LIORQUE YGH6208

LIORQUE Wireless Weather Station YGH6208 User Manual

Model: YGH6208

ആമുഖം

Thank you for choosing the LIORQUE Wireless Weather Station YGH6208. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, and features a DCF radio-controlled clock with alarm functions. This manual will guide you through the setup, operation, and maintenance of your weather station.

പാക്കേജ് ഉള്ളടക്കം

  • 1 x LIORQUE Wireless Weather Station (Main Unit)
  • 1 x doട്ട്ഡോർ സെൻസർ
  • 3 x AAA Batteries (for Main Unit)
  • 2 x AAA Batteries (for Outdoor Sensor)
  • 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ഉൽപ്പന്നം കഴിഞ്ഞുview

LIORQUE Wireless Weather Station Main Unit

ചിത്രം 1: LIORQUE Wireless Weather Station Main Unit. This image shows the front view of the main display unit, highlighting its LCD screen and compact design.

പ്രധാന യൂണിറ്റ് സവിശേഷതകൾ:

  • 4.3-inch LCD screen with backlight
  • ഇൻഡോർ താപനിലയും ഈർപ്പവും ഡിസ്പ്ലേ
  • പുറത്തെ താപനിലയും ഈർപ്പവും കാണിക്കുന്ന ഡിസ്പ്ലേ
  • കാലാവസ്ഥാ പ്രവചന ഐക്കണുകൾ
  • DCF radio-controlled clock with manual setting option
  • Double alarm clock with snooze function
  • Calendar and day of the week display (7 languages)
  • Max/Min temperature and humidity records
  • Air pressure display and weather trend
  • 12/24 മണിക്കൂർ സമയ പ്രദർശനം

Outdoor Sensor Features:

  • Wireless transmission up to 100m (open area)
  • താപനിലയും ഈർപ്പവും അളക്കൽ
  • Supports hanging or standing placement
  • Data updated every 30 seconds
  • Supports up to 3 sensors (one included)

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. ഔട്ട്‌ഡോർ സെൻസർ: Open the battery compartment cover on the back of the outdoor sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
  2. പ്രധാന യൂണിറ്റ്: Open the battery compartment cover on the back of the main unit. Insert 3 x AAA batteries, ensuring correct polarity (+/-). Close the cover.
  3. The main unit will power on and display indoor readings.

2. സെൻസർ ജോടിയാക്കൽ

After installing batteries in both units, the main unit will automatically search for the outdoor sensor. The outdoor temperature and humidity should appear on the main unit's display within a few minutes. If the outdoor readings do not appear:

  • Ensure both units are within range (up to 100m in open air).
  • Press the "TX" button inside the outdoor sensor's battery compartment to manually send a signal.
  • On the main unit, press and hold the "CHANNEL" button to initiate a manual search for the sensor.

3. Initial Settings (Time, Date, Units)

The weather station will attempt to synchronize with the DCF radio signal for automatic time setting. This may take several hours, especially in areas with weak signals. You can manually set the time and date if needed.

  • മാനുവൽ സമയ ക്രമീകരണം: Press and hold the "MODE" button to enter time setting mode. Use the "UP" and "DOWN" buttons to adjust values and "MODE" to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day, language for day of week).
  • താപനില യൂണിറ്റുകൾ: Press the "°C/°F" button to switch between Celsius and Fahrenheit.
  • Air Pressure Units: Press the "BARO" button to cycle through air pressure units (e.g., hPa, inHg).

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

വിവരങ്ങൾ പ്രദർശിപ്പിക്കുക

The 4.3-inch LCD screen displays various information:

  • സമയവും തീയതിയും: Current time, date, and day of the week.
  • Indoor Readings: Current indoor temperature and humidity.
  • Outdoor Readings: Current outdoor temperature and humidity from the connected sensor.
  • കാലാവസ്ഥാ പ്രവചനം: Icons indicating predicted weather conditions (e.g., sunny, cloudy, rainy).
  • വായു മർദ്ദം: Current atmospheric pressure and trend.
  • ബാക്ക്ലൈറ്റ്: The screen backlight activates with a light touch and returns to normal brightness after 10 seconds to conserve battery.

അലാറം ക്ലോക്ക് പ്രവർത്തനം

The weather station features a double alarm clock with snooze.

  • അലാറങ്ങൾ സജ്ജീകരിക്കുക: Press the "ALARM" button to view Alarm 1. Press "ALARM" again to view Alarm 2. Hold "ALARM" to enter alarm setting mode. Use "UP" and "DOWN" to adjust the hour and minute, and "ALARM" to confirm.
  • അലാറങ്ങൾ സജീവമാക്കൽ/നിർജ്ജീവമാക്കൽ: അതേസമയം viewing an alarm, press "UP" to toggle it on or off. An alarm icon will appear when active.
  • സ്‌നൂസ് പ്രവർത്തനം: When an alarm sounds, press any button (except "ALARM OFF") to activate snooze. The alarm will sound again after a set interval. Press "ALARM OFF" to stop the alarm completely.

പരമാവധി, കുറഞ്ഞ റെക്കോർഡുകൾ

The weather station records the maximum and minimum indoor/outdoor temperature and humidity values.

  • Press the "MAX/MIN" button once to display maximum recorded values.
  • Press "MAX/MIN" again to display minimum recorded values.
  • Press "MAX/MIN" a third time to return to current readings.
  • To clear records, hold the "MAX/MIN" button while viewരേഖകൾ ഉൾക്കൊള്ളുന്നു.

മെയിൻ്റനൻസ്

  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time.
  • വൃത്തിയാക്കൽ: Clean the display and unit surfaces with a soft, damp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
  • Sട്ട്ഡോർ സെൻസർ പ്ലേസ്മെന്റ്: For optimal performance and longevity, install the outdoor sensor in a shaded area, protected from direct sunlight and rain. Ensure it is within the 100m wireless range of the main unit.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ പരിഹാരം
No outdoor temperature/humidity display.
  • Check if batteries are correctly installed in the outdoor sensor.
  • Press the "TX" button on the outdoor sensor.
  • Press and hold the "CHANNEL" button on the main unit to re-establish connection.
  • Ensure the sensor is within range and not blocked by thick walls or metal objects.
തെറ്റായ സമയ പ്രദർശനം.
  • Wait for DCF signal synchronization (can take several hours).
  • Manually set the time (refer to "Initial Settings" section).
  • Ensure the main unit is not near sources of interference (e.g., TVs, computers).
ഡിസ്പ്ലേ മങ്ങിയതോ ശൂന്യമോ ആണ്.
  • Replace batteries in the main unit.
  • ശരിയായ പോളാരിറ്റിയോടെ ബാറ്ററികൾ ചേർത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
കാലാവസ്ഥാ പ്രവചനം തെറ്റാണെന്ന് തോന്നുന്നു.
  • The weather forecast is based on atmospheric pressure changes and is an estimation. It may not always match local weather services.
  • Allow 7-14 days for the station to learn local pressure patterns for more accurate forecasts.

സ്പെസിഫിക്കേഷനുകൾ

  • മോഡൽ: YGH6208
  • ബ്രാൻഡ്: ലിയോർക്ക്
  • ഡിസ്പ്ലേ തരം: എൽസിഡി
  • പവർ സോഴ്‌സ് (പ്രധാന യൂണിറ്റ്): 3 x AAA ബാറ്ററികൾ (ഉൾപ്പെട്ടിരിക്കുന്നു)
  • പവർ സ്രോതസ്സ് (ഔട്ട്ഡോർ സെൻസർ): 2 x AAA ബാറ്ററികൾ (ഉൾപ്പെട്ടിരിക്കുന്നു)
  • വയർലെസ് ശ്രേണി: 100 മീറ്റർ വരെ (തുറന്ന പ്രദേശം)
  • താപനില കൃത്യത: ±0.5 °C
  • സെൻസർ ടെക്നോളജി: Funk (Wireless)
  • പ്രത്യേക സവിശേഷതകൾ: DCF Radio Clock, Alarm, Snooze, Weather Forecast, Max/Min Records, Backlight
  • ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Weather Station Main Unit, Outdoor Sensor

വാറൻ്റിയും പിന്തുണയും

LIORQUE products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LIORQUE webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.