📘 HCS manuals • Free online PDFs
HCS logo

HCS Manuals & User Guides

Manufacturer of remote controls and input devices for consumer electronics and set-top boxes.

Tip: include the full model number printed on your HCS label for the best match.

About HCS manuals on Manuals.plus

എച്ച്സിഎസ് (HCS Suzhou Limited) specializes in the design and manufacturing of remote control units for the consumer electronics market. As a key OEM/ODM provider, HCS supplies remote command devices for various set-top boxes, smart TVs, and streaming media players globally.

Their product range includes advanced Bluetooth (BLE) and Infrared (IR) remotes, often featuring voice control capabilities and universal programming protocols such as NEC. While primarily a manufacturer for other service providers (often manufactured under the Omni Remotes umbrella), HCS remotes are found in many households accompanying cable and streaming hardware.

HCS manuals

ഏറ്റവും പുതിയ മാനുവലുകൾ manuals+ ഈ ബ്രാൻഡിനായി ക്യൂറേറ്റ് ചെയ്‌തിരിക്കുന്നു.

HCS TRX2001 സെന്റിനൽ ഷീൽഡ് നിർദ്ദേശങ്ങൾ

28 മാർച്ച് 2022
HCS TRX2001 സെന്റിനൽ ഷീൽഡ് ഓവർVIEW ഏറ്റവും ഉയർന്ന നിർദ്ദിഷ്‌ട ചാർജിംഗ് താപനില: 45℃കുറഞ്ഞ നിർദ്ദിഷ്‌ട ചാർജിംഗ് താപനില: 0℃പരമാവധി നിർദ്ദിഷ്‌ട ചാർജിംഗ് കറന്റ്: 400mA പരമാവധി നിർദ്ദിഷ്‌ട ചാർജിംഗ് വോള്യംtage: 4.2V Highest specified charging temperature: 45℃Lowest specified charging…

HCS support FAQ

ഈ ബ്രാൻഡിനായുള്ള മാനുവലുകൾ, രജിസ്ട്രേഷൻ, പിന്തുണ എന്നിവയെക്കുറിച്ചുള്ള പതിവ് ചോദ്യങ്ങൾ.

  • How do I pair my HCS remote control?

    Most HCS Bluetooth remotes can be paired by pressing and holding a specific key combination, such as 'Menu + OK' or 'Home + Back', for 3 seconds until the LED indicator blinks. Refer to your specific model's manual for the exact combination.

  • What batteries do HCS remotes typically use?

    The majority of HCS remote control models require 2x AAA batteries. Always check the battery compartment diagram for correct polarity.

  • Why is the LED on my HCS remote blinking red?

    A red blinking LED often indicates that the batteries are low and need replacement, or that the remote is in pairing mode but has not yet connected to the host device.