zen-control-logo

zen control DALI-2 Switch Module

zen-control-DALI-2-Switch-Module-product

ഉൽപ്പന്ന ശ്രേണി

  • ഓർഡർ കോഡ് വിവരണം
  • zc-സ്വിച്ച്-6 DALI-2 switch moduel, 6 input

സ്പെസിഫിക്കേഷനുകൾ

  • സപ്ലൈ വോളിയംtage 9.5 – 22.5 Vdc (Supplied from DALI)
  • നിയന്ത്രണ സംവിധാനം ഡാലി-2
  • നിലവിലെ വിതരണം 5 എം.എ
  • ഇൻപുട്ട്
    • 6 floating dry contacts
  • Note: Any switch used shall be LV rated Only supports momentary (non-latching) inputs.
  • വയറിംഗ് 0.5 - 1.5 mm2
    • സ്ട്രിപ്പ് 6 - 7 മി.മീ
  • പ്രവർത്തന താപനില 0 മുതൽ 60 ഡിഗ്രി സെൽഷ്യസ് വരെ
  • മെറ്റീരിയൽ PC
  • മൗണ്ടിംഗ് ഇൻബിൽറ്റ്
  • പ്രവേശന സംരക്ഷണം IP20
  • പാലിക്കൽ മാനദണ്ഡങ്ങൾ IEC 61347-2-11
    • CISPR 15
    • IEC 62386-301
    • EMC-2004/108/EC
    • LVD-2006/95/EC

അളവുകൾ

  • Mounting options Inbuilt
  • Dimensions 80 / 16 / 30 mmzen-control-DALI-2-Switch-Module-fig-1

Wireless system overview

zen-control-DALI-2-Switch-Module-fig-2

ഇൻസ്റ്റലേഷൻ

ബോക്സിൽ നിന്ന് ഉൽപ്പന്നം നീക്കം ചെയ്യുക, എന്തെങ്കിലും കേടുപാടുകൾ ഉണ്ടോയെന്ന് പരിശോധിക്കുക. ഉൽപ്പന്നത്തിന് കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെന്ന് നിങ്ങൾ വിശ്വസിക്കുന്നുവെങ്കിൽ, ഉൽപ്പന്നം ഇൻസ്റ്റാൾ ചെയ്യരുത്. ദയവായി അത് അതിന്റെ ബോക്സിലേക്ക് തിരികെ പാക്ക് ചെയ്‌ത് പകരം വാങ്ങുന്ന സ്ഥലത്തേക്ക് തിരികെ നൽകുക.

ഉൽപ്പന്നം തൃപ്തികരമാണെങ്കിൽ, ഇൻസ്റ്റാളേഷനുമായി തുടരുക:

  1. സുരക്ഷാ മുന്നറിയിപ്പുകൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
  2. Connect the two DALI terminals to the DALI line, ensuring wiring regulations are followed. DALI is not polarised. DALI is not SELV and as such must be treated as LV. Do not connect the switch to any mains voltages.
  3. Connect momentary switch(es) to the floating contact inputs Only one momentary switch per input is supported. Note: The zc-switch-6 only supports momentary press inputs and does not support absolute/latching inputs.
  4. Install switch behind the wall plate or mounting enclosure for the momentary switch.

വയറിംഗ് ഡയഗ്രം

zen-control-DALI-2-Switch-Module-fig-3

സുരക്ഷാ വിവരങ്ങൾ

  • ലൈസൻസുള്ള ഒരു ഇലക്ട്രീഷ്യൻ മാത്രമേ ഈ ഉൽപ്പന്നം ഇൻസ്റ്റാൾ ചെയ്യാവൂ.
  • ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ്, വൈദ്യുതി വിതരണം ഓഫ് ചെയ്ത് വേർതിരിക്കുക.
  • ഉപയോക്താക്കൾക്ക് സേവനയോഗ്യമായ ഭാഗങ്ങളില്ല, ഉൽപ്പന്നത്തിന്റെ ഏതെങ്കിലും ഭാഗം സർവ്വീസ് ചെയ്യാൻ ശ്രമിക്കുന്നത് വാറന്റി അസാധുവാകും
  • DALI SELV അല്ല, അതിനാൽ LV ആയി കണക്കാക്കണം.
  • ഇൻസ്റ്റാളർ എന്ന നിലയിൽ, പ്രസക്തമായ എല്ലാ കെട്ടിട, സുരക്ഷാ കോഡുകളും നിങ്ങൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കേണ്ടത് നിങ്ങളുടെ ഉത്തരവാദിത്തമാണ്. പ്രസക്തമായ നിയമങ്ങൾക്കായി ആപ്ലിക്കേഷൻ മാനദണ്ഡങ്ങൾ കാണുക.
  • When the installation is complete, leave this manual with the  building’s owner for future reference.

പതിവുചോദ്യങ്ങൾ

Q: Can I use latching switches with the zc-switch-6 module?

A: No, the zc-switch-6 only supports momentary (non-latching) inputs.

ചോദ്യം: ഉൽപ്പന്നത്തിൽ ഒരു പ്രശ്നം നേരിടുകയാണെങ്കിൽ ഞാൻ എന്തുചെയ്യണം?

A: If you encounter any issues, please contact a licensed electrician or the supplier for assistance. Do not attempt to service the product yourself as it may void the warranty.

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

zen control DALI-2 Switch Module [pdf] ഉപയോക്തൃ ഗൈഡ്
zc-switch-6, DALI-2 Switch Module, DALI-2, Switch Module, Module

റഫറൻസുകൾ

ഒരു അഭിപ്രായം ഇടൂ

നിങ്ങളുടെ ഇമെയിൽ വിലാസം പ്രസിദ്ധീകരിക്കില്ല. ആവശ്യമായ ഫീൽഡുകൾ അടയാളപ്പെടുത്തി *