ്ടിന്റെയും ടിവിയുടെയും സംയുക്ത ഭാരം ഭിത്തിയുടെ ഘടന സുരക്ഷിതമായി താങ്ങാൻ കഴിയുമെന്ന് ഉറപ്പാക്കുക.
- Always use a stud finder to locate wall studs for secure mounting.
- Wear appropriate safety gear, including eye protection, during installation.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
3. പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക. ഏതെങ്കിലും ഭാഗങ്ങൾ നഷ്ടപ്പെട്ടാലോ കേടുപാടുകൾ സംഭവിച്ചാലോ, ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ട് പോകരുത്, ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
- TV Wall Mount Bracket (Main Frame)
- മൗണ്ടിംഗ് ഹാർഡ്വെയർ കിറ്റ് (സ്ക്രൂകൾ, ആങ്കറുകൾ, വാഷറുകൾ, സ്പെയ്സറുകൾ)
- സംയോജിത ബബിൾ ലെവൽ
- വിശദമായ ഇൻസ്റ്റലേഷൻ ഗൈഡ്
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps carefully for a secure installation. It is recommended to have two people for TV mounting.
- മതിൽ തയ്യാറാക്കുക: Use a stud finder to locate and mark the center of two adjacent wall studs. Ensure the chosen location is at the desired viewing ഉയരം.
- ഡ്രില്ലിംഗ് പോയിന്റുകൾ അടയാളപ്പെടുത്തുക: Hold the wall mount bracket against the wall, aligning it with the marked studs. Use the integrated bubble level to ensure it is perfectly horizontal. Mark the drilling points through the mounting holes.
- ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Drill pilot holes at the marked points. The drill bit size will depend on your wall type and the provided anchors/screws. Refer to the detailed installation guide for specific drill bit recommendations.
- വാൾ പ്ലേറ്റ് ഘടിപ്പിക്കുക: Secure the wall mount bracket to the wall using the provided lag bolts and washers. Tighten all bolts firmly, but do not overtighten.
- ടിവി ബ്രാക്കറ്റുകൾ ഘടിപ്പിക്കുക: Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
- മൌണ്ട് ടിവി: Carefully lift the television and hook the TV brackets onto the wall mount plate. Ensure both sides are properly seated.
- സുരക്ഷിത ടിവി: Engage the safety locks on the bottom of the TV brackets to prevent accidental detachment. This typically involves tightening screws or engaging a locking mechanism.
5. മൗണ്ട് പ്രവർത്തിപ്പിക്കൽ
This is a fixed wall mount designed to hold your TV securely in a stationary position. Once installed, no further adjustments are typically required for viewing angle. The mount holds your TV approximately 1.2 inches (3 cm) from the wall, creating a sleek, modern profile.
To remove the TV from the mount, disengage the safety locks and carefully lift the TV off the wall plate. Always perform this with assistance to prevent damage or injury.
6. പരിപാലനം
- എല്ലാ സ്ക്രൂകളും ബോൾട്ടുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
- മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് മൗണ്ട് വൃത്തിയാക്കുക. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- Inspect the mount for any signs of wear or damage. If damage is found, do not use the mount and replace it immediately.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ടിവി നിലവാരമില്ലാത്തതാണ് | ഇൻസ്റ്റാളേഷൻ സമയത്ത് വാൾ പ്ലേറ്റ് നിരപ്പായിട്ടില്ല. | Remove TV, loosen wall plate screws, adjust with bubble level, re-tighten. |
| Mount feels loose on wall | Screws not fully tightened or improper wall anchors used. | Ensure all lag bolts are securely tightened into wall studs. If using anchors, verify they are appropriate for your wall type. |
| TV does not fit mount | തെറ്റായ VESA പാറ്റേൺ അല്ലെങ്കിൽ ടിവി വലുപ്പം. | Verify your TV's VESA pattern matches the mount's compatibility. This mount is designed for specific TV types (e.g., Sharp FI3322E40, LC-40FI3322E). |
8 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ജനറിക്
- മോഡൽ: B0DLHV68DS
- മൗണ്ട് തരം: മതിൽ മൗണ്ട്
- ചലന തരം: പരിഹരിച്ചു
- മെറ്റീരിയൽ: High-quality, heavy-duty steel
- പരമാവധി ഭാരം ശേഷി: 1000 കിലോഗ്രാം വരെ (2200 പ bs ണ്ട്)
- മതിലിൽ നിന്നുള്ള ദൂരം: ഏകദേശം 1.2 ഇഞ്ച് (3 സെ.മീ)
- ആദ്യം ലഭ്യമായ തീയതി: ഒക്ടോബർ 30, 2024
9. വാറൻ്റിയും പിന്തുണയും
ഈ ഉൽപ്പന്നം എ രണ്ട് വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ, നിർമ്മാണ വൈകല്യങ്ങൾ ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
For technical support, missing parts, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to your purchase documentation for contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.