GODIYMODULES 3S 12V UPS Module

GODIYMODULES 3S 12V UPS Module Instruction Manual

3S 12V 3A 24W 36W Lithium Battery UPS Module

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The GODIYMODULES 3S 12V UPS Module is designed to provide an uninterruptible power supply for your devices. It automatically switches to battery power when the main power supply is interrupted, ensuring continuous operation. This module supports 3S lithium-ion or polymer battery packs and features integrated charging and discharging capabilities.

മുകളിൽ view of the GODIYMODULES 3S 12V UPS Module

ചിത്രം 1: മുകളിൽ view of the GODIYMODULES 3S 12V UPS Module, showing its compact design and various components.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Careful attention to the wiring and connection sequence is crucial for proper function and safety. Please follow these instructions precisely.

2.1 വയറിംഗ് ഡയഗ്രം

Wiring diagram for the 3S 12V UPS Module

Figure 2: Detailed wiring diagram illustrating input, output, battery, and indicator light connections.

2.2 Important Connection Notes

  • ബാറ്ററി കണക്ഷൻ: Always connect the battery as the last step during installation. This is critical for safe operation.
  • ബാറ്ററി തരം: This module is designed for 3S lithium-ion battery packs, polymer battery packs, or 18650 battery packs.
  • Default Battery Pack Configuration: The module can be connected to a battery pack using either 2 wires (positive and negative) or 4 wires. If using a 4-wire configuration, resistors R16, R17, and R18 on the board must be removed.
  • വയറിംഗ് ഗുണനിലവാരം: Use at least 20AWG wire for soldering input and output connections. The wire length should not exceed 10 cm. Ensure connecting wires are as thick and short as possible to minimize resistance and power loss.
  • ചൂട് മാനേജ്മെൻ്റ്: The control board generates heat during operation. Install the module at a sufficient distance from the battery to prevent heat transfer and ensure proper ventilation.
  • ഇൻഡിക്കേറ്റർ ലൈറ്റ്: To utilize the indicator light function, you will need to configure a 3mm common anode red/green light-emitting diode (LED) yourself. The red light indicates charging, and the green light indicates a fully charged battery.

3. ഓപ്പറേഷൻ

Once properly installed, the UPS module operates automatically. When the primary DC12V input power is present, the module will power the connected device and charge the battery (if connected and not full). If the primary power supply is interrupted, the module will seamlessly switch to drawing power from the connected 3S battery pack, maintaining continuous operation of your device.

The external indicator light (if configured) will provide visual feedback on the charging status:

  • റെഡ് ലൈറ്റ് ഓൺ: ബാറ്ററി നിലവിൽ ചാർജ് ചെയ്യുന്നു.
  • ഗ്രീൻ ലൈറ്റ് ഓൺ: ബാറ്ററി പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തു.

4 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
ഇൻപുട്ട് വോളിയംtageDC 12V
Putട്ട്പുട്ട് വോളിയംtageDC 12V (between 11V and 13V)
ഔട്ട്പുട്ട് കറൻ്റ്3 Amps
പരമാവധി ഔട്ട്പുട്ട് പവർ36 വാട്ട്സ്
ബാറ്ററി ചാർജിംഗ് കറന്റ്0.5 Ampസെ (മാക്സ്)
അളവുകൾ57.5 x 22 x 4 മിമി (ഏകദേശം)
ഭാരം0.02 കിലോഗ്രാം

5. പരിപാലനം

The GODIYMODULES 3S 12V UPS Module is designed for reliable operation and generally requires no routine maintenance. Ensure the module is kept clean and free from dust or moisture. Periodically inspect all wiring connections for security and integrity.

6. പ്രശ്‌നപരിഹാരം

  • Device not receiving power:
    • Check all input and output connections for proper wiring and secure contact.
    • Verify that the input DC12V power supply is active and providing the correct voltage.
    • Ensure the battery pack is correctly connected and charged.
  • ബാറ്ററി ചാർജ്ജുചെയ്യുന്നില്ല:
    • Confirm the input DC12V power supply is connected and functional.
    • ബാറ്ററി കണക്ഷനുകൾ പരിശോധിക്കുക.
    • If an external indicator light is used, ensure it is correctly configured.
  • മൊഡ്യൂൾ അമിത ചൂടാക്കൽ:
    • Ensure adequate ventilation around the module.
    • Verify that the module is installed at a sufficient distance from the battery or other heat sources.
    • Confirm that the load connected to the output does not exceed the maximum output power of 36W.

7. വാറൻ്റി വിവരങ്ങൾ

This GODIYMODULES product is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or service, please retain your proof of purchase.

The return policy allows for a refund or replacement within 30 days of purchase, subject to the seller's terms and conditions.

8. പിന്തുണാ വിവരങ്ങൾ

For technical assistance, troubleshooting, or further inquiries regarding your GODIYMODULES 3S 12V UPS Module, please contact your retailer or the manufacturer's support channels. Refer to your purchase documentation for specific contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.