HAUSHOF StainZapper Pro

HAUSHOF StainZapper Pro Portable Carpet and Upholstery Cleaner

Model: StainZapper Pro (HH23111)

ബ്രാൻഡ്: ഹൗഷോഫ്

1. ആമുഖം

Thank you for choosing the HAUSHOF StainZapper Pro Portable Carpet and Upholstery Cleaner. This device is designed for effective spot cleaning of fabric sofas, carpets, car interiors, and other upholstered surfaces. Its powerful suction and dual-tank system ensure thorough cleaning without secondary contamination. Please read this manual carefully before use to ensure safe and optimal operation.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

മുന്നറിയിപ്പ്: തീ, വൈദ്യുതാഘാതം അല്ലെങ്കിൽ പരിക്കുകൾ എന്നിവയ്ക്കുള്ള സാധ്യത കുറയ്ക്കുന്നതിന്, എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിച്ച് പാലിക്കുക.

  • വൃത്തിയാക്കുന്നതിനോ അറ്റകുറ്റപ്പണി നടത്തുന്നതിനോ മുമ്പായി പവർ ഔട്ട്‌ലെറ്റിൽ നിന്ന് ഉപകരണം എപ്പോഴും വിച്ഛേദിക്കുക.
  • ഉപകരണം വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
  • Use only HAUSHOF recommended cleaning solutions or low-foaming detergents. Excessive foaming can cause leaks and overflow from the dirty water tank.
  • മുടി, അയഞ്ഞ വസ്ത്രങ്ങൾ, വിരലുകൾ, ശരീരത്തിൻ്റെ എല്ലാ ഭാഗങ്ങളും തുറസ്സുകളിൽ നിന്നും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്നും അകറ്റി നിർത്തുക.
  • Do not use the appliance on wet surfaces or outdoors.
  • കത്തുന്നതോ പുകവലിക്കുന്നതോ ആയ സിഗരറ്റ്, തീപ്പെട്ടി, ചൂടുള്ള ചാരം എന്നിവയൊന്നും എടുക്കരുത്.
  • സ്ഥലത്ത് ടാങ്കുകൾ ഇല്ലാതെ ഉപയോഗിക്കരുത്.
  • കുട്ടികളെ മേൽനോട്ടം വഹിക്കുകയും അവർ ഉപകരണവുമായി കളിക്കുന്നില്ലെന്ന് ഉറപ്പാക്കുകയും ചെയ്യുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

ഘടകങ്ങൾ

The HAUSHOF StainZapper Pro includes the following main components:

  • Main Unit with Handle
  • ശുദ്ധജല ടാങ്ക് (1500 മില്ലി ശേഷി)
  • വൃത്തികെട്ട വാട്ടർ ടാങ്ക് (800 മില്ലി ശേഷി)
  • Flexible Hose (160cm)
  • Large Brush Attachment (18cm)
  • Joint Brush Attachment
  • ഡിറ്റർജൻ്റ് കുപ്പി
  • അളക്കുന്ന കപ്പ്
Detailed diagram of the HAUSHOF StainZapper Pro portable carpet cleaner, highlighting its main components such as the clean water tank, dirty water tank, handle, hose, and cleaning nozzle.

Figure 3.1: HAUSHOF StainZapper Pro Components

Diagram showing the HAUSHOF StainZapper Pro's dual tank system with separate compartments for 1500ml clean water and 800ml dirty water, and an included detergent bottle.

Figure 3.2: Dual Tank System for Clean and Dirty Water

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡലിൻ്റെ പേര്StainZapper Pro
ശക്തി450W
സക്ഷൻ പവർ11.5 kPa
ശുദ്ധമായ വാട്ടർ ടാങ്ക് കപ്പാസിറ്റി1.5 ലിറ്റർ (1500 മില്ലി)
വൃത്തികെട്ട വാട്ടർ ടാങ്ക് ശേഷി0.8 ലിറ്റർ (800 മില്ലി)
ഉൽപ്പന്ന അളവുകൾ19.6 x 38.5 x 30 സെ.മീ
ഇനത്തിൻ്റെ ഭാരം3.85 കി.ഗ്രാം
ഹോസ് നീളം160 സെ.മീ
പവർ കോർഡ് നീളം300 സെ.മീ
ശബ്ദ നില85 ഡെസിബെൽ
Two images demonstrating the portability and compact storage of the HAUSHOF StainZapper Pro. One shows a person carrying it by its handle, the other shows it stored neatly in a cabinet.

Figure 3.3: Lightweight and Compact Design for Easy Storage

Diagram illustrating the reach of the HAUSHOF StainZapper Pro, showing its 160cm hose, 300cm power cord, and 18cm brush, suitable for cleaning stairs and other areas.

Figure 3.4: Hose and Power Cord Length for Extended Reach

4. സജ്ജീകരണം

  1. ഉപകരണം അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
  2. Assemble Tanks: Ensure the clean water tank and dirty water tank are correctly seated in the main unit. Press down firmly until you hear a click, indicating they are securely installed.
  3. ശുദ്ധജല ടാങ്ക് നിറയ്ക്കുക: Remove the clean water tank. Fill it with clean water up to the MAX line. Add a small amount of low-foaming cleaning solution using the provided measuring cup. Do not overfill.
  4. Attach Cleaning Nozzle: Connect the desired cleaning nozzle (large brush or joint brush) to the end of the flexible hose.
  5. പവർ ബന്ധിപ്പിക്കുക: അനുയോജ്യമായ ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.

Video 4.1: Demonstrates the setup process, including filling the clean water tank and attaching components.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The StainZapper Pro utilizes a three-step cleaning process: spray, brush, and vacuum.

Illustration depicting the three-in-one cleaning action of the HAUSHOF StainZapper Pro: spraying water, brushing the surface, and vacuuming up the dirty liquid.

Figure 5.1: All-in-One Cleaning Function: Spray, Brush, Vacuum

Step-by-step visual guide demonstrating the cleaning process with the HAUSHOF StainZapper Pro: spraying cleaning solution, brushing the stain, and then vacuuming up the dirty liquid from a sofa.

Figure 5.2: Three-Step Cleaning Process

  1. പവർ ഓൺ: ഉപകരണം ഓണാക്കാൻ പവർ ബട്ടൺ അമർത്തുക.
  2. സ്പ്രേ: Hold the cleaning nozzle over the stained area. Press the spray trigger to release the cleaning solution onto the stain.
  3. ബ്രഷ്: Gently scrub the stained area with the brush attachment to loosen dirt and stains.
  4. വാക്വം: Release the spray trigger and slowly move the nozzle over the treated area to vacuum up the dirty solution. Repeat steps 2-4 as needed until the stain is removed.
  5. Intelligent Stop Feature: The appliance is equipped with an intelligent stop feature. When the dirty water in the wastewater tank reaches approximately 800ml (above the maximum fill line), the suction will automatically stop to prevent overflow. The motor will continue to run. At this point, turn off the machine, empty the dirty water tank, and then resume cleaning.

വ്യത്യസ്ത അറ്റാച്ച്മെൻ്റുകൾ ഉപയോഗിക്കുന്നു

Image showing two different cleaning attachments: a large brush for general deep cleaning and a narrow joint brush for cleaning tight spaces, both used on a sofa.

Figure 5.3: Large Brush and Joint Brush Attachments

  • Large Brush Attachment: Ideal for general deep cleaning of larger surfaces like carpets, rugs, and wide sofa areas.
  • Joint Brush Attachment: Designed for cleaning narrow gaps, crevices, and hard-to-reach areas such as sofa seams, car seat edges, and corners.

അപേക്ഷ എക്സിampലെസ്

A person using the HAUSHOF StainZapper Pro with the large brush attachment to clean a visible brown stain on a light-colored patterned carpet.

Figure 5.4: Cleaning a Carpet Stain

Portable vacuum cleaning sofa.

Figure 5.5: Cleaning a Sofa

Car interior cleaning.

Figure 5.6: Cleaning Car Seats

6. പരിപാലനം

  1. ശൂന്യമായ വൃത്തികെട്ട വാട്ടർ ടാങ്ക്: After each use, or when the intelligent stop feature activates, remove the dirty water tank and empty its contents into a drain. Rinse the tank thoroughly with clean water.
  2. Clean Nozzle and Hose: Disconnect the cleaning nozzle and rinse it under running water. Flush the hose with clean water to prevent blockages.
  3. പ്രധാന യൂണിറ്റ് വൃത്തിയാക്കുക: പ്രധാന യൂണിറ്റിന്റെ പുറംഭാഗം പരസ്യം ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഉപയോഗിക്കരുത്.
  4. സംഭരണം: Wrap the hose around the designated storage area on the main unit. Store the appliance and its attachments in a cool, dry place, away from direct sunlight and out of reach of children. The compact design allows for easy storage in cabinets.

Video 6.1: Demonstrates emptying the dirty water tank and cleaning the nozzle.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your HAUSHOF StainZapper Pro, please refer to the following common problems and solutions:

No Water Spraying

  • Check Clean Water Tank: Ensure the clean water tank is correctly installed and contains sufficient water and detergent. Press the tank firmly to ensure it clicks into place.
  • തടസ്സങ്ങൾക്കായി പരിശോധിക്കുക: Inspect the spray nozzle for any blockages. Clean if necessary.

വെള്ളം ചോർച്ച

Water leakage can occur due to several reasons:

Troubleshooting guide image showing common causes of water leakage in the HAUSHOF StainZapper Pro, including loose parts, missing sealing rings, clogged components, and blocked valve cables, with visual exampലെസ്.

Figure 7.1: Troubleshooting Water Leakage

  • Loose Tank: Ensure the clean and dirty water tanks are securely fastened and not loose.
  • Missing/Damaged Sealing Ring: Check if the sealing ring on the dirty water tank's lid is present and undamaged. A missing or damaged ring can cause leaks.
  • Clogged with Stains: If the dirty water tank's valve or components are clogged with debris or dried stains, it can prevent proper sealing. Clean these parts thoroughly.
  • Blocked Valve Cable: Ensure the valve cable (if applicable) is not blocked or obstructed, allowing the valve to close properly.

ഈ പോയിന്റുകൾ പരിശോധിച്ചതിന് ശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

8. വാറൻ്റിയും പിന്തുണയും

HAUSHOF products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official HAUSHOF webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.