Zooz Z-Wave Long Range Low Voltage XS Relay ZEN58 800LR User Manual

ആമുഖം

The Zooz ZEN58 800LR is a compact Z-Wave Long Range Low Voltage XS Relay designed to integrate low-voltage devices into your Z-Wave smart home system. It enables ON/OFF control for loads up to 3 Amps and supports 0-240 Volts, making it suitable for applications such as garage doors, entry gates, or controlling humidifiers. This manual provides detailed instructions for safe installation, operation, and maintenance of your ZEN58 800LR relay.

സുരക്ഷാ വിവരങ്ങൾ

Please read all safety precautions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or property damage.

• ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.
• ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ സർവീസ് ചെയ്യുന്നതിന് മുമ്പ് സർക്യൂട്ട് ബ്രേക്കറിൽ വൈദ്യുതി വിച്ഛേദിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Installation should be performed by a qualified electrician or trained professional.
• പരമാവധി ലോഡ് 3 കവിയരുത് Amp240V-ൽ.
• The device is powered by 9-40 V AC/DC only.
• Use dry contact input (NO Voltage) for connected switches or sensors.
• Maximum wire size for terminals is 14 AWG.
• Do not use with dimmers or electronic switches; only simple toggle and momentary switches are supported for analog input.

ഉൽപ്പന്നം കഴിഞ്ഞുview

ബോക്സിൽ എന്താണുള്ളത്

• Zooz ZEN58 800LR Smart Relay
• ഉപയോക്തൃ മാനുവൽ

പ്രധാന സവിശേഷതകൾ

• Z-വേവ് നിയന്ത്രണം: Adds Z-Wave ON/OFF functionality to low-voltage loads up to 3 Amps, 0-240 Volts.
• അനലോഗ് ഇൻപുട്ട്: Connects to a wall switch (toggle or momentary) or binary sensors (e.g., open/close, water/no water) with no voltage on input wires.
• കോംപാക്റ്റ് ഡിസൈൻ: Extra small size (1.2" tall, 1.0" wide, 0.6" deep) for installation in crowded or shallow electrical boxes.
• വിപുലമായ സുരക്ഷ: Features S2 authenticated security protocol and SmartStart for secure and easy pairing.
• നീണ്ട ശ്രേണി: Z-Wave Long Range enabled for extended communication.
• വിശാലമായ അനുയോജ്യത: Works with various Z-Wave hubs including Z-Box Hub, Hubitat, Home Assistant (Z-Wave JS), and SmartThings (for basic on/off).

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

വയറിംഗ് നിർദ്ദേശങ്ങൾ

Before proceeding, ensure power is OFF at the circuit breaker. The ZEN58 800LR requires a 9-40V AC/DC power source and uses dry contact inputs. Do not apply voltage to the input (IN) terminals.

1. പവർ കണക്ഷൻ: Connect your 9-40V AC/DC power supply to the DC+ and DC- terminals on the relay. Observe polarity if using DC.
2. ലോഡ് കണക്ഷൻ: Connect the load you wish to control (e.g., garage door opener, solenoid valve) to the OUT terminals. This is a dry contact output, meaning it acts as a switch to complete or break a circuit for your load.
3. Analog Input (Optional): If connecting a wall switch or binary sensor, connect it to the IN and S terminals. Ensure the switch provides a dry contact closure (no voltage). This input supports simple toggle or momentary switches.
4. സുരക്ഷിത വയറിംഗ്: Ensure all wire connections are secure and within the maximum 14 AWG wire size.

ഫ്രണ്ട് view of the ZEN58 800LR relay, illustrating the terminal block for power input (DC+, DC-), dry contact output (OUT), and dry contact analog input (IN, S).

തിരികെ view of the ZEN58 800LR relay, displaying regulatory information, Z-Wave region, firmware version, and the SmartStart DSK (Device Specific Key) for secure pairing.

Size comparison of the ZEN58 800LR relay, highlighting its compact dimensions (1.0" wide, 1.2" tall) relative to a US quarter and another Zooz relay model, demonstrating its suitability for tight spaces.

Z-വേവ് ജോടിയാക്കൽ

The ZEN58 800LR supports S2 authenticated security and SmartStart for easy and secure inclusion into your Z-Wave network. A compatible Z-Wave hub is required (sold separately).

1. പവർ ഓൺ: After wiring, restore power to the circuit. The relay will power on.
2. SmartStart ഉൾപ്പെടുത്തൽ: If your Z-Wave hub supports SmartStart, scan the QR code on the back of the relay (or on the packaging) using your hub's app. The device will automatically include into your network.
3. സ്വമേധയാലുള്ള ഉൾപ്പെടുത്തൽ: If your hub does not support SmartStart, initiate "Add Device" or "Z-Wave Inclusion" mode on your Z-Wave hub. Then, quickly press the Z-Wave button on the ZEN58 800LR three times. The LED indicator will confirm successful pairing.
4. എസ് 2 സുരക്ഷ: During inclusion, your hub may prompt you to enter the 5-digit Device Specific Key (DSK) found on the QR code label for S2 authenticated security.

Compatible Z-Wave Hubs:

• Z-Box Hub (fully compatible)
• ആവാസ കേന്ദ്രം
• Home Assistant (Z-Wave JS)
• ഹോംസീർ
• SmartThings (for basic on/off functionality)

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once successfully paired with your Z-Wave hub, the ZEN58 800LR can be controlled remotely via your Z-Wave network or locally via the connected analog input.

• Z-വേവ് നിയന്ത്രണം: Use your Z-Wave hub's interface or associated smart home app to turn the connected load ON or OFF. The relay will respond to commands sent over the Z-Wave network.
• Analog Input Control: If a physical switch is connected to the IN and S terminals, operating this switch will toggle the state of the relay. For example, pressing a momentary switch connected to a garage door opener will activate the opener.
• സ്റ്റാറ്റസ് സൂചന: The LED indicator on the relay provides visual feedback on its status (e.g., pairing mode, ON/OFF state). Refer to your hub's documentation for specific LED behavior during pairing.

മെയിൻ്റനൻസ്

The Zooz ZEN58 800LR is designed for reliable, long-term operation with minimal maintenance.

• ഉപകരണം പൊടിയിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും മുക്തമായി സൂക്ഷിക്കുക.
• Do not attempt to open or repair the device yourself. Refer to qualified personnel for any service needs.
• Periodically check wire connections to ensure they remain secure.

ട്രബിൾഷൂട്ടിംഗ്

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും

• ഉപകരണം ജോടിയാക്കുന്നില്ല:
  • Ensure the device is powered correctly (9-40V AC/DC).
  • Verify your Z-Wave hub is in inclusion mode.
  • Try pressing the Z-Wave button on the relay 3 times quickly.
  • Move the relay closer to the hub during the pairing process.
  • Perform a Z-Wave exclusion first (see your hub's manual) and then try inclusion again.
• Relay not responding to commands:
  • Check the power supply to the relay.
  • Verify the Z-Wave network connection and signal strength.
  • Ensure the connected load is within the 3 Amp പരിധി.
  • Check the wiring to the load.
• Analog input switch not working:
  • Confirm the switch is a dry contact type (no voltagഇ ഔട്ട്പുട്ട്).
  • Ensure the switch is properly connected to the IN and S terminals.
  • Verify the switch type is toggle or momentary, not a dimmer or electronic switch.
• Poor Z-Wave Long Range performance:
  • Ensure your Z-Wave hub supports Z-Wave Long Range.
  • Minimize physical obstructions (concrete walls, large metal objects) between the relay and the hub.
  • Consider adding Z-Wave repeaters if range is consistently an issue.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

The Zooz ZEN58 800LR comes with a standard warranty. You can extend this to a 5 വർഷത്തെ വാറൻ്റി by registering your device within 30 days of purchase. Zooz also provides ആജീവനാന്ത സാങ്കേതിക പിന്തുണ അതിന്റെ ഉൽപ്പന്നങ്ങൾക്ക്.

For warranty registration, technical assistance, or further inquiries, please visit the official Zooz webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.