Povasee A6

Povasee 5000A Jump Starter with Air Compressor (Model A6) - Instruction Manual

സുരക്ഷിതവും ഫലപ്രദവുമായ പ്രവർത്തനത്തിനായുള്ള നിങ്ങളുടെ സമഗ്രമായ ഗൈഡ്.

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Povasee 5000A Jump Starter with Air Compressor, Model A6, is a versatile multi-functional device designed for automotive emergencies and convenience. It integrates six essential features: a powerful jump starter, a tire inflator, a flashlight with SOS signaling, a power bank, and a tire pressure gauge. This device is engineered to provide reliable assistance for a wide range of vehicles and situations.

Povasee Jump Starter with Air Compressor and accessories

Image 1: Povasee Jump Starter with Air Compressor and various accessories.

This image displays the Povasee Jump Starter unit alongside its included accessories, such as jumper cables, air hose, and charging cables, all neatly arranged to showcase its comprehensive functionality.

2 സുരക്ഷാ വിവരങ്ങൾ

ഈ ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ സുരക്ഷാ മുന്നറിയിപ്പുകളും നിർദ്ദേശങ്ങളും വായിക്കുക. മുന്നറിയിപ്പുകളും നിർദ്ദേശങ്ങളും പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് വൈദ്യുതാഘാതം, തീപിടുത്തം, കൂടാതെ/അല്ലെങ്കിൽ ഗുരുതരമായ പരിക്കുകൾക്ക് കാരണമായേക്കാം.

  • എപ്പോഴും ചുവന്ന cl കണക്ട് ചെയ്യുകamp പോസിറ്റീവ് (+) ടെർമിനലിലേക്കും കറുത്ത clamp നെഗറ്റീവ് (-) ടെർമിനലിലേക്ക്.
  • ചുവപ്പും കറുപ്പും cl തൊടരുത്amps together to prevent short circuits.
  • ഉപയോഗിക്കുന്നതിന് മുമ്പ് ജമ്പ് സ്റ്റാർട്ടർ പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • മഴയെ അല്ലെങ്കിൽ നനഞ്ഞ അവസ്ഥയിലേക്ക് ഉൽപ്പന്നത്തെ തുറന്നുകാട്ടരുത്.
  • യൂണിറ്റ് ഡിസ്അസംബ്ലിംഗ് ചെയ്യരുത്. യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥരെ സർവീസ് ചെയ്യാൻ റഫർ ചെയ്യുക.
  • Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
Diagram illustrating 10 safety features of the Povasee Jump Starter

Image 2: Visual representation of the 10 intelligent secure protection features.

This image highlights the advanced safety mechanisms built into the Povasee A6, including over-current, short-circuit, over-voltage, over-charge, over-discharge, reverse-polarity, spark-resistance, over-heat, reverse-connection, and extreme-temperature protection.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജ് തുറക്കുമ്പോൾ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Povasee 5000A Jump Starter with Air Compressor (Model A6)
  • സ്മാർട്ട് ജമ്പർ കേബിളുകൾ
  • Air Hose with 4 Nozzles
  • USB-C ചാർജിംഗ് കേബിൾ
  • ഉപയോക്തൃ മാനുവൽ
  • സ്റ്റോറേജ് കേസ്
All components of the Povasee Jump Starter kit laid out

Image 3: All components of the Povasee Jump Starter kit, including the main unit, smart jumper cables, air hose with various nozzles, USB-C charging cable, user manual, and a durable storage case.

ഈ ചിത്രം വ്യക്തമായ ഒരു ആശയം നൽകുന്നു view of everything included in the product package, ensuring users can confirm they have all necessary parts.

4. ഉൽപ്പന്ന സവിശേഷതകളും ഘടകങ്ങളും

The Povasee A6 is designed for ease of use and maximum utility. Key components include:

  • പ്രധാന യൂണിറ്റ്: Features a digital display for battery percentage and working status, power button, and various ports.
  • ജമ്പ് സ്റ്റാർട്ട് പോർട്ട്: Dedicated port for connecting smart jumper cables.
  • USB-A & USB-C പോർട്ടുകൾ: ബാഹ്യ ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നതിന് (പവർ ബാങ്ക് പ്രവർത്തനം).
  • ഡിസി put ട്ട്‌പുട്ട്: 12V/10A output for powering 12V vehicle accessories.
  • LED ഫ്ലാഷ്‌ലൈറ്റ്: Integrated 800-lumen flashlight with SOS and strobe modes.
  • എയർ കംപ്രസ്സർ: Built-in 150 PSI air compressor with smart preset and auto-stop function.
വിശദമായി view of Povasee Jump Starter features including ports, LED light, and digital display

ചിത്രം 4: ക്ലോസ്-അപ്പ് view of the jump starter's various ports, digital display, and LED flashlight.

This image provides a detailed look at the device's interface, highlighting the USB-IN, Type-C OUT, DC output, and the 800-lumen LED light, along with the digital display showing battery status.

5. സജ്ജീകരണവും ചാർജിംഗും

5.1 ജമ്പ് സ്റ്റാർട്ടർ ചാർജ് ചെയ്യുന്നു

Before first use, fully charge the Povasee A6. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

  1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
  2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included).
  3. The digital display will show the charging progress. The unit is fully charged when the display shows 100%.

5.2 ബാറ്ററി നില പരിശോധിക്കുന്നു

Press the power button once to check the current battery level on the digital display.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 ഒരു വാഹനം ആരംഭിക്കുമ്പോൾ ചാടുക

The Povasee A6 can jump start 12V vehicles with up to 9L gas or 8L diesel engines.

  1. ജമ്പ് സ്റ്റാർട്ടർ കുറഞ്ഞത് 50% ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  2. Insert the smart jumper cable plug firmly into the jump start port on the unit.
  3. ചുവപ്പ് (+) cl കണക്റ്റുചെയ്യുകamp വാഹന ബാറ്ററിയുടെ പോസിറ്റീവ് (+) ടെർമിനലിലേക്ക്.
  4. കറുപ്പ് (-) cl കണക്റ്റുചെയ്യുകamp വാഹന ബാറ്ററിയുടെ നെഗറ്റീവ് (-) ടെർമിനലിലേക്ക്.
  5. Once connected, the indicator light on the smart clamp will turn green, indicating it's ready to jump start. If the light is red or flashing, check connections or refer to troubleshooting.
  6. വാഹനത്തിന്റെ എഞ്ചിൻ സ്റ്റാർട്ട് ചെയ്യുക.
  7. Once the engine starts, immediately remove the smart jumper cables from the vehicle battery within 30 seconds, then disconnect from the jump starter.
  8. If the vehicle does not start on the first attempt, wait at least 1 minute before trying again. If the battery voltage is extremely low (below 9V), press the "RST" button on the smart clamp to activate boost mode, then attempt to start the engine.
Step-by-step guide on how to jump start a car using the Povasee Jump Starter

Image 5: Visual instructions for connecting the jump starter to a car battery and starting the vehicle.

This image illustrates the four key steps for jump starting a car: inserting the plug, clamping to the battery terminals (red to positive, black to negative), starting the vehicle, and removing the jumper cables.

6.2 എയർ കംപ്രസ്സർ ഉപയോഗിക്കുന്നു

The built-in air compressor can inflate tires up to 150 PSI and features an auto-stop function.

  1. Short press the power switch to turn on the unit.
  2. ടയർ വാൽവ് സ്റ്റെമിലേക്ക് എയർ ഹോസ് ബന്ധിപ്പിക്കുക.
  3. Use the "M" button to select the desired unit (PSI, KPA, BAR) and the "+" / "-" buttons to set the target pressure.
  4. Press the air compressor switch to begin inflation. The compressor will automatically stop once the preset pressure is reached.
  5. For different inflatables (balls, bicycles, motorcycles, cars), use the appropriate nozzle adapter.
Povasee Jump Starter used as an emergency car tire air pump

Image 6: The Povasee Jump Starter actively inflating a car tire, demonstrating its air pump functionality.

This image shows the jump starter connected to a car tire, with the digital display indicating the tire pressure, highlighting its use as an emergency air pump.

6.3 Using the Power Bank and Flashlight

The unit can also serve as a power bank and an emergency flashlight.

  • ശക്തി സംഭരണി: Connect your USB-powered devices to the USB-A or USB-C output ports to charge them.
  • ഫ്ലാഷ്ലൈറ്റ്: Press and hold the power button for 3 seconds to turn on the 800-lumen LED flashlight. Press again for strobe mode, and a third time for SOS signaling. Press and hold again to turn off.
Povasee Jump Starter used as an 800 lumen emergency torch with SOS and strobe functions

Image 7: The jump starter's LED light illuminated, showcasing its emergency torch capabilities with SOS and strobe functions.

This image demonstrates the powerful 800-lumen LED flashlight feature, highlighting its utility for nighttime emergencies or as a general light source, with options for SOS and strobe signaling.

7. പരിപാലനം

  • നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും തീവ്രമായ താപനിലയിൽ നിന്നും മാറി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് യൂണിറ്റ് സൂക്ഷിക്കുക.
  • Recharge the unit every 3-6 months to prolong battery life.
  • മൃദുവായ പുറംഭാഗം വൃത്തിയാക്കുക, ഡിamp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉപയോഗിക്കരുത്.
  • ഓരോ ഉപയോഗത്തിനും മുമ്പ് ജമ്പർ കേബിളുകളും എയർ ഹോസും ഏതെങ്കിലും കേടുപാടുകൾക്കായി പരിശോധിക്കുക.

8. പ്രശ്‌നപരിഹാരം

  • യൂണിറ്റ് ഓണാക്കുന്നില്ല: യൂണിറ്റ് ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • വാഹനം സ്റ്റാർട്ട് ആകുന്നില്ല: Check that jumper cables are correctly connected (red to positive, black to negative). Ensure the smart clamp indicator is green. If battery is extremely low, use boost mode.
  • എയർ കംപ്രസ്സർ പ്രവർത്തിക്കുന്നില്ല: Check that the air hose is securely connected and the unit is powered on. Ensure the desired pressure is set.
  • പവർ ബാങ്കിൽ നിന്ന് ഉപകരണം ചാർജ് ചെയ്യുന്നില്ല: Ensure the device is compatible with USB charging and the cable is properly connected.

9 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർ സ്പെസിഫിക്കേഷൻ
ബ്രാൻഡ് പോവസീ
മോഡൽ A6
പീക്ക് ഔട്ട്പുട്ട് കറന്റ് 5000 Amps
വാല്യംtage 12 വോൾട്ട്
എഞ്ചിൻ അനുയോജ്യത 9 ലിറ്റർ ഗ്യാസ് / 8 ലിറ്റർ ഡീസൽ വരെ
എയർ കംപ്രസ്സർ മർദ്ദം 150 പി.എസ്.ഐ
ബാറ്ററി തരം ലിഥിയം പോളിമർ
ഉൽപ്പന്ന അളവുകൾ 1.9"D x 4.2"W x 7.7"H
ഇനത്തിൻ്റെ ഭാരം 1.5 പൗണ്ട്
Flashlight Lumen 800 ല്യൂമെൻസ്

10. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or customer service inquiries, please refer to the contact details provided in your product packaging or visit the official Povasee webസൈറ്റ്. വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.