1. ആമുഖം
The EBYTE E22-M Series are high-performance LoRa wireless modules featuring the new generation SX1262 and SX1268 RF transceiver chips. These modules are designed for long-distance, low-power spread spectrum communication, offering significant improvements in efficiency, speed, and range compared to previous LoRa modules. They are available in various frequency bands including 170MHz, 433MHz, 868MHz, and 915MHz, and come in compact SMD packages suitable for diverse applications.
2 പ്രധാന സവിശേഷതകൾ
- Advanced RF Chips: Utilizes SX1262 and SX1268 chips, offering full performance upgrade over SX1276 and SX1278.
- വൈഡ് ഫ്രീക്വൻസി പിന്തുണ: Compatible with 170MHz, 433MHz, 470MHz, 490MHz, 868MHz, and 915MHz bands.
- വിപുലീകൃത ആശയവിനിമയ ശ്രേണി: Achieves up to 7000m (E22 Series) communication distance, a 40% increase over ordinary LoRa modules.
- High Efficiency & Low Power: Doubled transmission power with the same current consumption, leading to lower overall power usage.
- Faster Air Rate: Supports up to 300kbps, significantly faster than traditional LoRa modules (37.5kbps).
- കോംപാക്റ്റ് ഡിസൈൻ: Available in small SMD packages (e.g., 10x10mm, 20x14mm, 38.5x24mm).
- High-Precision TCXO: Integrated temperature-compensated crystal oscillator ensures stable frequency operation from -40°C to +85°C.
- ശക്തമായ ഘടകങ്ങൾ: Features SEMTECH chips, Wurth wirewound inductors, and dual antenna options.
- എളുപ്പമുള്ള സംയോജനം: All IOs are brought out to facilitate secondary development.
- മെച്ചപ്പെടുത്തിയ പ്രകടനം: Incorporates external LNA and independent noise reduction circuits for superior anti-interference capabilities.
3 സാങ്കേതിക സവിശേഷതകൾ
The E22-M series modules offer various configurations. Below are general specifications and detailed parameters for specific models.
3.1 പൊതു സവിശേഷതകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ബ്രാൻഡ് നാമം | EBYTE |
| ടൈപ്പ് ചെയ്യുക | മൊഡ്യൂൾ |
| പാക്കേജ് | എസ്എംഡി |
| സപ്ലൈ വോളിയംtage | 1.8 - 3.7 V (varies by model) |
| അപേക്ഷ | Computer, IoT, Wireless Communication |
| ഉത്ഭവം | മെയിൻലാൻഡ് ചൈന |
| അവസ്ഥ | പുതിയത് |
| ഉയർന്ന തലത്തിലുള്ള രാസവസ്തുക്കൾ | ഒന്നുമില്ല |
| ഇഷ്ടാനുസൃതമാക്കൽ | അതെ |
3.2 Detailed Product Parameters
For specific model parameters, please refer to the tables in Figure 3 and Figure 4. Key parameters include RF Chip (SX1262/SX1268), Carrier Frequency, Transmit Power, Communication Distance, Interface Type (SPI), Antenna Type (IPEX/Stamp Holes), Size, and Operating Voltage.
4. Setup and Pin Definitions
The E22-M series modules are designed for easy integration into your projects. Understanding the pin definitions is crucial for proper setup.
4.1 Pin Definitions for E22-400MM22S / E22-900MM22S / E22-170M22S
Refer to Figure 5 for the pinout and remarks for these specific module types. Important pins include VCC (power supply, 1.8-3.7V), GND (power reference ground), NRST (chip reset), ANT (RF interface), and various SPI and GPIO pins.
4.2 Pin Definitions for E22-400M30S / E22-900M30S / E22-400M33S / E22-170M30S / E22-170M33S
Figure 6 provides the pinout details for the larger E22-xM30S/M33S modules. Note the VCC range of 2.5-5.5V for some models and the specific functions of DIO pins.
4.3 Pin Definitions for E22-400MBL-01 / E22-900MBL-01
For the E22-xMBL-01 modules, refer to Figure 7. These modules include pins for 3.3V electrical lead, VIO, MCU reset, SWIM, and module mode switching (M0, M1).
4.4 Test Evaluation Kits
EBYTE offers Test Evaluation Kits to help users quickly evaluate and test the modules. These kits typically include pre-welded modules, antennas, and necessary cables.
The kits are designed for ease of use:
- Used to test EBYTE E22 series serial port modules.
- Includes pre-welded corresponding modules.
- All E22 module pins are brought out for accessibility.
- Equipped with a USB interface for direct connection to a computer.
- Provides stable operation and simplifies development.
- Features high-quality components for high stability.
The Offline Test Evaluation Kit (Figure 10) includes an E22 Offline Test Board with a pre-welded module, glue stick antenna, 2x10PIN header, and a Type-C adapter cable. This kit features an OLED display, LED indicator, buttons, and a buzzer for direct offline testing and parameter configuration.
The Offline Test Evaluation Kit (Figure 11) is ready to use and recommended with a power bank for direct offline testing. It features an OLED screen for data display, key operations for parameter configuration, and sound/light prompts. An onboard STM32E103C8T6 master control supports secondary development.
5. ഓപ്പറേഷൻ
Operating the E22-M series modules involves configuring parameters and managing data transfer. The modules support various communication modes and offer robust performance.
5.1 Data Transfer Example
As shown in Figure 12, a typical data transfer setup involves a transmitter and a receiver module, each connected to a power supply (e.g., computer or power bank). The real-time display on the test kits can show parameters such as channel, rate, transmit power (Pwr), total transmissions (Tx Total), number of transmissions (Tx Number), lost packets (Lost), and packet loss rate (Lost Pkt).
To perform basic testing, it is recommended to order two pieces (one transmitter, one receiver) for easy sending and receiving tests.
5.2 Communication with SX127x Series
The E22-M series, utilizing SX1262 and SX1268 chips, is designed to communicate with older SX1276 and SX1278 chips while offering optimized power consumption, communication range, and speed (Figure 13). This ensures backward compatibility for existing systems while providing enhanced performance.
6. പരിപാലനം
EBYTE LoRa modules are designed for reliability and stability. Minimal maintenance is required under normal operating conditions.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the module operates within its specified temperature range (-40°C to +85°C) and humidity levels to prevent damage.
- വൈദ്യുതി വിതരണം: Provide a stable power supply within the recommended voltage range (1.8-3.7V or 2.5-5.5V depending on the model) to avoid erratic behavior or component stress.
- ശാരീരിക പരിശോധന: Periodically inspect the module for any visible damage, loose connections, or signs of corrosion, especially if used in harsh environments.
- വൃത്തിയാക്കൽ: If necessary, gently clean the module with a soft, dry brush or compressed air to remove dust and debris. Avoid using liquids or harsh chemicals.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: Check the EBYTE official webപ്രകടനം മെച്ചപ്പെടുത്തുന്നതോ അറിയപ്പെടുന്ന പ്രശ്നങ്ങൾ പരിഹരിക്കുന്നതോ ആയ ലഭ്യമായ ഏതെങ്കിലും ഫേംവെയർ അപ്ഡേറ്റുകൾക്കായി സൈറ്റ്.
7. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with your E22-M series module.
- ആശയവിനിമയം ഇല്ല:
- വൈദ്യുതി വിതരണം വോളിയം പരിശോധിക്കുകtage and connections are correct according to the pin definitions.
- Check antenna connection; ensure it is securely attached and the correct type for your frequency band.
- Confirm that the modules are configured to the same frequency, air rate, and other communication parameters.
- Inspect wiring for shorts or open circuits, especially for SPI connections.
- Ensure the NRST pin is properly handled (chip reset input pin, low level is effective).
- Short Communication Distance:
- Check for obstructions between the transmitter and receiver. LoRa performance is best in line-of-sight.
- Ensure antennas are correctly positioned and have sufficient gain (e.g., 5dBi recommended for long-distance tests).
- Verify transmit power settings; higher power generally means longer range.
- Reduce interference from other electronic devices or RF sources.
- Check the environment for excessive noise or reflections.
- Unstable Frequency/Performance:
- Ensure the module is operating within its specified temperature range. Extreme temperatures can affect crystal oscillator stability.
- Provide a clean and stable power supply. Add external ceramic filter capacitors to VCC if necessary, as recommended in pin definitions.
- ശരിയായ ഗ്രൗണ്ടിംഗ് പരിശോധിക്കുക.
- മൊഡ്യൂൾ പ്രതികരിക്കുന്നില്ല:
- Perform a hardware reset using the NRST pin.
- Re-check all power and data connections.
- If using a test kit, ensure the onboard master control (e.g., STM32E103C8T6) is functioning correctly.
For complex issues or detailed circuit analysis, refer to the circuit diagram in Figure 14 and the official documentation available on the EBYTE webസൈറ്റ്.
8 ഉപയോക്തൃ നുറുങ്ങുകൾ
Based on general usage and product characteristics, here are some tips for optimal performance:
- ആൻ്റിന പ്ലേസ്മെൻ്റ്: For best range, ensure your antenna has a clear line of sight and is positioned as high as possible. Avoid placing it near large metal objects.
- പവർ ഫിൽട്ടറിംഗ്: Always use an external ceramic filter capacitor on the VCC line, especially if your power supply is noisy, to ensure stable operation.
- പരിശോധന: When developing, it is highly recommended to use two modules (one transmitter, one receiver) to facilitate comprehensive testing of your communication link.
- ഡോക്യുമെൻ്റേഷൻ: Always refer to the latest datasheets and application notes from the EBYTE official website for the most accurate and up-to-date information regarding specific module variants and advanced configurations.
Note: No specific user tips were available from the provided Q&A or reviews. These tips are generalized based on product features.
9. വാറൻ്റിയും പിന്തുണയും
For detailed warranty information, technical support, and access to the latest documentation (datasheets, application notes, software tools), please visit the official EBYTE webസൈറ്റ്:
You can also find specific product files for the E22 series at: https://www.cdebyte.com/product_serch/E22/1/
10. സുരക്ഷയും അനുസരണവും
⚠ മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിന് നിങ്ങളെ ലെഡ് ഉൾപ്പെടെയുള്ള രാസവസ്തുക്കൾ തുറന്നുകാട്ടാൻ കഴിയും, ഇത് ക്യാൻസറിനും ജനന വൈകല്യങ്ങൾക്കും മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾക്കും കാരണമാകുമെന്ന് കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയാം. കൂടുതൽ വിവരങ്ങൾക്ക് പോകുക www.P65Warnings.ca.gov.
