OAE 51.2V 100Ah Wall Mounted LiFePO4 Battery Pack User Manual

1. ആമുഖം

This manual provides essential instructions for the safe and efficient operation of your OAE 51.2V 100Ah Wall Mounted LiFePO4 Battery Pack (Model: LP-AF51AA). This high-performance lithium iron phosphate battery is designed for reliable and efficient energy storage in various applications, including off-grid solar systems, backup power, and grid-tied installations. It features a robust Battery Management System (BMS) for optimal performance and safety.

Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent damage to the product or injury.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• Always wear appropriate personal protective equipment (PPE) during installation and maintenance, including safety glasses and insulated gloves.
• Ensure the battery is installed in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
• Do not attempt to open, disassemble, or modify the battery pack. This can lead to severe injury, fire, or explosion.
• ബാറ്ററി ടെർമിനലുകളുടെ ഷോർട്ട് സർക്യൂട്ട് ഒഴിവാക്കുക.
• കുട്ടികളിൽ നിന്നും വളർത്തുമൃഗങ്ങളിൽ നിന്നും ബാറ്ററി സൂക്ഷിക്കുക.
• In case of fire, use a Class D fire extinguisher. Water can exacerbate lithium battery fires.
• Refer to local regulations for proper disposal of LiFePO4 batteries.

3. ഉൽപ്പന്ന ഘടകങ്ങളും സവിശേഷതകളും

The OAE LP-AF51AA battery pack includes the following key features:

• High-Performance 100Ah LiFePO4 Battery: Grade A lithium phosphate cells for long-lasting performance and stability.
• Advanced Battery Management System (BMS): Optimizes performance, ensures safety, and prevents overcharging, overheating, and short-circuiting. Includes RS485/CAN communication function.
• നീണ്ട ബാറ്ററി ലൈഫ്: Over 6000 deep cycles with a continuous discharge current of 100A.
• Real-time Monitor: External LCD screen for monitoring battery data and operating status. External wireless module for remote data monitoring and control.
• വാൾ മൗണ്ടഡ് ഡിസൈൻ: Compact and efficient for various energy storage needs.

Figure 1: OAE 51.2V 100Ah Wall Mounted LiFePO4 Battery Pack (LP-AF51AA).

Figure 2: Key features of the OAE LiFePO4 Battery, highlighting the Smart BMS, safety, 6000 cycles, and plug-and-play installation.

Figure 3: Front panel showing the LCD display, power switch, and various communication ports (RS485, RS232, CAN).

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section outlines the steps for installing your OAE LiFePO4 battery pack. Professional installation is recommended.

4.1 അൺപാക്കിംഗും പരിശോധനയും

• Carefully unpack the battery pack and inspect for any visible damage. Report any damage to your supplier immediately.
• പാക്കിംഗ് ലിസ്റ്റിൽ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

4.2 സൈറ്റ് തിരഞ്ഞെടുക്കൽ

• Install the battery in a cool, dry, and well-ventilated area.
• Avoid direct sunlight, high temperatures, and high humidity.
• Ensure the mounting surface is strong enough to support the battery's weight (130.7 pounds / 59.28 kg).
• Maintain adequate clearance around the battery for ventilation and maintenance.

4.3 Assembly and Wiring

The following video demonstrates the internal assembly and wiring process. While the product is typically pre-assembled, understanding these steps is crucial for maintenance or advanced configurations.

1. Measure Cell Voltage: Before assembly, measure the voltage of each cell to ensure they are consistent.
2. Install Epoxy Boards: Place the provided epoxy boards and insulating cotton within the battery enclosure to ensure proper insulation and cell separation.
3. Position Battery Cells: Carefully place the battery cells into the enclosure, following the positive and negative sequence as indicated. Ensure insulating cotton is placed between cell rows.
4. Install BMS Board: Secure the BMS board using M6 screws, ensuring no gaps.
5. Connect BMS Wires: Connect the balance wires from the battery cells to the BMS board. Ensure correct polarity and sequence (B- to B+).
6. Connect Busbars: Install the busbars to connect the battery cells in series. Tighten all nuts with a torque wrench to between 6 to 8 Nm.
7. Connect Display and Power Cables: Connect the display and power switch cables to the front cover.
8. Install Fire Protection: Attach the fire protection component (if included in your model).
9. സുരക്ഷിത കവറുകൾ: Place the epoxy cover and the main cover plate, tightening them with M4 black screws.

4.4 പ്രാരംഭ പവർ-അപ്പ്

• എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും കൃത്യവുമാണെന്ന് ഉറപ്പാക്കുക.
• Press and hold the ON/OFF power button for three seconds. The 4.3-inch touch screen will activate.
• During the first installation, an "overcharge protection fault" prompt may appear. This can be cleared via the "JK" APP.

4.5 മൊബൈൽ ആപ്പ് കോൺഫിഗറേഷൻ

• Download and install the "Extreme Air" (JK) APP on your smartphone.
• Hold your phone close to the device and tap the APP to detect the device name.
• Connect via Bluetooth. Enter the pairing password "123456" to authorize.
• Once connected, detailed information will be displayed.
• Navigate to Settings -> "Verify PWD" and enter "123456" to authorize.
• Click "Lifepo4" to set the battery capacity (e.g., 100Ah).
• In "Details Settings," set "Continued Charge Current (A)" to 150A. This will eliminate the overcharge fault.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പൊതു പ്രവർത്തനം

• Ensure the battery is properly connected to your inverter or charge controller.
• Turn on the battery using the ON/OFF switch on the front panel.
• Monitor the battery status via the integrated LCD screen or the mobile application.

5.2 ചാർജിംഗ്

• Connect a compatible LiFePO4 charger or solar charge controller to the battery.
• Ensure charging parameters (voltage, current) are within the battery's specifications (e.g., 51.2V nominal, 100A max charge current).
• The BMS will manage the charging process to prevent overcharging.

5.3 ഡിസ്ചാർജ് ചെയ്യുന്നു

• Connect your load (e.g., inverter, appliances) to the battery terminals.
• The battery supports a continuous discharge current of 100A. Do not exceed this limit.
• The BMS will protect against over-discharge.

Figure 4: Diagram illustrating the integration of the LiFePO4 battery into a home solar system, connecting to solar panels, an inverter, and household appliances.

6. പരിപാലനം

• പതിവ് പരിശോധന: Periodically inspect the battery for any signs of damage, loose connections, or corrosion.
• വൃത്തിയാക്കൽ: Keep the battery clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use solvents or abrasive cleaners.
• താപനില നിയന്ത്രണം: Ensure the operating environment temperature remains within the recommended range to maximize battery lifespan.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: നിർമ്മാതാവ് പരിശോധിക്കുക website or the mobile app for any available firmware updates for the BMS.
• ദീർഘകാല സംഭരണം: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place. Recharge every 3-6 months.

7. പ്രശ്‌നപരിഹാരം

ഈ വിഭാഗം പൊതുവായ പ്രശ്നങ്ങൾക്കുള്ള പരിഹാരങ്ങൾ നൽകുന്നു. ഇവിടെ പട്ടികപ്പെടുത്തിയിട്ടില്ലാത്ത പ്രശ്നങ്ങൾക്ക്, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 5: Detailed dimensions of the OAE LP-AF51AA battery pack.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation provided with your purchase or contact OAE customer support directly. Extended protection plans may be available for purchase.

For technical assistance, troubleshooting, or general inquiries, please contact OAE customer support through their official channels. Refer to the product packaging or the OAE brand store on Amazon for contact details.

നിർമ്മാതാവ്: Top one power