ഉൽപ്പന്നം കഴിഞ്ഞുview
This manual provides essential information for the installation, operation, and maintenance of the Generic Honda CB190R Motorcycle Rear Wheel. This component is designed for specific Honda CB190R models manufactured between 2020 and 2024, with part number 42650-k70-630ZA. It is crucial to ensure compatibility with your motorcycle model year before proceeding with installation.
Figure 1: Orange Honda CB190R Motorcycle Rear Wheel. This image displays the complete rear wheel assembly, highlighting its orange finish and spoke design, ready for installation.
സുരക്ഷാ വിവരങ്ങൾ
Always prioritize safety when working with motorcycle components. Read all instructions thoroughly before beginning any procedure. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves. If you are unsure about any step, consult a qualified motorcycle mechanic.
- Ensure the motorcycle is stable and securely supported before removing or installing the wheel.
- Use only appropriate tools for all procedures.
- Do not overtighten or undertighten fasteners; refer to torque specifications.
- കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും ജോലിസ്ഥലത്ത് നിന്ന് അകറ്റി നിർത്തുക.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is critical for safe operation. This section outlines the general steps for replacing the rear wheel. Refer to your motorcycle's official service manual for specific torque values and detailed procedures.
ആവശ്യമായ ഉപകരണങ്ങൾ:
- മോട്ടോർസൈക്കിൾ സ്റ്റാൻഡ് അല്ലെങ്കിൽ ലിഫ്റ്റ്
- സോക്കറ്റ് റെഞ്ച് സെറ്റ്
- ടോർക്ക് റെഞ്ച്
- Axle nut wrench
- Chain adjustment tools (if applicable)
- ഗ്രീസ്
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- മോട്ടോർസൈക്കിൾ തയ്യാറാക്കുക: Place the motorcycle on a stable stand, ensuring the rear wheel is off the ground.
- പഴയ വീൽ നീക്കം ചെയ്യുക:
- Loosen the axle nut.
- Remove any chain adjusters or brake caliper mounts as necessary.
- Slide the axle out.
- Carefully remove the old wheel, noting the position of spacers and chain.
- ഘടകങ്ങൾ പരിശോധിക്കുക: Before installing the new wheel, inspect the brake rotor, sprocket, and wheel bearings for any damage or wear. Replace components as needed.
- പുതിയ വീൽ ഇൻസ്റ്റാൾ ചെയ്യുക:
- Apply a thin layer of grease to the axle.
- Carefully position the new wheel, ensuring the brake rotor aligns with the caliper and the sprocket aligns with the chain.
- Insert the axle through the swingarm and wheel.
- Reinstall any spacers, chain adjusters, and brake caliper mounts.
- Tighten Axle Nut: Hand-tighten the axle nut, then use a torque wrench to tighten it to the manufacturer's specified torque value. Refer to your Honda CB190R service manual for the exact specification.
- ചെയിൻ ടെൻഷൻ ക്രമീകരിക്കുക: Adjust the chain tension according to your motorcycle's specifications.
- Check Brake Function: Pump the rear brake lever several times to ensure proper brake function before riding.
ചിത്രം 2: പിൻഭാഗം view of the orange motorcycle wheel, showing the sprocket mounting area and brake rotor attachment points. This perspective is useful for understanding component alignment during installation.
പ്രവർത്തന പരിഗണനകൾ
Once installed, the rear wheel operates as an integral part of your motorcycle's drivetrain and suspension system. No specific "operating" instructions are required for the wheel itself beyond ensuring proper installation and regular maintenance.
- Always ensure tire pressure is maintained at the manufacturer's recommended levels.
- Regularly check for any unusual noises or vibrations from the rear wheel area.
- Avoid riding with damaged or improperly installed wheels.
മെയിൻ്റനൻസ്
Regular maintenance extends the life of your rear wheel and ensures safe riding.
പതിവ് പരിശോധനകൾ:
- ടയർ മർദ്ദം: ഓരോ യാത്രയ്ക്കും മുമ്പ് ടയർ മർദ്ദം പരിശോധിക്കുക.
- വീൽ ബിയറിംഗ്സ്: Periodically check for play in the wheel bearings. Lift the rear wheel off the ground and try to move it side-to-side. Any significant play indicates worn bearings that require replacement.
- Spokes/Rim: Inspect the rim for dents or cracks and spokes (if applicable) for looseness or damage.
- Brake Rotor: Check the brake rotor for excessive wear, warping, or cracks.
- സ്പ്രോക്കറ്റ്: Inspect the rear sprocket for worn or hooked teeth.
- ശുചിത്വം: Keep the wheel clean to prevent dirt and grime buildup, which can hide damage or accelerate wear.
ക്ലീനിംഗ് നിർദ്ദേശങ്ങൾ:
Clean the wheel using mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the finish. Rinse thoroughly and dry with a soft cloth.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues related to the rear wheel.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Excessive wheel wobble or vibration |
|
|
| Squealing or grinding noise from wheel area |
|
|
| Difficulty with chain alignment |
|
|
If troubleshooting steps do not resolve the issue, consult a certified motorcycle mechanic.
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന തരം | Motorcycle Rear Wheel |
| ബ്രാൻഡ് | ജനറിക് |
| മോഡൽ അനുയോജ്യത | Honda CB190R (2020-2024) |
| ഭാഗം നമ്പർ | 42650-k70-630ZA |
| നിറം | ഓറഞ്ച് |
| എക്സ്റ്റീരിയർ ഫിനിഷ് | മെഷീൻ ചെയ്തു |
| മാതൃരാജ്യം | ചൈന |
വാറൻ്റിയും പിന്തുണയും
Specific warranty information for this product is not provided in the available data. Please refer to the seller's return policy or contact the seller directly for details regarding warranty coverage and support.
For technical assistance or further inquiries, it is recommended to contact the seller, JXLshop, or a qualified motorcycle service center.
- വിൽപ്പനക്കാരൻ: JXLshop
