MOUNTUP Freelift Dual Monitor Stand Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Dual Monitor Stand. Please read this manual thoroughly before installation to ensure correct setup and safe usage. Keep this manual for future reference.

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Failure to read and follow all instructions may result in personal injury or damage to the product. Always ensure the monitor stand is securely installed and that the weight of your monitors does not exceed the specified load capacity.

• Do not install on tempered glass table tops.
• Ensure your desk thickness is within the specified range for the chosen mounting method.
• Verify that your monitors are compatible with VESA 75x75mm or 100x100mm mounting patterns.
• Do not overtighten screws, as this may cause damage.
• ഇൻസ്റ്റാളേഷൻ സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.

പാക്കേജ് ഉള്ളടക്കം

Please check that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact MOUNTUP customer support.

പാക്കേജിൽ ഉൾപ്പെടുന്നു:

• Monitor Arms (2)
• മധ്യധ്രുവം
• C-clamp അടിസ്ഥാനം
• Grommet Base components
• VESA Plates (2)
• Hardware Kit (screws, washers, Allen keys)
• കേബിൾ മാനേജ്മെന്റ് ക്ലിപ്പുകൾ

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Step 1: Choose Your Mounting Option

Your monitor stand supports two installation methods: C-clamp mounting and Grommet mounting. Select the method suitable for your desk.

Image: Two Mounting Options
This image illustrates the C-clamp mounting option on the right and the grommet mounting option on the left, showing the different desk thickness requirements for each.

C-clamp ഇൻസ്റ്റലേഷൻ:

1. C-cl അറ്റാച്ചുചെയ്യുകamp to the base of the pole using the provided bolts and tighten them securely.
2. Secure the assembled stand to your desktop by tightening the C-clamp. Ensure your desk thickness is between 0.39'' - 2.76''.

ഗ്രോമെറ്റ് ഇൻസ്റ്റാളേഷൻ:

1. Detach the clip plate from the C-clamp and install the long bolt to the base.
2. Run the knob bolt through the bracket and the grommet hole to the base bottom. Tighten the bolt and install the decorative cover to the base. Ensure your desk thickness is between 0.39'' - 1.97'' and the hole diameter is 0.39'' - 2.36''.

Step 2: Install Monitor Arms

1. Slide the monitor arms onto the center pole and secure them at your desired height using the provided Allen key.
2. Attach the VESA plate to the back of your monitor using the appropriate screws and tighten them securely.
3. Slide the monitor (with VESA plate attached) onto the head of the upper arm, then install the security bolt to prevent accidental detachment. Repeat for the second monitor.

ഘട്ടം 3: കേബിൾ മാനേജ്മെൻ്റ്

Route your monitor cables through the integrated cable management channels on the arms and down the pole to maintain a tidy workspace.

Image: Cable Management
This image highlights the integrated cable management system within the monitor arm, showing how cables can be neatly routed.

നിങ്ങളുടെ മോണിറ്റർ സ്റ്റാൻഡ് പ്രവർത്തിപ്പിക്കുന്നു

The MOUNTUP Freelift Dual Monitor Stand offers full motion adjustment for optimal viewആശ്വാസം.

Image: Full Range of Motion
This image displays the various adjustment capabilities including height (up to 26.6 inches), extension (up to 18.1 inches), tilt (+70°/-45°), swivel (±90°), and 360° rotation.

ക്രമീകരണങ്ങൾ:

• ഉയരം ക്രമീകരിക്കൽ: The gas spring arm allows for smooth vertical movement. Adjust the arm to your preferred height. The maximum height is 26.6 inches.
• ടിൽറ്റ്: Monitors can be tilted +70° to -45° to reduce glare and optimize viewing angles. Loosen the tilting bolt, adjust to your desired angle, then retighten.
• സ്വിവൽ: Each monitor can swivel ±90° for easy screen sharing or collaborative work. The arm itself can swivel ±180°.
• റൊട്ടേഷൻ: Rotate your monitors 360° to switch between landscape and portrait modes.
• വിപുലീകരണം: The arms extend up to 18.1 inches, allowing you to position your monitors closer or further away from you.

Gas Spring Tension Adjustment:

If the monitor arm falls down or rises up unexpectedly, you may need to adjust the gas spring tension. Keep the arm in a horizontal position during adjustment.

• Arm Falls Down (monitor too heavy): Turn the adjustment screw counter-clockwise (towards '+') to increase tension until the arm can stay as intended. Each turn needs to be a full 360°.
• Arm Rises Up (monitor too light): Turn the adjustment screw clockwise (towards '-') to decrease tension until the arm can stay as intended. Each turn needs to be a full 360°.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and optimal performance of your monitor stand.

• എല്ലാ സ്ക്രൂകളും കണക്ഷനുകളും ഇറുകിയതാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് സ്റ്റാൻഡ് വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• Do not lubricate the gas spring mechanism.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues, refer to the solutions below or contact customer support.

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും:

• Issue: Monitor arm falls down.
  പരിഹാരം: The gas spring tension is too low for the monitor's weight. Keep the arm in a horizontal position and turn the adjustment screw counter-clockwise (towards '+') to increase tension. Each turn should be a full 360°.

Video: Freelift Dual Monitor Mount Troubleshooting (0:04 - 0:20)
This video demonstrates how to adjust the gas spring tension when the monitor arm falls down due to insufficient tension.

• Issue: Monitor arm rises up.
  പരിഹാരം: The gas spring tension is too high for the monitor's weight. Keep the arm in a horizontal position and turn the adjustment screw clockwise (towards '-') to decrease tension. Each turn should be a full 360°.

Video: Freelift Dual Monitor Mount Troubleshooting (0:21 - 0:38)
This video shows the process of adjusting the gas spring tension when the monitor arm rises up due to excessive tension.

• Issue: Monitor swivels loose or cannot swivel.
  പരിഹാരം: The swivel tension may need adjustment. Use an Allen key to tighten or loosen the screw at the swivel joint until the desired tightness is achieved.

Video: Freelift Dual Monitor Mount Troubleshooting (0:51 - 1:05)
This segment demonstrates how to adjust the tightness of the swivel mechanism using an Allen key.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

വാറൻ്റി വിവരങ്ങൾ:

This MOUNTUP product comes with a 3 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിൽ നിർമ്മാണ വൈകല്യങ്ങളും മെറ്റീരിയൽ പിഴവുകളും ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. അനുചിതമായ ഇൻസ്റ്റാളേഷൻ, ദുരുപയോഗം, അപകടങ്ങൾ, അല്ലെങ്കിൽ അനധികൃത പരിഷ്കാരങ്ങൾ എന്നിവ മൂലമുണ്ടാകുന്ന നാശനഷ്ടങ്ങൾക്ക് ഇത് പരിരക്ഷ നൽകുന്നില്ല.

ഉപഭോക്തൃ പിന്തുണ:

For technical assistance, missing parts, or warranty claims, please contact MOUNTUP customer support. Refer to the contact information provided with your product packaging or visit the official MOUNTUP webപിന്തുണാ വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.