Qidoe 83W PD USB C Car Charger (Model: QD1009)

1. ആമുഖവും ഉൽപ്പന്നവും കഴിഞ്ഞുview

Thank you for choosing the Qidoe 83W PD USB C Car Charger. This device is designed to provide efficient and versatile charging solutions for your electronic devices in a vehicle environment. Featuring a 65W Power Delivery (PD) USB-C port and an 18W Quick Charge 3.0 (QC3.0) USB-A port, it offers a combined output of up to 83W. The charger is compatible with 12V/24V vehicle power systems and includes an intuitive LED digital display for monitoring voltage and current, along with a physical on/off switch and a dustproof flip cover for enhanced durability.

ചിത്രം 1.1: The Qidoe 83W PD USB C Car Charger in use, demonstrating its dual charging capabilities for a MacBook and an iPhone.

ചിത്രം 1.2: വിശദമായി view of the charger's components, including the ports, digital display, and control switch.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This charger is designed for surface mounting, requiring minimal modification to your vehicle's interior. Follow these steps for proper installation:

1. മൗണ്ടിംഗ് ഉപരിതലം തയ്യാറാക്കുക: Choose a flat, stable surface in your vehicle for installation.
2. കവർ തുറക്കുക: Carefully open the outer frame/cover of the charger unit.
3. Drill Wiring Holes: Drill a small hole (approximately 1.8 cm in diameter, refer to dimensions in Section 5) through the chosen mounting surface to pass the power cables. Ensure the hole is only large enough for the wires, not the entire unit.
4. വയറിംഗ് ബന്ധിപ്പിക്കുക:
   • ബന്ധിപ്പിക്കുക ചുവന്ന വയർ to the positive (+) terminal of your vehicle's 12V/24V power source.
   • ബന്ധിപ്പിക്കുക കറുത്ത വയർ to the negative (-) terminal or a suitable ground point.

   പ്രധാനപ്പെട്ടത്: Ensure correct polarity to prevent damage to the charger and your vehicle's electrical system. It is recommended to connect through a fuse (not included) for safety.
5. യൂണിറ്റ് സുരക്ഷിതമാക്കുക: Place the main body of the charger onto the mounting surface, aligning the wiring through the drilled hole. Use the provided screws to firmly fix the unit to the surface.
6. കവർ അടയ്ക്കുക: Reattach the outer frame/cover to the main unit. Ensure it snaps securely into place.

ചിത്രം 2.1: Step-by-step guide for surface mount installation.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 പവർ ഓൺ/ഓഫ്

• The charger features a physical ON/OFF pressure switch. Press the switch to toggle the power to the USB ports and the digital display.
• When the charger is powered on, the LED digital display will illuminate.

ചിത്രം 3.1: Demonstrating the ON/OFF function of the charger.

3.2 Using the Charging Ports

• USB-C (PD 65W) Port: Connect your USB-C compatible laptops, tablets, or smartphones to this port for fast charging. The 65W PD3.0 port can boost voltage to 15V and 20V for optimal charging of larger devices.
• USB-A (QC3.0 18W) Port: Connect your Quick Charge 3.0 compatible devices or standard USB devices to this port for efficient charging.
• You can charge two devices simultaneously using both ports.

3.3 Digital Display Functionality

• ബാറ്ററി വോളിയംtagഇ നിരീക്ഷണം: In standby mode or when only the USB-A port is in use, the display shows the vehicle's battery voltage (V), allowing you to monitor its health.
• Real-time Charging Data: When a device is connected to the 65W USB-C port, the display automatically switches to show the real-time output voltage (V) and current (A) for the PD interface, providing immediate feedback on charging performance.

ചിത്രം 3.2: The digital display showing vehicle battery voltage and real-time charging output for various devices.

4. പരിപാലനം

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the surface of the charger. Avoid using abrasive cleaners or solvents.
• പൊടി പ്രൂഫ് കവർ: Keep the flip cover closed when the ports are not in use to protect them from dust and moisture.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: While designed for automotive use, avoid exposing the charger to extreme water or harsh weather conditions.
• കേബിൾ പരിശോധന: Periodically check charging cables for any signs of wear or damage. Replace damaged cables immediately.

5. പ്രശ്‌നപരിഹാരം

• ചാർജർ ഓണാക്കുന്നില്ല:
  • Ensure the vehicle's ignition is on (if required by your vehicle's wiring).
  • Check the ON/OFF switch to ensure it is pressed to the 'ON' position.
  • Verify that the red and black wires are correctly connected to the positive and negative terminals, respectively.
  • Check the vehicle's fuse for the circuit the charger is connected to. Replace if blown.
• ഉപകരണം ചാർജ് ചെയ്യുന്നില്ല / വേഗത കുറഞ്ഞ ചാർജിംഗ്:
  • Ensure the charging cable is securely connected to both the charger and your device.
  • കേബിൾ പ്രശ്നങ്ങൾ ഒഴിവാക്കാൻ മറ്റൊരു ചാർജിംഗ് കേബിൾ പരീക്ഷിക്കുക.
  • Confirm your device supports PD (for USB-C) or QC3.0 (for USB-A) for fast charging.
  • If charging multiple devices, note that total power output is shared.
  • Check the digital display for output voltage and current. If values are unexpectedly low, there might be an issue with the power source or the device being charged.
• കൃത്യമല്ലാത്ത വാല്യംtagഇ ഡിസ്പ്ലേ:
  • Ensure the charger is properly connected to a stable 12V/24V power source.
  • Fluctuations in vehicle battery voltage are normal, especially during engine start-up or heavy electrical load.

6 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 6.1: Physical dimensions of the Qidoe 83W PD USB C Car Charger.

7. വാറൻ്റിയും പിന്തുണയും

The Qidoe 83W PD USB C Car Charger comes with a ഒരു വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി.

For any questions, technical assistance, or warranty claims, please contact Qidoe customer service directly via email. Our support team is committed to providing a satisfactory resolution as quickly as possible.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please refer to the contact details provided on the product packaging or the official Qidoe webഏറ്റവും കാലികമായ പിന്തുണാ വിവരങ്ങൾക്കായി സൈറ്റ്.

8. വാഹന അനുയോജ്യത

This charger is designed to be compatible with a wide range of 12V-24V vehicles, including:

• കാറുകൾ
• വാനുകൾ
• മോട്ടോർഹോമുകൾ
• ട്രക്കുകൾ
• ബസുകൾ
• ബോട്ടുകൾ
• മോട്ടോർസൈക്കിളുകൾ

ചിത്രം 8.1: Examples of compatible vehicles for the Qidoe car charger.