ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ഉൽപ്പന്നം കഴിഞ്ഞുview

This manual provides instructions for the installation and maintenance of the Generic Replacement Dryer Drum Rollers, compatible with Kenmore 1106707702 and similar models. These parts are designed to replace worn or damaged drum rollers in your dryer, ensuring smooth and efficient operation of the appliance.

Important: Always verify compatibility with your specific dryer model before proceeding with installation. Appliance parts can appear similar but may not be interchangeable.

ഭാഗങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്

പാക്കേജിൽ സാധാരണയായി ഇനിപ്പറയുന്ന ഘടകങ്ങൾ ഉൾപ്പെടുന്നു:

• Dryer Drum Rollers (Quantity: 2, as shown in image)
• Associated hardware (e.g., washers, clips, as shown in image)

Image: Two dryer drum rollers, each with a black rubber wheel and a metallic bearing hub. To the right, there are four triangular beige clips and one black circular washer, representing the associated hardware for installation.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Replacing dryer drum rollers requires disassembling parts of your dryer. If you are not comfortable with appliance repair, it is recommended to consult a qualified technician.

1. സുരക്ഷ ആദ്യം: Before beginning any repair, ensure the dryer is unplugged from the electrical outlet and the gas supply (if applicable) is turned off.
2. Access the Drum: Depending on your dryer model, you may need to remove the top panel, front panel, or both to gain access to the dryer drum and its support components. Refer to your specific dryer's service manual for detailed disassembly instructions.
3. Locate Old Rollers: Identify the existing drum rollers. There are typically two at the front and two at the rear, supporting the dryer drum.
4. Remove Old Rollers: Carefully remove the old, worn, or damaged drum rollers. This usually involves removing a retaining clip or bolt that holds the roller in place. Note the orientation and placement of all components.
5. Install New Rollers: Install the new Generic Replacement Dryer Drum Rollers in the same position and orientation as the old ones. Ensure they are securely fastened with the provided or existing hardware.
6. Inspect and Reassemble: Before reassembling the dryer, inspect the drum for any other signs of wear or damage. Ensure the drum spins freely on the new rollers. Reassemble the dryer panels in reverse order of disassembly, ensuring all connections and fasteners are secure.
7. ടെസ്റ്റ് ഓപ്പറേഷൻ: Plug the dryer back in and turn on the gas supply (if applicable). Run a short cycle to ensure the drum rotates smoothly and quietly.

മെയിൻ്റനൻസ്

Proper maintenance can extend the life of your dryer and its components:

• പതിവ് വൃത്തിയാക്കൽ: Periodically clean the lint trap after every load. Also, clean the dryer vent system at least once a year to prevent lint buildup, which can strain dryer components.
• ശബ്ദങ്ങൾ ശ്രദ്ധിക്കുക: Pay attention to any unusual noises coming from your dryer, such as squealing, thumping, or grinding. These can indicate worn drum rollers or other failing components.
• ഓവർലോഡിംഗ് ഒഴിവാക്കുക: Overloading the dryer can put excessive strain on the drum rollers and motor, leading to premature wear.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues after replacing the drum rollers, consider the following:

• Dryer Not Tumbling: Ensure the drive belt is properly seated around the drum and motor pulley. Check if the motor is functioning.
• Loud Squealing/Thumping: Re-check the installation of the new rollers. Ensure they are properly lubricated (if applicable, check product specifications) and securely mounted. Verify that no other components are rubbing against the drum.
• Drum Not Spinning Smoothly: Ensure the drum is correctly seated on all rollers. Check for any obstructions or misaligned parts.
• വൈബ്രേഷൻ: Ensure the dryer is level and stable. Check that all internal components are securely fastened.

If problems persist, it is advisable to consult a professional appliance repair technician.

സ്പെസിഫിക്കേഷനുകൾ

പിന്തുണ

For further assistance or inquiries regarding this product, please contact the manufacturer, Fricparts, or the seller, Fricgore, through their official support channels.