ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DM25LEU/S-1.1/28 Electric Roller Blinds/Shades Tubular Motor Kit. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.
സുരക്ഷാ വിവരങ്ങൾ
ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണികൾക്ക് മുമ്പ് വൈദ്യുതി വിച്ഛേദിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
Do not expose the motor to water or excessive humidity.
Keep children and pets away from operating blinds.
Only use the specified 5V 2A Micro-USB charger for recharging.
Verify the dimensions of your roller shade tube (38mm / 1.5in) before installation.
പാക്കേജ് ഉള്ളടക്കം
The DM25LEU/S-1.1/28 kit includes the following components:
DM25LEU/S Bi-Directional Blinds Motor
DD2702H Handheld Controller
38mm Tube Brackets
Image: The complete kit including the tubular motor, handheld remote, and the mounting brackets.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | DM25LEU/S-1.1/28 |
| മോട്ടോർ വ്യാസം | 25mm (suitable for 38mm / 1.5in shade tube) |
| വാല്യംtage | USB: 5V 1A / 5V 2A |
| ടോർക്ക് | 1.1Nm |
| നിലവിലുള്ളത് | 1.25എ |
| വേഗത | 28rpm |
| Protection Rating (IP) | IP20 |
| ഉൽപ്പന്ന അളവുകൾ | 19"ലിറ്റർ x 1.8"വാട്ട് |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക്, മെറ്റൽ |
| നിയന്ത്രണ തരം | റിമോട്ട് |
| ഓപ്പറേഷൻ മോഡ് | ഓട്ടോമാറ്റിക് |
Image: Detailed diagram illustrating the motor's dimensions and a table of its technical specifications.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to install your tubular motor kit:
Prepare the Shade Tube
Ensure your roller shade tube has an inner diameter of 38mm (1.5 inches). The motor is designed to fit snugly inside this tube.
Image: Detailed diagram illustrating the motor's dimensions and its compatibility with a 38mm shade tube.
Insert the Motor
Carefully slide the DM25LEU/S motor into one end of the roller shade tube until it is fully seated. The motor's drive wheel should engage with the inner surface of the tube.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the motor's end, highlighting the drive wheel mechanism.
ബ്രാക്കറ്റുകൾ അറ്റാച്ചുചെയ്യുക
Secure the provided 38mm tube brackets to your window frame or wall. Ensure they are level and spaced correctly to support the roller shade assembly.
Image: The complete kit including the motor, handheld remote, and the mounting brackets.
ഷേഡ് മൗണ്ട് ചെയ്യുക
Place the assembled roller shade (with the motor inside) onto the installed brackets. Ensure it is securely seated and can rotate freely.
പവർ കണക്റ്റുചെയ്യുക
Connect the motor to a 5V 2A Micro-USB power source for initial charging and operation. The motor features a Micro-USB port for convenience.
Image: The tubular motor and its accompanying remote control. The motor has a visible charging port.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The DM25LEU/S motor is controlled by the DD2702H handheld controller.
വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ
The DD2702H handheld controller features several buttons for intuitive operation:
Up Arrow (▲): Moves the blinds upwards (opens).
Down Arrow (▼): Moves the blinds downwards (closes).
നിർത്തുക (■): Stops the blinds at the current position.
സെറ്റ് ബട്ടൺ: Used for programming limits and pairing (refer to programming section).
ചാനൽ തിരഞ്ഞെടുക്കൽ: The remote may have buttons or a display to select different channels if controlling multiple motors.
Image: The DD2702H handheld remote control, showing its digital display and control buttons.
അടിസ്ഥാന പ്രവർത്തനം
Open Blinds: അമർത്തുക മുകളിലേക്കുള്ള അമ്പടയാളം button to raise the blinds.
Close Blinds: അമർത്തുക താഴേക്കുള്ള അമ്പടയാളം button to lower the blinds.
Stop Blinds: അമർത്തുക നിർത്തുക button to halt the blinds at any desired position.
മുകളിലും താഴെയുമുള്ള പരിധികൾ ക്രമീകരിക്കുന്നു
To ensure the blinds stop precisely at your desired open and closed positions, you must set the upper and lower limits. Refer to the specific instructions provided with your remote control for detailed programming steps, as these can vary slightly by remote model.
പൊതുവായ ഘട്ടങ്ങളിൽ സാധാരണയായി ഇവ ഉൾപ്പെടുന്നു:
Entering programming mode (often by pressing a combination of buttons or a hidden button on the motor).
Moving the blinds to the desired upper limit and confirming.
Moving the blinds to the desired lower limit and confirming.
Exiting programming mode.
റിമോട്ട് കൺട്രോൾ ജോടിയാക്കുന്നു
If your remote is not responding, it may need to be paired with the motor. Consult your remote's specific pairing instructions. This usually involves a short press of a pairing button on the motor or a sequence of button presses on the remote while the motor is in pairing mode.
മെയിൻ്റനൻസ്
The DM25LEU/S motor is designed for low maintenance. Follow these guidelines to ensure longevity:
വൃത്തിയാക്കൽ: Wipe the motor and remote with a dry, soft cloth. Do not use abrasive cleaners or immerse in water.
ചാർജിംഗ്: Recharge the motor using a standard 5V 2A Micro-USB charger when the battery is low. A full charge ensures optimal performance.
Image: The motor's charging port, designed for a Micro-USB cable.
ബാറ്ററി ലൈഫ്: The motor uses a Li-ion rechargeable battery. Battery life will vary based on usage frequency. Recharge as needed.
പരിസ്ഥിതി വ്യവസ്ഥകൾ: Avoid exposing the motor to extreme temperatures or direct sunlight for prolonged periods.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your DM25LEU/S motor, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മോട്ടോർ റിമോട്ടിനോട് പ്രതികരിക്കുന്നില്ല. | Low battery in motor or remote; Remote not paired; Obstruction. | Charge the motor. Replace remote batteries. Re-pair the remote with the motor. Check for any physical obstructions preventing movement. |
| Blinds stop at incorrect positions. | Limits not set or incorrectly set. | Re-program the upper and lower limits using the remote control. |
| മോട്ടോർ അസാധാരണമായ ശബ്ദം പുറപ്പെടുവിക്കുന്നു. | Motor not properly seated in tube; Internal issue. | Ensure the motor is fully and correctly inserted into the shade tube. If noise persists, contact support. |
| Motor does not charge. | Faulty charging cable or adapter; Damaged charging port. | Try a different 5V 2A Micro-USB cable and adapter. Inspect the charging port for damage. |
വാറൻ്റിയും പിന്തുണയും
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer service department. Please have your model number (DM25LEU/S-1.1/28) and purchase information ready.
