DinoFire AAA+USB A&C+BT

DinoFire USB Type C Wireless Presentation Clicker Instruction Manual

Model: AAA+USB A&C+BT (WP506)

1. ആമുഖം

Thank you for choosing the DinoFire USB Type C Wireless Presentation Clicker. This device is designed to enhance your presentations with its dual Bluetooth and 2.4GHz RF connectivity, versatile USB-A and USB-C compatibility, and ergonomic design. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

DinoFire USB Type C Wireless Presentation Clicker

Image: The DinoFire USB Type C Wireless Presentation Clicker, a sleek black device with control buttons.

2 സുരക്ഷാ വിവരങ്ങൾ

  • ലേസർ സുരക്ഷ: Do not point the laser beam directly at people or animals. Avoid direct eye exposure to the laser beam. This product uses a Class 2 laser.
  • ബാറ്ററി കൈകാര്യം ചെയ്യൽ: Use only specified AAA batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries according to local regulations.
  • സംഭരണം: ഉപകരണത്തെ തീവ്രമായ താപനില, നേരിട്ടുള്ള സൂര്യപ്രകാശം, ഈർപ്പം എന്നിവയിൽ നിന്ന് അകറ്റി നിർത്തുക.
  • കുട്ടികൾ: കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. സജ്ജീകരണം

3.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. Locate the battery compartment cover on the back of the presenter.
  2. കവർ തുറക്കുക.
  3. Insert two AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
  4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
Battery compartment and USB receiver storage

Image: The presenter showing the battery compartment and the integrated USB receiver storage.

3.2. Connecting via USB Receiver (2.4GHz RF Mode)

  1. Open the battery compartment cover and remove the integrated USB receiver. This receiver features both USB-A and USB-C connectors for broad compatibility.
  2. Plug the appropriate connector (USB-A or USB-C) of the receiver into an available USB port on your computer.
  3. Turn on the presenter using the ON/OFF switch located on the side.
  4. The computer should automatically detect and install the necessary drivers. The presenter is now ready for use in 2.4GHz RF mode.
USB A and Type C in one receiver

Image: Close-up of the dual USB-A and USB-C receiver, highlighting its versatile design.

3.3. Connecting via Bluetooth (BT Mode)

  1. Ensure the presenter is turned on.
  2. അമർത്തിപ്പിടിക്കുക ബന്ധിപ്പിക്കുക button (usually a small circular button near the laser pointer) for a few seconds until the indicator light flashes, indicating pairing mode.
  3. നിങ്ങളുടെ കമ്പ്യൂട്ടറിൽ, ബ്ലൂടൂത്ത് ക്രമീകരണങ്ങളിലേക്ക് പോയി പുതിയ ഉപകരണങ്ങൾക്കായി തിരയുക.
  4. Select "DinoFire Presenter" (or similar name) from the list of available devices to pair.
  5. Once paired, the indicator light on the presenter will stop flashing and remain solid. The presenter is now ready for use in Bluetooth mode.
  6. To switch between BT and RF modes, simply press the dedicated BT/RF switch button on the presenter.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The DinoFire Wireless Presentation Clicker offers a range of functions to control your presentations effectively.

  • പേജ് മുകളിലേക്കും താഴേക്കും: അമ്പടയാള ബട്ടണുകൾ ഉപയോഗിക്കുക ( / ) to navigate through your presentation slides.
  • ലേസർ പോയിന്റർ: Press the dedicated laser button (often a triangle icon) to activate the bright laser light for highlighting key areas.
  • Full/Black Screen: A dedicated button allows you to toggle between a full screen display and a black screen to draw audience attention.
  • വോളിയം നിയന്ത്രണം: Adjust the audio volume of your computer directly from the presenter.
  • Hyperlink Activation: Activate hyperlinks within your presentation with a dedicated button.
  • Window Switching: Seamlessly switch between open windows on your computer.
  • ഓട്ടോമാറ്റിക് സ്ലീപ്പ് മോഡ്: The presenter automatically enters sleep mode after 30 seconds of inactivity to conserve energy. Press any button to wake it up.
Multi-featured Presentation Pointer buttons

Image: Diagram illustrating the various functions of the presentation clicker buttons, including page navigation, window switching, hyperlink, and volume control.

5. സവിശേഷതകൾ

  • BT & RF 2.4 GHz Dual Modes: Quickly switch between Bluetooth and 2.4GHz RF modes for flexible connectivity with various devices.
  • Plug & Play USB A & C Connectors: Equipped with dual USB-A/USB-C connectors combined in one receiver for universal compatibility with laptops and desktop computers.
  • എർഗണോമിക് ഡിസൈൻ: Features a curved design for a comfortable grip, allowing for extended use without discomfort.
  • ലോംഗ് കൺട്രോൾ വയർലെസ് റേഞ്ച്: Enjoy a maximum wireless control range of 164 feet (50 meters), providing freedom to move around the room during presentations.
  • Bright Laser Light: The integrated laser pointer helps to effectively highlight content on your slides.
Long Control Range of the presenter

Image: Illustration showing the presenter's long control range, indicating up to 164 feet for wireless control and 628 feet for laser light.

Comfortable grip of the presenter

Image: A hand holding the presenter, illustrating its comfortable, ergonomic grip.

6. പരിപാലനം

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the surface of the presenter. Do not use abrasive cleaners or solvents.
  • സംഭരണം: When not in use, store the USB receiver inside the presenter's battery compartment to prevent loss. Store the presenter in a cool, dry place.
  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries when the indicator light shows low power or when the device becomes unresponsive.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Presenter not responding (RF Mode)USB receiver not properly connected or not detected.പ്രവർത്തിക്കുന്ന ഒരു USB പോർട്ടിൽ USB റിസീവർ പൂർണ്ണമായും ചേർത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. മറ്റൊരു USB പോർട്ട് പരീക്ഷിക്കുക.
Presenter not responding (Bluetooth Mode)Not paired or out of range.Ensure Bluetooth is enabled on your computer. Re-pair the device following the Bluetooth connection steps. Move closer to the computer.
ലേസർ പോയിൻ്റർ പ്രവർത്തിക്കുന്നില്ലLow battery or laser button not pressed.Replace batteries. Ensure the laser button is pressed firmly.
ചെറിയ വയർലെസ് ശ്രേണിInterference or obstacles.Minimize obstacles between the presenter and the receiver. Avoid using near other wireless devices that may cause interference.
Presenter automatically enters sleep mode too quicklyThis is normal behavior for energy saving.Press any button to wake the presenter from sleep mode.

8 സ്പെസിഫിക്കേഷനുകൾ

  • ബ്രാൻഡ്: ഡിനോഫയർ
  • മോഡലിൻ്റെ പേര്: AAA+USB A&C+BT
  • Model Number (Mfr Part Number): WP506
  • കണക്റ്റിവിറ്റി ടെക്നോളജി: Bluetooth, Radio Frequency (2.4GHz)
  • Max Wireless Control Range: 164 അടി (50 മീറ്റർ)
  • അനുയോജ്യമായ ഉപകരണങ്ങൾ: Laptops, Desktop Computers (Bluetooth-enabled)
  • റിസീവർ: Dual USB-A / USB-C
  • ബാറ്ററി തരം: 2 x AAA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)
  • പ്രത്യേക സവിശേഷത: Ergonomic Design, Laser Pointer, Dual Mode Connectivity
  • നിറം: കറുപ്പ്

9. വാറൻ്റിയും പിന്തുണയും

The DinoFire USB Type C Wireless Presentation Clicker comes with a 3 വർഷത്തെ വാറൻ്റി.

For technical support, troubleshooting assistance, or warranty claims, please contact DinoFire customer service through the retailer where the product was purchased or visit the official DinoFire webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.

നിർമ്മാതാവ്: Shenzhen Qixun Space Technology Co., Ltd.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.