X-Sense SMS0A Motion Detector (2-Pack) Instruction Manual

1. ആമുഖം

The X-Sense SMS0A Motion Detector is an accessory designed to expand your X-Sense home security system. This 2-pack of motion sensors is compatible with X-Sense AS05, AS08, and AS12 security kits and requires an SBS50A Base Station (sold separately) for full functionality. These compact, battery-powered sensors provide reliable motion detection and integrate seamlessly with your existing X-Sense security setup, offering enhanced coverage for various areas of your home.

2 സുരക്ഷാ വിവരങ്ങൾ

• ചെയ്യരുത് attempt to repair or modify the device. Refer all servicing to qualified personnel.
• ചെയ്യരുത് expose the device to extreme temperatures, direct sunlight, or excessive moisture.
• Ensure batteries are inserted with correct polarity. Dispose of used batteries responsibly according to local regulations.
• കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമല്ലാത്തവിധം ഉപകരണം സൂക്ഷിക്കുക.
• ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.

3. പാക്കേജ് ഉള്ളടക്കം

Your X-Sense SMS0A Motion Detector package includes the following items:

• 2 x X-Sense SMS0A Motion Detectors
• 4 x AAA Batteries (2 per detector, pre-installed or included separately)
• Adhesive Tape for mounting
• മൗണ്ടിംഗ് സ്ക്രൂകളും വാൾ പ്ലഗുകളും

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The X-Sense SMS0A Motion Detector is a compact and versatile sensor designed to detect movement within its coverage area. It communicates wirelessly with the X-Sense SBS50A Base Station, which then relays information to your smartphone via the X-Sense Home Security App.

ചിത്രം: An illustration of a complete X-Sense smart security kit, demonstrating how various sensors, including motion detectors, connect wirelessly to a central base station to provide comprehensive home safety.

പ്രധാന സവിശേഷതകൾ:

• വയർലെസ് കണക്റ്റിവിറ്റി: Communicates with the SBS50A Base Station over a long-range wireless protocol, up to 500 meters (1640 feet) in open air.
• ബാറ്ററി പവർ: Uses 2 AAA batteries with an estimated lifespan of up to 5 years.
• കോംപാക്റ്റ് ഡിസൈൻ: Measures 66 x 36 x 66 mm (2.6 x 1.4 x 2.6 inches), allowing for discreet placement.
• ഫ്ലെക്സിബിൾ മൗണ്ടിംഗ്: Supports both wall and corner mounting using adhesive tape or screws.
• ആപ്പ് നിയന്ത്രണം: Manage settings, receive notifications, and arm/disarm your system via the X-Sense Home Security App.
• സിസ്റ്റം വിപുലീകരണം: Each SBS50A Base Station can support up to 50 PIR (Passive Infrared) sensors.
• പ്രവർത്തന താപനില: Functions reliably in temperatures ranging from 0°C to 40°C (32°F to 104°F).

5. സജ്ജീകരണം

5.1 മുൻവ്യവസ്ഥകൾ

• An X-Sense SBS50A Base Station (sold separately) must be set up and connected to your home Wi-Fi network.
• The X-Sense Home Security App must be installed on your smartphone and linked to your SBS50A Base Station.

5.2 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The motion detectors come with 2 AAA batteries. If not pre-installed, open the battery compartment on the back of the detector and insert the batteries, ensuring correct polarity (+/-). Close the compartment securely.

5.3 Pairing with the Base Station

1. Ensure your SBS50A Base Station is powered on and connected to the X-Sense App.
2. Open the X-Sense Home Security App and navigate to the device pairing section.
3. On the SMS0A Motion Detector, locate the pairing button (refer to the device diagram in the app or manual for exact location).
4. Press and hold the pairing button until the indicator light on the detector starts to flash, indicating it is in pairing mode.
5. Follow the on-screen instructions in the X-Sense App to complete the pairing process. The app will confirm when the detector is successfully added to your system.

5.4 Mounting the Motion Detector

The SMS0A Motion Detector can be mounted on a flat wall or in a corner. Choose a location that provides optimal coverage for the area you wish to monitor, such as hallways, basements, stairwells, or entry points. Avoid placing it near heat sources, direct sunlight, or areas with strong air currents that could cause false alarms.

ചിത്രം: An X-Sense motion detector shown mounted in the corner of a room, illustrating its compact design and flexible installation options for both flat walls and corners.

മതിൽ മൗണ്ടിംഗ്:

1. Clean the desired wall surface to ensure it is dry and free of dust.
2. Peel off the protective film from the adhesive tape on the back of the detector.
3. Firmly press the detector onto the wall at the chosen height and hold for 30 seconds.
4. For a more secure installation, use the provided screws and wall plugs. Mark the drill holes, drill, insert plugs, and then screw the detector into place.

കോർണർ മൗണ്ടിംഗ്:

1. Clean both corner surfaces where the detector will be placed.
2. Peel off the protective film from the adhesive tape on the side of the detector.
3. Align the detector in the corner and firmly press it against both surfaces, holding for 30 seconds.
4. Alternatively, use screws and wall plugs for a permanent installation.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The X-Sense SMS0A Motion Detector operates in conjunction with your SBS50A Base Station and the X-Sense Home Security App.

6.1 X-Sense Home Security App Control

The app provides comprehensive control and monitoring capabilities for your security system.

ചിത്രം: A smartphone screen displaying the X-Sense Home Security App, illustrating the various security modes available for selection, such as Disarm, Home, and Away.

• ആയുധം/നിരായുധീകരണം: Easily switch between 'Home', 'Away', and 'Disarm' modes directly from the app. You can also set up automatic schedules for these modes.
• തത്സമയ നിരീക്ഷണം: View the status of your motion detectors and other connected devices.
• ഇവന്റ് ചരിത്രം: Access a log of all detected movements and system events.

6.2 അറിയിപ്പുകൾ

When motion is detected by an SMS0A sensor while the system is armed, the SBS50A Base Station will trigger an alarm (if configured) and send instant push notifications to your smartphone.

ചിത്രം: A smartphone displaying a push notification alert from the X-Sense security system, indicating that a sensor has detected an event, such as an opening door or window.

6.3 പങ്കിടൽ ആക്സസ്

You can share access to your X-Sense security system with family members through the app, allowing them to receive notifications and control the system as well.

7. പരിപാലനം

7.1 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The SMS0A Motion Detector uses 2 AAA batteries. The X-Sense App will notify you when the battery level is low. To replace the batteries:

1. Carefully remove the detector from its mounting location.
2. പിന്നിലെ ബാറ്ററി കമ്പാർട്ട്മെന്റ് തുറക്കുക.
3. പഴയ AAA ബാറ്ററികൾ നീക്കം ചെയ്ത് പുതിയവ ഇടുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക.
4. Close the battery compartment and re-mount the detector.
5. പ്രാദേശിക പരിസ്ഥിതി നിയന്ത്രണങ്ങൾ അനുസരിച്ച് പഴയ ബാറ്ററികൾ നശിപ്പിക്കുക.

7.2 വൃത്തിയാക്കൽ

To ensure optimal performance, periodically clean the exterior of the motion detector. Use a soft, dry cloth to wipe away dust and dirt. ചെയ്യരുത് ലിക്വിഡ് ക്ലീനർ അല്ലെങ്കിൽ ഉരച്ചിലുകൾ ഉപയോഗിക്കുക.

8. പ്രശ്‌നപരിഹാരം

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറണ്ടിയും പിന്തുണയും

X-Sense provides a limited warranty for this product. For detailed warranty information, technical support, or customer service inquiries, please refer to the official X-Sense website or contact their customer support team directly. Please have your product model number (SMS0A) and purchase information ready when contacting support.

Webസൈറ്റ്: www.x-sense.com