1. ആമുഖം
വാങ്ങിയതിന് നന്ദി.asing the Shark EVOPOWER SYSTEM FIT+ LC156JGY1 Cordless Stick Vacuum Cleaner. This lightweight and powerful vacuum is designed to fit your lifestyle, featuring an automatic dust collection dock, iQ sensor technology for optimized suction, and a brushless power fin to prevent hair tangles. This manual provides essential information for safe and effective use of your new appliance.

Image: The Shark EVOPOWER SYSTEM FIT+ LC156JGY1 cordless stick vacuum cleaner with its automatic dust collection dock.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read all instructions carefully before using your vacuum cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- ഈ ഉപകരണം ഗാർഹിക ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്.
- പുറത്തോ നനഞ്ഞ പ്രതലങ്ങളിലോ ഉപയോഗിക്കരുത്.
- മുടി, അയഞ്ഞ വസ്ത്രങ്ങൾ, വിരലുകൾ, ശരീരത്തിൻ്റെ എല്ലാ ഭാഗങ്ങളും തുറസ്സുകളിൽ നിന്നും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്നും അകറ്റി നിർത്തുക.
- കത്തുന്നതോ പുകവലിക്കുന്നതോ ആയ സിഗരറ്റ്, തീപ്പെട്ടി, ചൂടുള്ള ചാരം എന്നിവയൊന്നും എടുക്കരുത്.
- Do not use without dust cup and filters in place.
- ഈ മാനുവലിൽ വിവരിച്ചിരിക്കുന്നതുപോലെ മാത്രം ഉപയോഗിക്കുക.
- Always turn off the appliance before connecting or disconnecting the motorized nozzle, charging, or performing any maintenance.
- Store the vacuum in a dry indoor area.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- പ്രധാന വാക്വം യൂണിറ്റ്
- Automatic Dust Collection Dock (with charging function)
- Lithium-ion Battery (1, pre-installed in main unit)
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
4. അസംബ്ലിയും സജ്ജീകരണവും
Follow these steps to assemble your vacuum cleaner and prepare it for first use:
- ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഭാഗങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
- പ്രധാന യൂണിറ്റ് കൂട്ടിച്ചേർക്കുക: Connect the wand to the floor nozzle until it clicks into place. Then, connect the handheld vacuum to the top of the wand until it clicks.
- Set up the Automatic Dust Collection Dock: Place the dock on a flat, stable surface near a power outlet.
- ബാറ്ററി ചാർജ് ചെയ്യുക: Place the assembled vacuum cleaner onto the automatic dust collection dock. Ensure the charging contacts align. The battery will begin charging automatically. A full charge takes approximately 3.5 hours.

Image: The Shark EVOPOWER SYSTEM FIT+ LC156JGY1 vacuum cleaner in its assembled state.
5. ഓപ്പറേഷൻ
5.1. ആരംഭിക്കുന്നതും നിർത്തുന്നതും
- To start the vacuum, press the power button on the handheld unit.
- To stop, press the power button again.
5.2. ക്ലീനിംഗ് മോഡുകൾ
Your vacuum features two cleaning modes:
- iQ Mode: This is the standard mode. The Shark iQ sensor automatically adjusts suction power based on the amount of debris detected, optimizing cleaning efficiency and battery life.
- ബൂസ്റ്റ് മോഡ്: For stubborn dirt and deep cleaning, press the Boost button on the handheld unit to activate maximum suction power.

Image: The iQ sensor automatically adjusts suction power based on debris levels.
5.3. Handheld Conversion
To convert to a handheld vacuum for cleaning furniture, stairs, or tight spaces:
- Press the release button on the handheld unit.
- Pull the handheld unit away from the wand.
- Attach any desired accessories (not included with this model, but available separately) to the handheld unit.

Image: Converting the stick vacuum to a handheld unit for versatile cleaning.
5.4. Automatic Dust Collection Dock
When you return the vacuum to its dock, the automatic dust collection feature will activate, transferring debris from the vacuum's dust cup to the dock's larger collection bin. This minimizes contact with dust and reduces the frequency of emptying the vacuum's small dust cup.
- The dock can hold approximately 30 days' worth of debris (based on 1 use per day; actual capacity may vary depending on environment).
- To temporarily stop the automatic dust collection process (e.g., at night), press the dedicated button on the dock.

Image: The automatic dust collection dock for convenient and hygienic debris disposal.

Image: Comparison of traditional dust emptying (dust flying) versus Shark's automatic, dust-free collection.
6. പരിപാലനം
പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ വാക്വം ക്ലീനറിന്റെ മികച്ച പ്രകടനം ഉറപ്പാക്കുന്നു.
6.1. Emptying the Dust Collection Dock
- When the dust collection bin on the dock is full, remove it and empty the contents into a trash can.
- The dock's dust box is washable. Rinse with water and allow to air dry completely before reinserting.
6.2. ക്ലീനിംഗ് ഫിൽട്ടറുകൾ
The vacuum's dust cup and filters are washable:
- Remove the dust cup and filters from the handheld unit.
- Rinse the dust cup and filters with cold water.
- Allow all parts to air dry completely for at least 24 hours before reassembling. Do not use a hairdryer or other heating methods.

Image: The HEPA filter ensures clean exhaust, trapping fine dust and allergens.

Image: Washable components including the brush roll, dust cup, and filters for easy maintenance.
6.3. ബ്രഷ് റോൾ വൃത്തിയാക്കൽ
The brushless power fin design minimizes hair tangles. If any debris accumulates:
- Turn off the vacuum and disconnect it from the dock.
- Open the brush roll garage on the floor nozzle.
- Remove any tangled hair or debris from the brush roll.
- The brush roll can be rinsed with water. Ensure it is completely dry before reinserting.

Image: The brushless power fin effectively captures debris without tangling hair.
7. പ്രശ്നപരിഹാരം
നിങ്ങൾക്ക് എന്തെങ്കിലും പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ് പരിശോധിക്കുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| വാക്വം ഓണാക്കുന്നില്ല | ബാറ്ററി ചാർജ് ചെയ്തിട്ടില്ല അല്ലെങ്കിൽ ശരിയായി ചേർത്തിട്ടില്ല. | Ensure battery is fully charged and correctly inserted into the handheld unit. |
| വലിച്ചെടുക്കൽ നഷ്ടം | Dust cup full, filters clogged, or blockage in nozzle/wand. | Empty dust cup, clean filters, and check for blockages. |
| Automatic dust collection not working | Dock's dust bin full, or vacuum not properly seated on dock. | Empty the dock's dust bin. Ensure the vacuum is correctly placed on the dock. Check if the automatic collection stop button is activated. |
| ബ്രഷ് റോൾ കറങ്ങുന്നില്ല | Blockage in brush roll or brush roll garage. | Turn off the vacuum, remove any obstructions from the brush roll area. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | LC156JGY1 |
| നിറം | Lucent Gray |
| Dimensions (Stick Mode) | 104.1 cm (H) x 26.7 cm (W) x 15.2 cm (D) |
| Weight (Stick Mode) | ഏകദേശം 1.8 കിലോ |
| ബാറ്ററി തരം | ലിഥിയം-അയൺ |
| ചാർജിംഗ് സമയം | ഏകദേശം 3.5 മണിക്കൂർ |
| Operating Time (Stick Mode) | iQ Mode: Approx. 8-30 minutes Boost Mode: Approx. 8 minutes |
| Operating Time (Handheld Mode) | iQ Mode: Approx. 9-40 minutes Boost Mode: Approx. 9 minutes |
| Dust Collection Dock Capacity | Approx. 30 days of debris (varies by usage) |
| നിർമ്മാതാവിൻ്റെ വാറൻ്റി | 2 വർഷം |
9. വാറൻ്റിയും പിന്തുണയും
9.1. നിർമ്മാതാവിന്റെ വാറന്റി
This Shark EVOPOWER SYSTEM FIT+ LC156JGY1 vacuum cleaner comes with a 2 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഗാർഹിക ഉപയോഗത്തിൽ മെറ്റീരിയലുകളിലും ജോലികളിലും ഉണ്ടാകുന്ന തകരാറുകൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
9.2. ഉപഭോക്തൃ പിന്തുണ
For product support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact Shark customer service. Refer to the contact information provided on the official Shark webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗ്.
You can also visit the official Shark store on Amazon for additional information and accessories: Shark Official Store