sonecesiya Replacement Accessories Kit Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, maintenance, and replacement of components in your sonecesiya Replacement Accessories Kit. This kit is designed to maintain the optimal cleaning performance of your compatible robot vacuum cleaner. Please read these instructions carefully before use.

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 2 x Main Brushes
• 8 x സൈഡ് ബ്രഷുകൾ
• 4 x Filters (HEPA)
• 6 x Mop Pads
• 6 x ഡസ്റ്റ് ബാഗുകൾ
• 2 x Mop Cloth Holders

അനുയോജ്യത

This accessory kit is compatible with the following robot vacuum cleaner models:

• Xiaomi X10 Plus
• Mijia Omni 1S B101CN
• ഡ്രീം L10s അൾട്രാ
• Dreame S10 Pro

Ensure your robot vacuum model matches one of the listed compatible devices before installation.

ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

Always power off and unplug your robot vacuum cleaner before attempting any installation or replacement of parts.

1. Main Brush Installation

1. Turn the robot vacuum cleaner upside down.
2. Locate the main brush cover, usually secured by latches or screws.
3. Open or unscrew the cover to access the main brush compartment.
4. Remove the old main brush.
5. Insert the new main brush, ensuring the ends align with the slots in the vacuum.
6. Close the main brush cover and secure it.

2. സൈഡ് ബ്രഷ് ഇൻസ്റ്റലേഷൻ

1. Turn the robot vacuum cleaner upside down.
2. Locate the side brush(es). They are usually held by a single screw or clip.
3. Unscrew or unclip the old side brush and remove it.
4. Align the new side brush with the post and press it down firmly, or secure it with the screw.

3. Filter (HEPA) Installation

1. Open the dustbin compartment of your robot vacuum.
2. ഡസ്റ്റ്ബിൻ നീക്കം ചെയ്യുക.
3. Locate the filter housing within the dustbin.
4. പഴയ ഫിൽട്ടർ നീക്കം ചെയ്യുക.
5. Insert the new HEPA filter into the housing, ensuring it fits snugly.
6. Reinstall the dustbin into the robot vacuum.

4. Mop Pad Installation

1. Locate the mop cloth holder on your robot vacuum.
2. Attach a clean mop pad to the mop cloth holder. Most mop pads use a hook-and-loop (Velcro-style) fastening system.
3. Ensure the mop pad is securely attached and evenly spread.
4. Install the mop cloth holder with the attached mop pad onto the robot vacuum.

5. Dust Bag Installation

1. Open the cleaning station or the dust collection compartment of your robot vacuum (depending on model).
2. Remove the full dust bag.
3. Insert a new dust bag, ensuring it is properly seated and the opening aligns with the vacuum's suction port.
4. കമ്പാർട്ട്മെന്റ് സുരക്ഷിതമായി അടയ്ക്കുക.

മെയിൻ്റനൻസ്

Regular maintenance of your robot vacuum's accessories ensures optimal performance and extends their lifespan. Always power off and unplug your robot vacuum cleaner before performing maintenance.

1. Main Brush Maintenance

• ആവൃത്തി: Clean weekly, replace every 3-6 months depending on usage.
• വൃത്തിയാക്കൽ: Remove the main brush as per installation instructions. Use the cleaning tool (often provided with the vacuum) to cut and remove tangled hair and debris. Wipe the brush and its bearings with a dry cloth.

2. Side Brush Maintenance

• ആവൃത്തി: Clean monthly, replace every 3-6 months depending on usage.
• വൃത്തിയാക്കൽ: Remove the side brush. Remove any tangled hair or debris from the bristles and the brush post. If bristles are bent, you can soak them in warm water for a few minutes to help them regain their shape. Ensure they are completely dry before reinstallation.

3. Filter (HEPA) Maintenance

• ആവൃത്തി: Clean weekly, replace every 2-3 months depending on usage.
• വൃത്തിയാക്കൽ: Remove the filter from the dustbin. Gently tap the filter against a trash can to dislodge dust. You can also use a small brush or a vacuum cleaner on a low setting to clean the pleats. Do not wash HEPA filters with water unless explicitly stated by your vacuum's manufacturer.

4. Mop Pad Maintenance

• ആവൃത്തി: Wash after each use, replace every 1-3 months depending on usage.
• വൃത്തിയാക്കൽ: Remove the mop pad from the holder. Hand wash with mild detergent and warm water, or machine wash on a gentle cycle. Air dry completely before reattaching to the mop cloth holder.

5. Dust Bag Maintenance

• ആവൃത്തി: Replace when full, typically every 4-8 weeks depending on usage and household debris.
• മാറ്റിസ്ഥാപിക്കൽ: Follow the dust bag installation instructions to replace a full bag with a new one. Dust bags are designed for single use and should not be emptied and reused.

ട്രബിൾഷൂട്ടിംഗ്

If your robot vacuum cleaner's performance decreases after replacing parts, consider the following:

• കുറച്ച സക്ഷൻ: Ensure the HEPA filter is clean and correctly installed. Check the dust bag for fullness and proper seating.
• Poor Sweeping: Verify that side brushes are free of tangles and correctly installed.
• Ineffective Mopping: Ensure mop pads are clean, damp (if applicable to your model), and securely attached to the holder.
• അസാധാരണമായ ശബ്ദങ്ങൾ: Check main and side brushes for tangled hair or debris that might be causing obstruction. Ensure all parts are securely installed.
• അനുയോജ്യത: Double-check that the replacement parts are indeed compatible with your specific robot vacuum model as listed in this manual.

For further assistance, refer to your robot vacuum cleaner's original instruction manual or contact the manufacturer's support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For any questions regarding the installation, maintenance, or performance of your sonecesiya Replacement Accessories Kit, please contact your retailer or the manufacturer directly. Keep your purchase receipt for warranty purposes, if applicable. Specific warranty details may vary by region and retailer.