FiiO EH11 Retro On-Ear Bluetooth Headphones User Manual

ആമുഖം

Welcome to your FiiO EH11 Retro On-Ear Bluetooth Headphones. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your device. Please read this guide thoroughly to ensure optimal performance and longevity of your headphones.

Image: FiiO EH11 Bluetooth Over-Ear Headphones, showcasing ഉൽപ്പന്ന രൂപകൽപ്പന.

ബോക്സിൽ എന്താണുള്ളത്

Upon unpacking your FiiO EH11 headphones, please verify that all the following items are included:

• Two pairs of foam earpads (one pre-installed, one spare)
• One USB-A to Type-C charging cable
• ഒരു ദ്രുത ആരംഭ ഗൈഡ്

ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും

The FiiO EH11 headphones combine retro aesthetics with modern audio technology, offering a unique listening experience.

Advanced Acoustic Engineering

Equipped with a custom low-frequency enhanced design, a 40mm long-stroke dynamic driver, and a high-damping composite diaphragm. The resonance frequency is reduced to 60Hz, with bass extension down to 17Hz for deep, impactful low-end performance. The semi-open back design balances sound openness with listening privacy.

ചിത്രം: വിശദമായത് view of the 40mm dynamic driver components and a frequency response graph illustrating bass extension.

LDAC High-Resolution Bluetooth Audio

Supports LDAC high-resolution Bluetooth codec with transmission rates up to 990kbps, approximately three times higher than standard SBC/AAC, delivering near-lossless wireless audio quality. To utilize this feature, your source device must support LDAC output. Using LDAC may result in marginally higher power draw. The format is enabled by default but can be deactivated via the FiiO Control App.

Image: Diagram illustrating LDAC high-resolution Bluetooth support and comparison of transmission rates with traditional codecs.

ഭാരം കുറഞ്ഞതും സൗകര്യപ്രദവുമായ ഡിസൈൻ

Weighing only about 92g with a low clamping force of just 1.7N, the EH11 ensures fatigue-free long listening sessions. Enjoy music with cloud-like comfort.

Image: FiiO EH11 headphones highlighting their lightweight design at approximately 92 grams.

നീണ്ടുനിൽക്കുന്ന ബാറ്ററി ലൈഫ്

A 1.5-hour charge provides up to 30 hours of playback, ideal for daily use and extended listening sessions.

Image: Visual representation of 2 hours charging time for 30 hours of battery life.

Customizable Sound Effects via FiiO Control App

Download the dedicated FiiO Control App to unlock multiple EQ presets such as Pop and Rock. A specially tuned gaming mode enhances footsteps and gunshot details, combined with a built-in HD microphone for accurate sound positioning and efficient team communication.

Image: Screenshot of the FiiO Control App interface showing options for custom audio profiles and EQ settings.

Dual-Device Bluetooth Connection

Supports simultaneous connection to two devices (such as a phone and a computer), allowing seamless switching between music, calls, gaming, and video without re-pairing.

Image: FiiO EH11 headphones shown connected to both a smartphone and a tablet, illustrating dual-device connectivity.

മാറ്റിസ്ഥാപിക്കാവുന്ന ഇയർ പാഡുകൾ

Detachable foam ear pads make cleaning and replacement easy. Two pairs of different-colored official ear pads are included, with more color options available to express personal style and individuality.

Image: Close-up of the FiiO EH11 ear pads, demonstrating their detachability for easy cleaning and replacement.

സജ്ജമാക്കുക

ഹെഡ്ഫോണുകൾ ചാർജ് ചെയ്യുന്നു

Before first use, fully charge your FiiO EH11 headphones. Connect the provided USB-A to Type-C charging cable to the charging port on the headphones and a compatible USB power source. A full charge takes approximately 1.5 hours and provides up to 30 hours of playback time.

ബ്ലൂടൂത്ത് ജോടിയാക്കൽ

1. പ്രാരംഭ ജോടിയാക്കൽ: When the headphones are powered off, press and hold the power button for 5 seconds until the indicator light flashes to enter a new pairing state.
2. Re-entering Pairing Mode: If the headphones are already powered on, press and hold the power button for 2 seconds to re-enter pairing mode.
3. ഉപകരണം ബന്ധിപ്പിക്കുക: On your device (smartphone, computer, etc.), enable Bluetooth and select "FiiO EH11" from the list of available devices.
4. Clear Paired Devices: To clear all previously paired devices, ensure the headphones are powered off, then press and hold the power button for 10 seconds.

The FiiO EH11 supports dual-device connection, allowing you to connect to two devices simultaneously and switch between them seamlessly.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Controls and Indicator Status Guide

Image: Diagram detailing button and knob controls, along with RGB indicator light statuses.

ബട്ടൺ നിയന്ത്രണങ്ങൾ

• പവർ ഓൺ: 2 സെക്കൻഡ് നേരത്തേക്ക് ബട്ടൺ അമർത്തിപ്പിടിക്കുക.
• പവർ ഓഫ്: 5 സെക്കൻഡ് നേരത്തേക്ക് ബട്ടൺ അമർത്തിപ്പിടിക്കുക.
• മറുപടി കോൾ: ഒറ്റ അമർത്തുക.
• ഹാംഗ് അപ്പ് കോൾ: 2 സെക്കൻഡ് അമർത്തിപ്പിടിക്കുക.
• കോൾ നിരസിക്കുക: 2 സെക്കൻഡ് അമർത്തിപ്പിടിക്കുക.
• സംഗീതം പ്ലേ ചെയ്യുക/താൽക്കാലികമായി നിർത്തുക: ഒറ്റ അമർത്തുക.
• വോയ്‌സ് അസിസ്റ്റന്റിനെ സജീവമാക്കുക: Double click button.

നോബ് നിയന്ത്രണങ്ങൾ

• ഇടത് നോബ്: Rotate counter-clockwise for previous track, clockwise for next track.
• വലത് നോബ്: Rotate clockwise to increase volume, counter-clockwise to decrease volume.

RGB Indicator Status

• ജോടിയാക്കൽ: Red and blue flashing.
• പൂർണ്ണമായി ചാർജ്ജ് ചെയ്‌തത്: കടും നീല.
• പവർ ഓൺ/ഓഫ്: White flashing.
• കുറഞ്ഞ ബാറ്ററി: ചുവന്ന മിന്നൽ.
• ചാർജിംഗ്: കടും ചുവപ്പ്.

FiiO നിയന്ത്രണ ആപ്പ്

Download the FiiO Control App from your device's app store to access advanced features, including:

• Multiple EQ presets (Pop, Rock, Jazz, Classical, etc.)
• Customizable sound profiles
• Activation of Gaming Mode for enhanced audio cues
• LDAC format activation/deactivation

ഗെയിമിംഗ് മോഡ്

The specially tuned gaming mode enhances specific audio details like footsteps and gunshots for an immersive gaming experience. This mode needs to be enabled and switched within the FiiO Control App.

Image: FiiO EH11 headphones in a gaming scenario, illustrating the enhanced sound effects.

മെയിൻ്റനൻസ്

Cleaning and Replacing Ear Pads

The foam ear pads of your FiiO EH11 headphones are detachable for easy cleaning and replacement. Gently pull the ear pads off the earcups to remove them. Clean with a soft, dry cloth. To reattach or replace, align the ear pad with the earcup and press firmly until it is securely in place. Ensure the ear pads are fully dry before reattaching.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues with your FiiO EH11 headphones, please refer to the following common solutions:

• ശക്തിയില്ല: Ensure the headphones are fully charged. Connect to a power source using the provided USB-C cable.
• ജോടിയാക്കാൻ കഴിയില്ല: Make sure the headphones are in pairing mode (indicator flashing red and blue or white). Ensure Bluetooth is enabled on your device and it is within range. Try clearing all paired devices on the headphones and re-pairing.
• ശബ്ദമില്ല: Check the volume levels on both the headphones and your connected device. Ensure the headphones are correctly paired and connected.
• മോശം ശബ്ദ നിലവാരം: Ensure there are no obstructions between the headphones and your device. If using LDAC, confirm your source device supports it and try switching to a different codec via the FiiO Control App if issues persist.
• നിയന്ത്രണങ്ങൾ പ്രതികരിക്കുന്നില്ല: Try restarting the headphones. If the issue persists, ensure the FiiO Control App is updated and functioning correctly.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Your FiiO EH11 Retro On-Ear Bluetooth Headphones come with a 1 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി. For warranty claims or technical support, please contact FiiO customer service.

Additionally, products purchased through Amazon are subject to a 30 ദിവസത്തെ റിട്ടേൺ പോളിസി. Please refer to Amazon's return policy for details.

For further information and resources, you may visit the ആമസോണിലെ FiiO സ്റ്റോർ.

ഉൽപ്പന്ന വീഡിയോ കഴിഞ്ഞുview