1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
Before beginning assembly, please read and understand all instructions. Failure to follow these instructions may result in injury or damage to the product.
- അസംബ്ലി ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.
- Always assemble the carport on a level surface.
- Securely anchor the carport to a stable foundation according to local building codes and ordinances.
- ശക്തമായ കാറ്റിലോ പ്രതികൂല കാലാവസ്ഥയിലോ ഒത്തുകൂടരുത്.
- Regularly clear snow from the roof to prevent excessive accumulation, which can damage the structure and pose a safety hazard.
- Wear appropriate safety gear during assembly, including gloves and eye protection.
- അസംബ്ലിക്ക് കുറഞ്ഞത് രണ്ട് പേരെങ്കിലും ഉണ്ടായിരിക്കണമെന്ന് ശുപാർശ ചെയ്യുന്നു.
മുന്നറിയിപ്പ്: Wind and snow loads are for reference only and assume a standalone unit without an enclosure kit, securely anchored according to local building codes. Local building code requirements vary by location; conformance to local codes is the responsibility of the purchaser.
2. പാക്കേജ് ഉള്ളടക്കം
Verify that all parts listed in the packing list are present before proceeding with assembly. If any parts are missing or damaged, please contact customer support.

ചിത്രം 2.1: Illustration of the carport's frame components and the simplified assembly process. This diagram shows the frame being built in stages, highlighting the ease of construction.
3. സജ്ജീകരണവും അസംബ്ലിയും
3.1 സൈറ്റ് തയ്യാറാക്കൽ
- Select a flat, level surface for installation. The carport can be installed on dirt, asphalt, or concrete.
- Clear the area of any debris, rocks, or obstructions.
- Ensure adequate space around the carport for assembly and future use.
3.2 അസംബ്ലി ഘട്ടങ്ങൾ
The MFSTUDIO carport features an innovative adaptive threaded pipe frame design for simplified assembly.
- ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: Carefully unpack all boxes and lay out components, verifying against the parts list. Wait for all shipping boxes to arrive before starting installation.
- ഫ്രെയിം കൂട്ടിച്ചേർക്കുക: Follow the detailed instructions provided in the assembly guide. The adaptive threaded pipe frame design shortens the installation process.
- മേൽക്കൂര പാനലുകൾ ഘടിപ്പിക്കുക: Secure the corrugated galvanized steel roof panels to the frame. Ensure proper alignment and secure fastening to prevent leaks and ensure structural integrity.
- Anchor Carport: Once the structure is complete, securely anchor the carport to the ground using the provided hardware. This is crucial for stability, especially in windy conditions.

ചിത്രം 3.1: ഒരു ക്ലോസപ്പ് view demonstrating the attachment of a roof panel to the carport frame, illustrating the ease of assembly.

ചിത്രം 3.2: Detail of the heavy-duty, corrosion-resistant steel tube frame, showcasing the robust construction and secure connections.
പ്രബോധന വീഡിയോ: For a visual guide, please refer to the official instruction video available on the product page or by contacting MFSTUDIO customer support.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The MFSTUDIO 10x20 ft Carport is designed to provide versatile outdoor shelter.
- വാഹന സംരക്ഷണം: Use the carport to protect cars, trucks, boats, and other vehicles from sun, rain, and light snow.
- Outdoor Shelter: The spacious design also makes it suitable for outdoor gatherings, temporary storage for dining sets, or as an event shelter for various occasions.

ചിത്രം 4.1: The MFSTUDIO carport providing shelter for a pickup truck, demonstrating its primary function.

ചിത്രം 4.2: The carport configured as an outdoor living area with seating and a dining table, showcasing അതിന്റെ വൈവിധ്യം.
5. പരിപാലനം
Proper maintenance will extend the lifespan of your MFSTUDIO carport.
- മഞ്ഞ് നീക്കം ചെയ്യൽ: Regularly clear snow from the roof. A heavy load of snow can damage the structure and create a safety hazard. Monitor weather conditions closely during winter.
- വൃത്തിയാക്കൽ: Clean the roof and frame periodically with mild soap and water to remove dirt and debris. Avoid abrasive cleaners that could damage the finish.
- പരിശോധന: Periodically inspect all bolts, connections, and anchors to ensure they remain tight and secure. Check for any signs of rust or damage to the frame and roof panels.
- തുരുമ്പ് തടയൽ: The frame is powder-coated and the roof is galvanized steel for rust resistance. However, promptly address any scratches or chips in the coating to prevent rust.

ചിത്രം 5.1: A carport with snow on its roof, illustrating the importance of regular snow removal for structural integrity.

ചിത്രം 5.2: A map highlighting regions prone to snowfall, accompanied by a reminder to clear snow from the carport roof.
6. പ്രശ്നപരിഹാരം
- Issue: Carport feels unstable after assembly.
പരിഹാരം: Ensure all bolts and connections are tightened securely. Verify that the carport is anchored properly to a stable foundation. Re-check the levelness of the installation surface.
- പ്രശ്നം: മേൽക്കൂരയിൽ നിന്ന് വെള്ളം ചോർന്നൊലിക്കുന്നു.
പരിഹാരം: Inspect roof panels for proper overlap and secure fastening. Ensure all screws are tight and any sealing elements are correctly installed. Check for any damage to the roof panels.
- Issue: Difficulty assembling pipes.
പരിഹാരം: Ensure pipes are correctly oriented according to the manual. Applying a small amount of lubricant (e.g., white lithium grease) to the joints can aid in sliding components together, as suggested by user feedback.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | MFSTUDIO |
| മോഡൽ നമ്പർ | Carport1020 |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 249"L x 120"W x 100"H (ഏകദേശം 20.75 അടി L x 10 അടി W x 8.33 അടി H) |
| മെറ്റീരിയൽ | Galvanized Steel Roof, Powder-Coated Iron Frame |
| നിറം | ചാരനിറം |
| ഇനത്തിൻ്റെ ഭാരം | 352 പൗണ്ട് |
| യുവി സംരക്ഷണം | Basic UV Protection |
| ജല പ്രതിരോധ നില | വാട്ടർപ്രൂഫ് |
| അസംബ്ലി ആവശ്യമാണ് | അതെ |

ചിത്രം 7.1: Detailed product dimensions, including length, width, and height measurements.
8. വാറൻ്റിയും പിന്തുണയും
8.1 വാറൻ്റി വിവരങ്ങൾ
For specific warranty details regarding your MFSTUDIO Carport, please refer to the documentation included with your purchase or contact MFSTUDIO customer support directly. Protection plans may also be available for extended coverage.
8.2 ഉപഭോക്തൃ പിന്തുണ
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact MFSTUDIO customer support.
- ഓൺലൈൻ പിന്തുണ: Visit the official MFSTUDIO webപതിവുചോദ്യങ്ങൾക്കും കോൺടാക്റ്റ് ഓപ്ഷനുകൾക്കുമുള്ള സൈറ്റ്.
- വിൽപ്പനക്കാരനെ ബന്ധപ്പെടുക: For purchases made through Amazon, you can contact the seller "MODERN - FURNITURE" directly via your Amazon order history.