BONTEC Rolling TV Stand (Model FN311-BK) User Manual

ആമുഖം

This manual provides detailed instructions for the assembly, operation, and maintenance of your BONTEC Rolling TV Stand, Model FN311-BK. This stand is designed to accommodate most flat or curved LCD LED OLED screens ranging from 32 to 75 inches, with a maximum VESA compatibility of 400x400mm and a load capacity of up to 110 lbs. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

സുരക്ഷാ വിവരങ്ങൾ

• ഭാരം ശേഷി: Do not exceed the maximum load capacity of 110 lbs (50 kg). Overloading can result in serious injury or product damage.
• ടിവി വലുപ്പം: Ensure your TV size is within the recommended range of 32-75 inches.
• VESA അനുയോജ്യത: Verify your TV's VESA mounting pattern is compatible (Min: 100x100mm, Max: 400x400mm).
• അസംബ്ലി: Follow all assembly steps precisely. If you have any questions, contact customer support.
• സ്ഥിരത: ആകസ്മികമായ ചലനം തടയുന്നതിന് ടിവി സ്റ്റാൻഡ് നിശ്ചലമായിരിക്കുമ്പോൾ എല്ലായ്പ്പോഴും കാസ്റ്ററുകൾ പൂട്ടുക.
• കുട്ടികൾ: Keep children away from the TV stand during assembly and ensure it is stable before leaving them unsupervised near it.
• പരിസ്ഥിതി: Use the stand on a flat, stable surface. Avoid placing it in areas with excessive vibration or direct sunlight.

പാക്കേജ് ഉള്ളടക്കം

Please check that all components and hardware are present before beginning assembly. If any parts are missing or damaged, please contact BONTEC customer service.

പാക്കേജിൽ സാധാരണയായി ഉൾപ്പെടുന്നു:

• അടിസ്ഥാന ഘടകങ്ങൾ
• Vertical poles (bottom, middle, top sections)
• TV mounting plate and brackets
• കാസ്റ്ററുകൾ (ചക്രങ്ങൾ)
• കേബിൾ മാനേജ്മെന്റ് ക്ലിപ്പുകൾ
• All necessary screws, washers, and tools (e.g., Allen key)

അസംബ്ലി നിർദ്ദേശങ്ങൾ

For a visual guide, please refer to the installation video below. Follow these steps carefully for proper assembly.

1. Attach the TV Brackets to Your TV:
   • For flat screen TVs, secure the TV brackets to the back of your TV using the appropriate screws and washers.
   • For curved TVs, use the provided spacers along with the screws and washers to ensure a secure fit.
2. അടിസ്ഥാനം കൂട്ടിച്ചേർക്കുക: Connect the base components using the provided screws and Allen key. Ensure all connections are tight.
3. Attach the Casters to the Base: Screw the four 360-degree locking casters into the designated holes on the base. Use the provided wrench to tighten them securely.
4. Insert the Bottom Poles: Slide the bottom sections of the vertical poles into the base and secure them with the provided screws.
5. Connect the Poles: Join the top, middle, and bottom pole sections using the connectors. Tighten with the Allen key. Ensure the poles are aligned and securely fastened.
6. ടിവി പ്ലേറ്റ് അറ്റാച്ചുചെയ്യുക: Secure the TV plate to the top section of the vertical poles using the provided hardware.
7. Hook the TV Brackets onto the TV Plate: Carefully lift your TV and hook the attached TV brackets onto the TV plate. Ensure the TV is securely seated. If HDMI ports are blocked, adjust the hook height on the TV brackets.
8. Cable Management Options: Utilize the integrated cable management system. You can either route cables through the internal conduit of the poles or use the external clips to keep wires organized and reduce clutter. If a plug is too large for the conduit, use the clips.

Note on Leveling:

If the TV cart is not level after assembly, adjust the caster height by turning the bottom nuts on each caster. Once level, tighten the top nuts to lock them in place.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ഉയരം ക്രമീകരിക്കൽ

The BONTEC Rolling TV Stand offers 5 height levels for the TV mounting plate, allowing for a total adjustable height range of approximately 48.8 to 57.1 inches. To adjust the height, loosen the tool-free butterfly knobs on the vertical poles, slide the TV mounting plate to your desired height, and then securely tighten the knobs.

Image: The stand features 5-level height adjustment, easily managed with a wing nut design.

മൊബിലിറ്റി

The stand is equipped with four 360-degree swivel locking casters. These casters allow for smooth and quiet movement across various surfaces. To move the stand, unlock all four casters. To secure the stand in a stationary position, press down on the locking mechanism on each caster until it clicks into place.

Image: The TV stand is designed for easy movement using 360-degree silent casters.

കേബിൾ മാനേജ്മെൻ്റ്

The stand offers two options for cable management: internal conduit and external clips. For a clean, integrated look, route cables through the hollow vertical poles. If plugs are too large for the internal conduit, use the provided clips to secure cables neatly along the exterior of the poles.

Image: Two cable management options are available to keep wires organized.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ്, ഡി തുണി ഉപയോഗിച്ച് സ്റ്റാൻഡ് തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• പതിവ് പരിശോധനകൾ: എല്ലാ സ്ക്രൂകളും കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക.
• കാസ്റ്റർ കെയർ: Keep casters free of debris to ensure smooth movement.

ട്രബിൾഷൂട്ടിംഗ്

Stand is not level

If the TV stand appears uneven, adjust the height of individual casters. Loosen the top nut on the caster, turn the bottom nut to raise or lower the caster, and then re-tighten the top nut to lock it in place.

Cables do not fit through conduit

If a cable plug is too large to pass through the internal cable conduit, utilize the external cable management clips provided to secure the cables neatly along the outside of the poles.

ടിവിക്ക് സ്ഥിരതയില്ല

Ensure all assembly screws are tightened securely. Verify that the TV brackets are correctly hooked onto the TV plate and that the safety screws are engaged. Always lock the casters when the stand is stationary.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the documentation included with your product or visit the official BONTEC website. If you encounter any issues not covered in this manual, please contact BONTEC customer service for assistance.