Lepro SW1 AI Smart Outdoor LED Strip Lights (32.8ft)

ആമുഖം

This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.

ബോക്സിൽ എന്താണുള്ളത്

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

• 1 x 32.8 അടി LED സ്ട്രിപ്പ് ലൈറ്റ്
• 1 x 9.84ft Cable with Controller
• 1 x Wall Adapter (36V 24W)
• 12 x മൗണ്ടിംഗ് ക്ലിപ്പുകൾ
• 12 x Screws for Mounting
• 12 x Anchors for Mounting
• 4 x Cable Clips for Securing Power Supply & Controller
• 4 x Screws for Securing Power Supply & Controller
• 4 x Anchors for Securing Power Supply & Controller
• 1 x ഉപയോക്തൃ മാനുവൽ

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

• This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
• The power supply (adapter) is അല്ല rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
• Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
• Ensure the installation surface is dry and clean before attaching the strip lights.
• Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
• പ്രവർത്തന താപനില പരിധി: -20°C മുതൽ 40°C വരെ (-4°F മുതൽ 104°F വരെ).

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation and initial setup of your LED strip lights.

1. ലൈറ്റുകൾ പരീക്ഷിക്കുക: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
2. ഉപരിതലം തയ്യാറാക്കുക: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
3. Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
4. Secure the Controller: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
5. LED സ്ട്രിപ്പ് ഘടിപ്പിക്കുക: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
6. ക്ലിപ്പുകൾ ഉപയോഗിച്ച് സുരക്ഷിതമാക്കുക: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.

ആപ്പ് കണക്ഷൻ

The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux" or "Smart Life" apps.

1. ലെപ്രോ ആപ്പ് ഡൗൺലോഡ് ചെയ്യുക: ഇതിനായി തിരയുക "Lepro" in your device's app store and download the official application.
2. ഒരു അക്കൗണ്ട് രജിസ്റ്റർ ചെയ്യുക: Open the app and follow the prompts to register a new user account.
3. Enable Bluetooth and Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
4. ലൈറ്റുകൾ സജീവമാക്കുക: Plug in the strip lights to activate them.
5. ഉപകരണം ചേർക്കുക: In the Lepro app, navigate to the homepage and click "Add Device".
6. Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
7. Pair with Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
8. പൂർത്തീകരണം: Once paired, the lights are ready for control via the app.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

App Control (Lepro App)

The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.

• Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
• ട്യൂണബിൾ വൈറ്റ്: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
• ലൈറ്റ്ജിപിഎം 4 - വ്യക്തിഗതമാക്കിയ AI ലൈറ്റിംഗ് ഡിസൈനർ: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
• Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
• LightBeats Music Sync: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.

ശബ്ദ നിയന്ത്രണം

The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.

• Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
• ഹബ് ആവശ്യമില്ല: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.

മെയിൻ്റനൻസ്

Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.

• വൃത്തിയാക്കൽ: Periodically wipe the strip lights with a soft, damp അഴുക്കും അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാനുള്ള തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
• സുരക്ഷിത മൗണ്ടിംഗ്: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
• കാലാവസ്ഥ പ്രതിരോധം: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a 2 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി.

For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.

നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും ആമസോണിലെ ലെപ്രോ സ്റ്റോർ കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കും.