Xvive U35 Wireless Microphone System Transmitter Instruction Manual

ആമുഖം

The Xvive U35 Wireless Microphone System Transmitter (U35TX) is designed to convert any dynamic microphone into a wireless unit, operating on the 5.8GHz band. This system provides a high-fidelity, low-latency solution for audio transmission in various professional settings, including live performances, studio recording, and video production. This manual provides essential information for setting up, operating, and maintaining your U35TX transmitter.

ബോക്സിൽ എന്താണുള്ളത്

• U35 ട്രാൻസ്മിറ്റർ
• യുഎസ്ബി-സി കേബിൾ
• PU Bag
• ഉപയോക്തൃ മാനുവൽ

Image: The Xvive U35TX Wireless Microphone Transmitter shown with its included USB-C cable, PU bag, and user manual.

പ്രധാന സവിശേഷതകൾ

• 5.8 GHz True Diversity Wireless System: Ensures a solid RF connection over a 100 ft (30.5 m) distance, minimizing interference.
• ക്രിസ്റ്റൽ ക്ലിയർ സൗണ്ട്: Offers a broad frequency response from 20Hz to 20kHz, 110 dB dynamic range, and 110 dB SNR, delivering high-resolution 24-bit/48kHz audio.
• അൾട്രാ ലോ ലേറ്റൻസി: Less than 5ms latency for real-time audio transmission.
• 6 Switchable Channels: Provides multiple options to avoid frequency interference.
• Mic/Line Mode: Switchable input sensitivity for dynamic microphones or line-level audio sources.
• നീണ്ട ബാറ്ററി ലൈഫ്: Up to 5 hours of operation on a single charge.
• ഒതുക്കമുള്ളതും മോടിയുള്ളതുമായ ഡിസൈൻ: Made with metal enclosure, designed for portability and reliability.

സജ്ജമാക്കുക

1 ഉപകരണം ചാർജ് ചെയ്യുന്നു

Before initial use, fully charge the U35TX transmitter using the provided USB-C cable. The cable is designed to charge both the transmitter and a compatible receiver simultaneously if you have the full system.

Image: The U35TX transmitter connected to a USB-C cable for charging. The cable can charge both transmitter and receiver units.

2. Connecting to a Microphone

1. Ensure your dynamic microphone is powered off.
2. Plug the U35TX transmitter directly into the XLR output of your dynamic microphone.
3. കണക്ഷൻ സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.

Image: The U35TX transmitter connected to the XLR output of a dynamic microphone, ready for wireless operation.

3. Connecting to a Receiver (Sold Separately or as part of a full system)

If you have a compatible U35 receiver, plug it into your audio interface, mixer, or PA system's XLR input.

Image: The U35TX transmitter (left) and U35RX receiver (right) connected to a mixing console, illustrating a typical wireless setup.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

അമർത്തിപ്പിടിക്കുക പവർ button on the U35TX transmitter to turn it on or off. The LED indicator will illuminate when the device is on.

2 ചാനൽ തിരഞ്ഞെടുക്കൽ

The U35TX offers 6 channels. To change the channel, press the ചാനൽ button. The blue LED display will show the current channel number. Ensure both the transmitter and receiver are set to the same channel for proper operation.

Image: Close-up of the U35TX transmitter highlighting the channel selection button and the blue LED channel indicator.

3. Mic/Line Mode Selection

The U35TX features a switchable MIC / LINE മോഡ്. ഉപയോഗിക്കുക എം.ഐ.സി mode for dynamic microphones and ലൈൻ mode for line-level audio sources (e.g., from a mixer or audio interface). Selecting the correct mode prevents signal distortion.

4. നിശബ്ദ പ്രവർത്തനം

അമർത്തുക നിശബ്ദമാക്കുക button to temporarily silence the audio transmission. Press it again to unmute.

5. Channel Scan (Receiver Function)

For optimal performance, especially in environments with potential interference, hold the receiver's channel button for 3 seconds to initiate a channel scan. This will automatically find the clearest available frequency.

Image: The U35TX transmitter and U35RX receiver in operation, illustrating the 5.8 GHz wireless connection and the channel scan function to find the best signal.

ഉൽപ്പന്ന പ്രദർശനങ്ങൾ

Xvive U35 Wireless Microphone System Overview

Detailed Look at the Xvive U35 System

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using liquid cleaners or solvents.
• സംഭരണം: Store the U35TX in the provided PU bag in a cool, dry place when not in use.
• ബാറ്ററി കെയർ: To prolong battery life, avoid fully discharging the unit frequently. Charge it regularly, even if not in constant use.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

The Xvive U35TX Wireless Microphone System Transmitter comes with a 1 വർഷത്തെ വാറൻ്റി. For technical support, troubleshooting assistance, or warranty claims, please visit the official Xvive website or contact Xvive customer service directly.

Official Xvive Store: Xvive Direct on Amazon