sonecesiya Replacement Parts Kit for Dreame MOVA G30 Pro / G20 Master Robot Vacuums

1. ആമുഖം

This manual provides instructions for the installation, maintenance, and replacement of the sonecesiya accessory kit for Dreame MOVA G30 Pro and G20 Master robot vacuums. Regular replacement of these parts is crucial for maintaining your robot vacuum's cleaning efficiency and extending its lifespan.

2. പാക്കേജ് ഉള്ളടക്കം

The sonecesiya replacement parts kit includes the following components:

• 1x പ്രധാന റോളർ ബ്രഷ്
• 4x സൈഡ് ബ്രഷുകൾ
• 3x ഉയർന്ന കാര്യക്ഷമതയുള്ള ഫിൽട്ടറുകൾ
• 1x പൊടി ബാഗ്

ചിത്രം 2.1: ഓവർview of the replacement parts kit, showing the main brush, side brush, filter, and dust bag with their approximate dimensions.

3 അനുയോജ്യത

This replacement parts kit is designed for perfect compatibility with Dreame MOVA G30 Pro ഒപ്പം Dreame MOVA G20 Master robot vacuum cleaners. Using these parts ensures optimal performance and seamless integration with your device.

4. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

Always power off your robot vacuum and disconnect it from any charging base before attempting to replace any parts.

4.1. Replacing the Main Roller Brush

1. റോബോട്ട് വാക്വം തലകീഴായി തിരിക്കുക.
2. Locate the brush guard cover, usually secured by latches or screws. Open or remove it.
3. Carefully lift out the old main roller brush.
4. Insert the new main roller brush, ensuring the ends align with the slots in the vacuum. The brush features a removable swivel head for easy cleaning and a precision opening for full compatibility.
5. Close or reattach the brush guard cover.

Figure 4.1: The anti-tangle main roller brush, highlighting its precision opening for machine compatibility and removable swivel head for maintenance.

ചിത്രം 4.2: വിശദമായ ഒരു view of the main roller brush, made of high-quality rubber designed to effectively pick up hair and scrape away floor stains.

4.2. സൈഡ് ബ്രഷുകൾ മാറ്റിസ്ഥാപിക്കൽ

1. റോബോട്ട് വാക്വം തലകീഴായി തിരിക്കുക.
2. സൈഡ് ബ്രഷുകൾ കണ്ടെത്തുക. അവ സാധാരണയായി ഒരു സ്ക്രൂ ഉപയോഗിച്ചാണ് ഉറപ്പിച്ചിരിക്കുന്നത്.
3. Use a screwdriver to remove the screw and detach the old side brush.
4. Place a new side brush into position and secure it with the screw.

Figure 4.3: The three-arm side brush, designed with soft nylon bristles to effectively clean corners, edges, and crevices.

4.3. Replacing the High-Efficiency Filters

1. Open the dustbin compartment of your robot vacuum.
2. ഡസ്റ്റ്ബിൻ നീക്കം ചെയ്യുക.
3. Locate the filter assembly within the dustbin. Remove the old filter.
4. Insert the new high-efficiency filter into the designated slot, ensuring it is seated correctly.
5. Reinsert the dustbin into the robot vacuum.

Figure 4.4: A close-up of the high-efficiency particulate filter, designed to capture 99.97% of particles as small as 0.3 microns.

4.4. Replacing the Dust Bag

1. Open the dustbin compartment or the auto-empty station (if applicable) of your robot vacuum.
2. Carefully remove the full dust bag. The dust bag features a leak-proof push-pull handle for automatic closing upon removal, preventing dust leakage.
3. Insert a new dust bag, ensuring it is fully seated and the sealing mechanism is engaged.
4. കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക.

Figure 4.5: The dust bag, illustrating its leak-proof push-pull handle, automatic closing feature, rubber sealed loop, and good edge sealing for secure dust containment.

ചിത്രം 4.6: ഒരു പൂർണ്ണ view of the dust bag, composed of ultra-fine melt-blown fibers and non-woven fabric for high filtration and reduced leak risk.

5. പരിപാലന, മാറ്റിസ്ഥാപിക്കൽ ആവൃത്തി

Regular cleaning and timely replacement of parts are essential for optimal performance.

• പ്രധാന റോളർ ബ്രഷ്: Inspect weekly for tangled hair or debris. Clean as needed. Replace every 6-12 months, or sooner if wear is visible.
• സൈഡ് ബ്രഷുകൾ: Inspect weekly for wear or damage. Clean as needed. Replace every 3-6 months, or sooner if bristles are bent or missing.
• High-Efficiency Filters: Tap clean weekly to remove dust. Do not wash with water. Replace every 2-3 months, or more frequently if you have pets or allergies.
• പൊടി ബാഗ്: Replace when full, or as indicated by your robot vacuum's app or indicator light.

6 സ്പെസിഫിക്കേഷനുകൾ

7. പ്രശ്‌നപരിഹാരം

• കുറച്ച സക്ഷൻ പവർ: Check if the filter is clogged or installed incorrectly. Ensure the dust bag is not full and is properly sealed.
• Brushes Not Spinning: Inspect the main roller brush and side brushes for tangled hair or debris. Ensure they are correctly installed and not obstructed.
• അസാധാരണമായ ശബ്ദങ്ങൾ: Remove and re-install all brushes and the dustbin to ensure proper seating. Check for any foreign objects caught in the brushes or vacuum path.
• ഭാഗങ്ങൾ യോജിക്കുന്നില്ല: Double-check the compatibility of the parts with your specific Dreame MOVA G30 Pro or G20 Master model. Refer to Section 3.

8. വാറൻ്റിയും പിന്തുണയും

For any questions regarding the installation, maintenance, or performance of your sonecesiya replacement parts, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.