AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your AirheadStorm CLB084-4D 12V Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's electric ride-on cars, offering a 2.4G remote control system with a slow start function for enhanced safety.

ശരിയായ പ്രവർത്തനവും സുരക്ഷയും ഉറപ്പാക്കാൻ ഇൻസ്റ്റാളേഷനും ഉപയോഗത്തിനും മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുക.

സുരക്ഷാ വിവരങ്ങൾ

• Ensure the electric vehicle's power is OFF before installing or replacing any components.
• Always verify that the replacement parts match the original specifications (e.g., model number, voltage) to prevent damage.
• Regularly inspect the vehicle's motor, battery, and wiring for any signs of wear or damage. Replace faulty components immediately.
• Keep electronic components away from water and excessive moisture.
• Adult supervision is required during installation and when children operate the ride-on car.

പാക്കേജ് ഉള്ളടക്കം

The AirheadStorm CLB084-4D kit includes the following components:

• 1 x Receiver (CLB084-4D 12V Control Box)
• 1 x Remote Control (2.4G White Remote Control)

Image: The CLB084-4D receiver and its corresponding 2.4G remote control. The receiver is a black box with wiring, and the remote is white with black buttons.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. അനുയോജ്യതാ പരിശോധന

Before installation, ensure that the CLB084-4D 12V control box is compatible with your children's ride-on toy. This model is compatible with CLB084-4C 12V systems. Visually compare the appearance and model number of the new parts with your original components.

Image: A comparison showing the CLB084-4A/4C/4D remote (white light indicator) and receiver on the left, and the CLB084-4F remote (red light indicator) and receiver on the right. This helps identify the correct model for replacement.

2. ഇൻസ്റ്റാളേഷന് മുമ്പുള്ള പരിശോധനകൾ

Verify that other essential functions of the ride-on car, such as the motor and battery, are in normal working condition before installing the new controller and remote.

3 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. Turn off the power to the children's electric vehicle.
2. Carefully remove the old receiver (control box) from the vehicle. Note the wiring connections.
3. Connect the new CLB084-4D receiver to the vehicle's wiring harness, ensuring all connections are secure and match the original configuration.
4. Secure the receiver in its designated location within the vehicle.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. വിദൂര നിയന്ത്രണ പ്രവർത്തനം

Image: Diagram illustrating the buttons on the 2.4G remote control, including Forward/Backward, Left/Right movement, Emergency Stop, and Speed Adjustment buttons, along with gear indicator lights.

1. പവർ ബട്ടൺ: റിമോട്ട് കൺട്രോൾ ഓണാക്കാൻ അമർത്തുക.
2. Signal Matching: To match the remote control with the receiver:
   • Ensure the vehicle's power is OFF.
   • " അമർത്തിപ്പിടിക്കുകസ്പീഡ് അഡ്ജസ്റ്റ്മെന്റ് ബട്ടൺ"ഒപ്പം"എമർജൻസി സ്റ്റോപ്പ് ബട്ടൺ" simultaneously for 5 seconds.
   • While holding, turn on the vehicle's power.
   • When the gear indicator light on the remote control illuminates steadily (does not flash), the signal is successfully matched. The front wheels of the vehicle will turn left and right for one second to confirm.
   • The matching process is available for approximately 2 minutes after the vehicle is powered on.

2. വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ

• Forward/Backward Button: Controls the vehicle's movement direction.
• Left/Right Movement Button: Controls the vehicle's steering.
• എമർജൻസി സ്റ്റോപ്പ് ബട്ടൺ: Immediately stops the vehicle.
• സ്പീഡ് അഡ്ജസ്റ്റ്മെൻ്റ് ബട്ടൺ: Cycles through different speed settings (1st, 2nd, 3rd gear, indicated by lights).

3. സ്ലീപ്പ് മോഡ്

The remote control will enter sleep mode if there is no operation for approximately 1 minute. To reactivate, press any button.

മെയിൻ്റനൻസ്

• Keep the remote control and receiver clean and dry. Wipe with a soft, dry cloth.
• Avoid dropping or subjecting the components to strong impacts.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ കിറ്റ് തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
• Check battery compartment of the remote control periodically for corrosion and replace batteries as needed.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ