1 സുരക്ഷാ വിവരങ്ങൾ
ഈ ഉൽപ്പന്നം ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ പ്രവർത്തിപ്പിക്കുന്നതിനോ മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിച്ച് മനസ്സിലാക്കുക. ഈ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് വൈദ്യുതാഘാതം, തീപിടുത്തം അല്ലെങ്കിൽ സ്വത്ത് നാശത്തിനോ വ്യക്തിപരമായ പരിക്കിനോ കാരണമായേക്കാവുന്ന മറ്റ് അപകടങ്ങൾക്ക് കാരണമായേക്കാം.
- ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ സർവീസ് ചെയ്യുന്നതിന് മുമ്പ് സർക്യൂട്ട് ബ്രേക്കറിൽ എല്ലായ്പ്പോഴും പവർ ഓഫ് ചെയ്യുക.
- ഇൻസ്റ്റാളേഷൻ പ്രക്രിയയെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുക.
- എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും പ്രാദേശിക കോഡുകളും ഓർഡിനൻസുകളും പാലിക്കുന്നുണ്ടെന്നും ഉറപ്പാക്കുക.
- Do not install on a dimmer switch.
- ഈ ഫിക്ചർ ബാഹ്യ ഉപയോഗത്തിനായി റേറ്റുചെയ്തിരിക്കുന്നു കൂടാതെ ജല പ്രതിരോധശേഷിയുള്ളതുമാണ്.
2. പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- LED Outdoor Flood Wall Light (1 unit)
- മൗണ്ടിംഗ് ഹാർഡ്വെയർ (സ്ക്രൂകൾ, വയർ കണക്ടറുകൾ)
- ഗാസ്കറ്റ്
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Figure 2.1: Product components and adjustable parts.
3. ഉൽപ്പന്ന സവിശേഷതകൾ
The Maxxima LED Outdoor Flood Wall Light is designed for reliable outdoor security and illumination.
- ശക്തമായ പ്രകാശം: Delivers 950 lumens of 3000K warm white light with an energy-efficient 13W design.
- വിപുലമായ ചലന കണ്ടെത്തൽ: PIR motion sensor with up to a 70 ft range.
- ക്രമീകരിക്കാവുന്ന ടൈമറുകൾ: Choose from 1, 5, or 10 minutes for how long the light stays on after motion detection.
- ഡസ്ക്-ടു-ഡോൺ സെൻസർ: Photocell sensor automatically operates at night and conserves energy during the day.
- ക്രമീകരിക്കാവുന്ന തല: Easily direct the light beam with a 180° vertical tilt.
- Adjustable Arm and Sensor: 90° vertical arm tilt and 180° vertical tilt & horizontal swivel for the motion sensor, with 360° sensor rotation.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Built with aluminum, rated for 50,000 lifetime hours, ETL listed.
വീഡിയോ 3.1: കഴിഞ്ഞുview of Maxxima LED Outdoor Flood Light features and adjustability.
4. ഇൻസ്റ്റലേഷൻ
4.1 ഫിക്സ്ചർ മൌണ്ട് ചെയ്യുന്നു
- ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ ഓഫ് ചെയ്യുക.
- Remove the existing fixture (if any) and disconnect wiring.
- Attach the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a weather-tight seal.
- ജംഗ്ഷൻ ബോക്സിൽ നിന്ന് മൗണ്ടിംഗ് പ്ലേറ്റിന്റെ മധ്യത്തിലുള്ള ദ്വാരത്തിലൂടെ ഇലക്ട്രിക്കൽ വയറുകൾ കടത്തിവിടുക.
4.2 വയറിംഗ് കണക്ഷനുകൾ
വയറുകൾ ഇനിപ്പറയുന്ന രീതിയിൽ ബന്ധിപ്പിക്കുക:
- ബന്ധിപ്പിക്കുക കറുപ്പ് ഫിക്സ്ചറിൽ നിന്ന് വയർ കറുപ്പ് (Live/Hot) wire from the junction box.
- ബന്ധിപ്പിക്കുക വെള്ള ഫിക്സ്ചറിൽ നിന്ന് വയർ വെള്ള (Neutral) wire from the junction box.
- ബന്ധിപ്പിക്കുക പച്ച ഫിക്സ്ചറിൽ നിന്ന് (ഗ്രൗണ്ട്) വയർ പച്ച or bare copper (Ground) wire from the junction box.
- Secure all connections with the provided wire connectors.

Figure 4.1: Wiring connections for the flood light.
4.3 അന്തിമ അസംബ്ലി
- എല്ലാ വയറുകളും ജംഗ്ഷൻ ബോക്സിലേക്ക് ശ്രദ്ധാപൂർവ്വം തിരുകുക.
- Align the fixture with the mounting plate and secure it with the remaining screws.
- സർക്യൂട്ട് ബ്രേക്കറിൽ വൈദ്യുതി പുനഃസ്ഥാപിക്കുക.

Figure 4.2: Installed flood light on an exterior wall.
5. Setup and Adjustments
The flood light features adjustable settings for the motion sensor and timer.
5.1 Adjusting the Sensor and Timer
The sensor unit has two adjustable dials located on its underside:
- TIMER Dial: Controls how long the light stays on after motion is detected. Options include 1 minute, 5 minutes, 10 minutes, or Dusk-to-Dawn (D2D).
- SENSITIVITY Dial: Adjusts the motion detection range. Options include 10 ft, 20 ft, 50 ft, or MAX (up to 70 ft).
To adjust, gently rotate the dials to your desired setting. The 'Test' mode on the TIMER dial allows for quick testing of motion detection during daylight hours.

Figure 5.1: Timer and Sensitivity adjustment dials.
5.2 Adjusting Light Head and Sensor Position
The light head and motion sensor can be adjusted to cover specific areas:
- The light head can be tilted up to 180° vertically.
- The arm connecting the sensor to the base can tilt 90° vertically.
- The motion sensor itself can tilt 180° vertically and swivel 180° horizontally, with a full 360° rotation capability.

Figure 5.2: Adjustable light head and motion sensor.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed and configured, the Maxxima LED Outdoor Flood Wall Light operates automatically based on its sensor settings.
- സന്ധ്യ മുതൽ പ്രഭാതം വരെയുള്ള മോഡ് (D2D): When the TIMER dial is set to D2D, the light will automatically turn on at dusk and remain on until dawn, regardless of motion.
- മോഷൻ സെൻസർ മോഡ്: When the TIMER dial is set to 1, 5, or 10 minutes, the light will activate when motion is detected within the set sensitivity range and ambient light conditions (typically at night). The light will remain on for the selected duration after the last motion is detected, then turn off.
- ടെസ്റ്റ് മോഡ്: Setting the TIMER dial to 'Test' allows you to verify motion detection during daylight. The light will turn on for a few seconds when motion is detected, then turn off. This mode is useful for positioning the sensor.
7. പരിപാലനം
This LED flood light requires minimal maintenance.
- വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ മൃദുവായ, ഡി ക്ലീനർ ഉപയോഗിച്ച് ഫിക്സ്ചർ തുടയ്ക്കുക.amp അഴുക്കും അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- പരിശോധന: Regularly check for any loose connections or damage to the wiring or housing.
- The integrated LED light source is not user-replaceable.
8. പ്രശ്നപരിഹാരം
If you experience issues with your flood light, refer to the following table for common problems and solutions.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. | No power; incorrect wiring; sensor settings. | Check circuit breaker. Verify wiring connections. Adjust sensor to 'Test' mode to confirm functionality. Ensure ambient light is low enough for operation (if not in D2D). |
| വെളിച്ചം തുടർച്ചയായി തുടരുന്നു. | Sensor in D2D mode; constant motion detected; faulty sensor. | Check if TIMER dial is set to D2D. Ensure no objects are causing continuous motion detection. If problem persists, contact support. |
| Light turns on too frequently or not enough. | Sensitivity setting; sensor obstruction. | Adjust SENSITIVITY dial. Clear any obstructions from the sensor's field of view. |
| ലൈറ്റ് മിന്നുന്നു. | Loose wiring; power fluctuations. | Turn off power and check all wiring connections. Consult an electrician if power fluctuations are suspected. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| മോഡലിൻ്റെ പേര് | MEL-S1013100W |
| ബ്രാൻഡ് | മാക്സിമ |
| ലൈറ്റ് ഔട്ട്പുട്ട് | 950 ല്യൂമെൻസ് |
| വാട്ട്tage | 13 വാട്ട്സ് |
| വർണ്ണ താപനില | 3000 കെൽവിൻ (വാം വൈറ്റ്) |
| വാല്യംtage | 120 വോൾട്ട് |
| മെറ്റീരിയൽ | അലുമിനിയം |
| ഫിനിഷ് തരം | ചായം പൂശി |
| മോഷൻ സെൻസർ ശ്രേണി | 70 അടി വരെ |
| ബീം സ്പ്രെഡ് | 220° |
| ആജീവനാന്ത റേറ്റിംഗ് | 50,000 മണിക്കൂർ |
| സർട്ടിഫിക്കേഷൻ | ETL ലിസ്റ്റുചെയ്തിരിക്കുന്നു |
| ഉൽപ്പന്ന അളവുകൾ | 4.4"L x 6"W x 6"H |
| ഇനത്തിൻ്റെ ഭാരം | 11.2 ഔൺസ് (0.7 പൗണ്ട്) |
10. വാറൻ്റി
This Maxxima LED Outdoor Flood Wall Light is backed by a 3 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
11. പിന്തുണ
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer service.
Visit the Maxxima Store: MaxximaLEDLighting on Amazon
Maxxima is an American company with USA-based offices and customer service.





