Ledvion 6-Pack Round LED Recessed Ground Spots User Manual

ആമുഖം

Thank you for choosing Ledvion LED Recessed Ground Spots. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Installation should only be performed by a qualified electrician in accordance with local electrical codes. Ensure the power supply is disconnected before installation or maintenance.
• ഔട്ട്ഡോർ ഉപയോഗം: These ground spots are designed for outdoor use with an IP67 rating, meaning they are protected against dust and immersion in water up to 1 meter for 30 minutes. However, ensure all connections are properly sealed and waterproofed to maintain this rating.
• കേബിൾ കണക്ഷൻ: The product comes with a 1-meter connection cable (3 x 1.5 mm²) without a plug. This requires a secure, waterproof connection to your main power supply.
• പ്ലേസ്മെൻ്റ്: Ensure the installation location allows for proper drainage and does not accumulate standing water for extended periods.
• ഭാരം വഹിക്കുന്ന: These ground spots are designed to be walkable. Ensure they are installed flush with the ground surface to prevent tripping hazards and damage.
• താപനില: Do not cover the lights with insulating material that could lead to overheating.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

Image: Contents of the Ledvion 6-pack ground spot package, showing 6 LED ground spot fixtures, 6 LED GU10 bulbs, 24 screws, 6 Allen keys, and 1 manual.

• 6 x LED Ground Spot fixtures
• 6 x GU10 LED Bulbs (5W, 6500K)
• 24 x മൗണ്ടിംഗ് സ്ക്രൂകൾ
• 6 x അലൻ കീകൾ
• 1 x ഉപയോക്തൃ മാനുവൽ

സ്പെസിഫിക്കേഷനുകൾ

Image: Diagram showing the dimensions of the ground spot fixture: 110mm top diameter, 82mm body diameter, and 148mm height, alongside the 1-meter cable.

Image: EU Energy Label for Ledvion LVB10004, showing energy efficiency class G and 5 kWh/1000h consumption. For more details, visit EPREL ഡാറ്റാബേസ്.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

പ്രധാനപ്പെട്ടത്: Ensure the main power supply is switched off before beginning any installation work.

1. ഇൻസ്റ്റലേഷൻ സൈറ്റ് തയ്യാറാക്കുക: Dig a hole in the desired location that is slightly larger than the ground spot's body (82mm diameter, 148mm height) to allow for proper drainage and cable routing. Ensure the ground is level.
2. കേബിൾ റൂട്ടിംഗ്: Route the 1-meter connection cable from the ground spot to your main power supply or junction box. Use appropriate outdoor-rated cabling and waterproof connectors (e.g., IP68 T-connectors or waterproof connectors like SKU: LV50023, LV50024) for all connections to maintain the IP67 rating.
3. ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the ground spot's cable to your power supply. This product does not come with a plug, requiring a direct, secure electrical connection. Ensure correct wiring (Live, Neutral, Earth).
4. Insert GU10 Bulb: Carefully insert the provided GU10 LED bulb into the fixture. Align the pins with the socket and twist to secure.
5. Position the Fixture: Place the ground spot fixture into the prepared hole. Ensure the top surface is flush with the ground level to prevent water accumulation and tripping hazards.
6. ഫിക്‌ചർ സുരക്ഷിതമാക്കുക: Use the provided screws and Allen key to secure the top ring of the fixture, if applicable, or ensure the fixture is firmly seated in the ground.
7. ടെസ്റ്റ്: Once all connections are secure and waterproofed, restore power and test the lights.

Image: Illustration demonstrating the connection process for Ledvion ground spots, showing an installation cable, IP68 T-connector, and IP68 waterproof connector for extending the wiring.

Image: Three Ledvion ground spots illuminating a garden lawn, demonstrating typical outdoor placement.

Image: Ledvion ground spots installed along a curved garden pathway, providing ambient lighting.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once properly installed and connected to the power supply, the Ledvion ground spots operate simply:

• പവർ ഓൺ/ഓഫ്: Control the lights using the main switch connected to your outdoor lighting circuit.
• യാന്ത്രിക പ്രവർത്തനം: For automatic operation, connect the ground spots to an external timer or a dusk-to-dawn sensor (not included).

മെയിൻ്റനൻസ്

Regular maintenance ensures optimal performance and longevity of your Ledvion ground spots.

• വൃത്തിയാക്കൽ: Periodically clean the tempered glass surface to remove dirt, leaves, or debris that may obstruct light output. Use a soft, damp ആവശ്യമെങ്കിൽ തുണിയും വീര്യം കുറഞ്ഞ ഡിറ്റർജന്റും ഉപയോഗിക്കുക. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
• പരിശോധന: Regularly inspect the fixtures and cables for any signs of damage, wear, or loose connections. Address any issues promptly to maintain the IP67 rating.
• ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: To replace a GU10 bulb, ensure the power is off. Carefully remove the top ring of the fixture (if applicable) or access the bulb compartment. Twist and pull out the old bulb, then insert the new GU10 bulb by aligning the pins and twisting to secure. Ensure the replacement bulb does not exceed 15W.
• ഈട്: The stainless steel construction and tempered glass are designed for long-lasting outdoor use, offering anti-rust and anti-moisture properties.

Image: A close-up of the ground spot in wet grass, emphasizing its IP67 water and dust resistant rating, along with anti-rust and anti-moisture features.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the ground spot's interior, indicating compatibility with any GU10 spot up to a maximum of 15 watts.

ട്രബിൾഷൂട്ടിംഗ്

വാറൻ്റിയും പിന്തുണയും

Ledvion products are manufactured with high-quality materials and craftsmanship. This product comes with a 3 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ, മെറ്റീരിയലുകളിലെയും ജോലിയിലെയും പോരായ്മകൾ ഉൾക്കൊള്ളുന്നു.

Image: Ledvion ground spot highlighting a "3 YEAR WARRANTY" badge, emphasizing its stainless steel construction and tempered glass for long-lasting use, with anti-rust and corrosion resistance.

വാറൻ്റി ക്ലെയിമുകൾ: In case of a warranty claim, please contact your original point of purchase or Ledvion customer support directly. Keep your proof of purchase for warranty validation.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:
Tecvion B.V.
Hogebrink 2020
3871 KB Hoevelaken
നെതർലാൻഡ്സ്

ഉൽപ്പന്നത്തിലെ ഏതെങ്കിലും അനധികൃത മാറ്റങ്ങളോ പരിഷ്കാരങ്ങളോ വാറന്റി അസാധുവാകും.