1. ആമുഖം
This manual provides essential information for the safe assembly, operation, and maintenance of your Ciays 43-Inch Rectangular Propane Fire Pit. Please read all instructions carefully before using the product to ensure proper function and safety.

Image 1.1: Ciays 43-Inch Rectangular Propane Fire Pit with windshield and protective cover.
2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: Failure to follow these instructions could result in fire, explosion, or carbon monoxide poisoning, which could cause property damage, personal injury, or death.
- Always maintain a safe distance from the fire pit to combustible materials.
- Use only approved fuel types (Liquefied Petroleum Gas).
- ഉപയോഗിക്കുമ്പോൾ കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അഗ്നികുണ്ഡത്തിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Always extinguish the fire before leaving or going to sleep.
- Store the fire pit in a cool, dry place when not in use.
- ഈ അല്ലെങ്കിൽ മറ്റേതെങ്കിലും ഉപകരണത്തിൻ്റെ പരിസരത്ത് ഗ്യാസോലിൻ അല്ലെങ്കിൽ മറ്റ് കത്തുന്ന നീരാവി, ദ്രാവകങ്ങൾ എന്നിവ സൂക്ഷിക്കുകയോ ഉപയോഗിക്കുകയോ ചെയ്യരുത്.
- ഉപയോഗത്തിനായി ബന്ധിപ്പിച്ചിട്ടില്ലാത്ത ഒരു എൽപി സിലിണ്ടർ ഇതിൻ്റെയോ മറ്റേതെങ്കിലും ഉപകരണത്തിൻ്റെയോ പരിസരത്ത് സൂക്ഷിക്കാൻ പാടില്ല.
- ഔട്ട്ഡോർ ഉപയോഗത്തിന് മാത്രം. വീടിനുള്ളിൽ ഉപയോഗിക്കരുത്.
- അസംബ്ലിക്കും പ്രവർത്തനത്തിനും മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not attempt to assemble or operate the fire pit. Contact customer service for assistance.
- ഫയർ പിറ്റ് ടേബിൾ യൂണിറ്റ്
- 304 സ്റ്റെയിൻലെസ് സ്റ്റീൽ H-ബേണർ (മുൻകൂട്ടി ഇൻസ്റ്റാൾ ചെയ്തത്)
- Glass Stones (for burner area)
- Transparent Wind Guard (glass panels and corner brackets)
- Protective Cover (for tabletop)
- Ignition Battery (AAA or AA, typically included)
- ഹാർഡ്വെയർ പായ്ക്ക് (സ്ക്രൂകൾ, വാഷറുകൾ, നട്ടുകൾ)
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
4. അസംബ്ലി നിർദ്ദേശങ്ങൾ
Assembly typically requires two people and takes approximately 60-90 minutes. Tools required: Phillips head screwdriver, adjustable wrench (not included).
- ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഭാഗങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. പോറലുകൾ ഉണ്ടാകാതിരിക്കാൻ മൃദുവായതും വൃത്തിയുള്ളതുമായ ഒരു പ്രതലത്തിൽ വയ്ക്കുക.
- അടിസ്ഥാന ഘടന കൂട്ടിച്ചേർക്കുക: Follow the diagrams in the included paper manual to connect the side panels and base frame. Ensure all screws are tightened securely.
- ടേബിൾടോപ്പ് ഘടിപ്പിക്കുക: Carefully place the tabletop onto the assembled base. Secure it using the provided hardware.
- Install Propane Tank Holder: If not pre-installed, secure the propane tank retention screw or strap inside the cabinet.
- ഗ്യാസ് ലൈൻ ബന്ധിപ്പിക്കുക: Connect the gas hose from the burner to the control valve, then to the propane tank regulator. Ensure all connections are hand-tight, then use a wrench for a final snug fit. Do not overtighten.
- Place Glass Stones: Distribute the glass stones evenly over the burner area, ensuring not to block the igniter or burner holes.
- Assemble Wind Guard: Attach the glass panels to the corner brackets using the provided hardware. Place the assembled wind guard around the burner opening.
- Install Ignition Battery: Insert the specified battery (e.g., AAA) into the igniter button compartment.

Image 4.1: The fire pit features a spacious 43-inch top and a cabinet for a standard 20 lb propane tank (not included).
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1. Connecting the Propane Tank
- ഫയർ പിറ്റിലെ കൺട്രോൾ നോബ് "ഓഫ്" സ്ഥാനത്താണെന്ന് ഉറപ്പാക്കുക.
- Open the cabinet door and place a standard 20 lb propane tank upright inside.
- Connect the regulator hose to the propane tank valve. Turn the black coupling nut clockwise until fully tightened.
- Secure the propane tank using the internal retention mechanism.
- Perform a leak test: Apply a soapy water solution to all gas connections. Open the propane tank valve. If bubbles appear, there is a leak. Close the tank valve immediately and re-tighten connections. Repeat until no bubbles are present. Do not operate if a leak persists.
5.2. Lighting the Fire Pit
- പ്രൊപ്പെയ്ൻ ടാങ്ക് വാൽവ് പൂർണ്ണമായും തുറന്നിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Push and hold the control knob in, then slowly turn it to the "LOW" position.
- While holding the control knob in, press and hold the igniter button repeatedly until the burner ignites.
- Once ignited, continue to hold the control knob in for 15-20 seconds to allow the thermocouple to heat up.
- Release the control knob. If the flame extinguishes, repeat steps 2-4.
5.3. ജ്വാല ക്രമീകരിക്കൽ
The fire pit features an infinite adjustment knob, allowing precise control over flame height and heat output.
- To increase flame height and heat, slowly turn the control knob towards the "HIGH" position.
- To decrease flame height and heat, slowly turn the control knob towards the "LOW" position.

Image 5.1: The stepless adjustment switch allows for precise control of flame intensity.
5.4. Turning Off the Fire Pit
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank by turning it clockwise until fully closed.
- മൂടുന്നതിനോ നീക്കുന്നതിനോ മുമ്പ് ഫയർ പിറ്റ് പൂർണ്ണമായും തണുക്കാൻ അനുവദിക്കുക.
6. പരിപാലനം
6.1. വൃത്തിയാക്കൽ
- ബാഹ്യ ഉപരിതലങ്ങൾ: Wipe with a soft cloth and mild soapy water. Rinse thoroughly and dry completely. Do not use abrasive cleaners or solvents.
- ബർണർ: Periodically inspect the burner for obstructions (e.g., spider webs, debris). Use a soft brush to clean burner ports.
- Glass Stones: The glass stones can be rinsed with water and allowed to dry before being placed back in the fire pit.
- Wind Guard: Clean glass panels with a glass cleaner and a soft cloth.
6.2. സംഭരണം
- Always ensure the fire pit is completely cool before covering or storing.
- Use the included protective cover to shield the fire pit from weather elements when not in use.
- Store the fire pit in a cool, dry location, away from direct sunlight and moisture.
- Disconnect the propane tank and store it in a well-ventilated area outdoors, away from heat sources and open flames.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your fire pit, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ബർണർ കത്തിക്കില്ല | No gas flow; Igniter battery dead; Igniter electrode dirty or damaged; Air in gas line | Check propane tank valve; Replace igniter battery; Clean or adjust igniter electrode; Purge air by repeating lighting procedure |
| Low flame or flickering | Low propane level; Regulator issue; Burner ports obstructed | Check propane tank level; Ensure regulator is fully connected; Clean burner ports |
| റിലീസിന് ശേഷം തീജ്വാല കെട്ടുപോകുന്നുasing control knob | Thermocouple not heated sufficiently; Thermocouple faulty | Hold control knob in for longer (15-20 seconds) after ignition; Contact customer service if issue persists |
| വാതക ഗന്ധം കണ്ടെത്തി | വാതക ചോർച്ച | Immediately turn off gas at tank. Perform leak test. Do not operate if leak persists. Contact emergency services if odor is strong. |
8 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: സിയേസ്
- മോഡൽ നമ്പർ: CIFPT53B-43-US, Inc. എന്നിവ പരിശോധിക്കുക
- ഉൽപ്പന്ന അളവുകൾ: 43"D x 25"W x 25"H
- മെറ്റീരിയൽ: അലോയ് സ്റ്റീൽ
- ഫിനിഷ് തരം: Lacquered
- രൂപം: ദീർഘചതുരം
- ഇനത്തിൻ്റെ ഭാരം: 63.93 പൗണ്ട്
- ഇന്ധന തരം: Liquefied Petroleum Gas (LP Gas)
- ഹീറ്റ് ഔട്ട്പുട്ട്: 60,000 ബി.ടി.യു
- നിറം: കറുപ്പ്
- UPC: 810158829602
9. വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Ciays webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.