User Manual: Dual FSESC4.20 Plus & VX2 Remote Control Combo

1. ആമുഖം

Thank you for choosing the Flipsky Dual FSESC4.20 Plus Speed Controller and VX2 Remote Control combo. This powerful and versatile system is designed for electric skateboards, scooters, ebikes, and other ESK8 applications, offering precise control and robust performance. This manual will guide you through the setup, operation, and maintenance of your new speed controller and remote.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

2.1 ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

• Dual FSESC4.20 Plus Speed Controller
• VX2 Remote Control
• VX2 Remote Receiver Module
• Connection Cables (for FSESC and remote receiver)
• USB Cable (for FSESC configuration)
• Wrist Strap (for VX2 Remote)

Figure 1: Complete Combo Kit including FSESC, VX2 Remote, and accessories.

2.2 പ്രധാന സവിശേഷതകൾ

• Integrated anti-spark switch function on the PCBA for enhanced safety.
• Compact design for easier integration into various enclosures.
• Heatsink included for efficient thermal management.
• Real-time data display on the VX2 Remote's 0.95" OLED screen.
• Support for 3 speed modes and cruise control.
• Remote and E-skateboard power indication lights.
• Rechargeable Li-ion battery for the VX2 Remote with up to 12 hours of working time.

Figure 2: The Dual FSESC4.20 Plus Speed Controller and VX2 Remote Control.

3 സ്പെസിഫിക്കേഷനുകൾ

3.1 Dual FSESC4.20 Plus Speed Controller

Figure 3: Dimensions of the Dual FSESC4.20 Plus Speed Controller.

3.2 VX2 Remote Control

Figure 4: The VX2 Remote Control with its OLED display.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the safe and optimal performance of your electric vehicle. Please follow these guidelines carefully.

4.1 Wiring the Dual FSESC4.20 Plus

1. മോട്ടോർ കണക്ഷനുകൾ: Connect your brushless motors to the motor phase wires (typically A, B, C or U, V, W) on the FSESC. Ensure correct phasing for smooth operation.
2. ബാറ്ററി കണക്ഷൻ: Connect your battery pack (3-13S LiPo, 8V-60V) to the main power input of the FSESC. The FSESC has an integrated anti-spark switch, so external anti-spark solutions are not strictly necessary but can be used for added protection.
3. റിസീവർ കണക്ഷൻ: Connect the VX2 remote receiver module to the appropriate UART or PPM port on the FSESC using the provided cables. Refer to the FSESC port labels for correct orientation.
4. ഓപ്ഷണൽ കണക്ഷനുകൾ: If using additional accessories (e.g., lights, external BEC), connect them to the available ports as per your vehicle's design.

ചിത്രം 5: മുകളിൽ view of the FSESC, showing various connection points.

4.2 Pairing the VX2 Remote Control

The VX2 Remote Control and its receiver typically come pre-paired. If re-pairing is necessary:

1. Ensure the FSESC is powered on and the receiver is connected.
2. Turn on the VX2 Remote Control.
3. Follow the pairing instructions provided with the VX2 Remote, usually involving pressing a button on the receiver and then on the remote within a short timeframe.
4. Confirm successful pairing by checking the remote's OLED display for connection status and real-time data.

Figure 6: VX2 Remote Control and its receiver module.

4.3 Initial Configuration (FSESC)

The FSESC requires configuration using VESC Tool software (available from VESC Project website) to match your specific motor and battery setup. This involves:

• Connecting the FSESC to your computer via the provided USB cable.
• Running the motor detection wizard in VESC Tool.
• Setting battery parameters (cell count, voltagഇ പരിധികൾ).
• Configuring control modes (e.g., current control, duty cycle control).
• Adjusting braking and acceleration curves to your preference.

Always perform initial configuration and testing in a safe, controlled environment with the wheels off the ground.

5. ഓപ്പറേഷൻ

5.1 VX2 Remote Control Functions

• Throttle Wheel: Controls acceleration and braking. Push forward for acceleration, pull back for braking.
• സ്പീഡ് മോഡ് ബട്ടൺ: Cycle through 3 different speed modes (e.g., low, medium, high) to match your riding style and environment.
• ക്രൂയിസ് കൺട്രോൾ ബട്ടൺ: Activates/deactivates cruise control, maintaining a constant speed.
• OLED ഡിസ്പ്ലേ: Provides real-time data such as speed, battery level (remote and vehicle), distance, and current.
• Power Indication Lights: Monitor the battery status of both the remote and your electric vehicle.

5.2 പവർ ഓൺ/ഓഫ്

1. പവർ ഓണാക്കാൻ: Ensure all connections are secure. Press the power button on your electric vehicle (connected to the FSESC). Then, turn on the VX2 Remote Control.
2. പവർ ഓഫ് ചെയ്യാൻ: First, turn off the VX2 Remote Control. Then, power off your electric vehicle.

Always ensure the remote is turned on before operating the vehicle to prevent unexpected acceleration or braking.

6. പരിപാലനം

• വൃത്തിയായും ഉണങ്ങിയും സൂക്ഷിക്കുക: Regularly clean the FSESC and remote to prevent dust and debris buildup. Avoid exposure to water or excessive moisture.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Periodically check all wiring connections for looseness or damage. Secure any loose connections.
• Remote Battery Charging: Charge the VX2 Remote's Li-ion battery using the provided USB cable when the battery indicator is low. Avoid overcharging or deep discharging.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Check the Flipsky website or VESC Project for the latest firmware updates for the FSESC. Updating firmware can improve performance and add new features.
• സംഭരണം: When not in use for extended periods, store the components in a cool, dry place. For the remote, ensure its battery is at a partial charge (around 50%) before long-term storage.

7. പ്രശ്‌നപരിഹാരം

• ശക്തിയില്ല: Check battery connections, ensure the anti-spark switch is engaged, and verify the battery is charged.
• റിമോട്ട് കണക്റ്റ് ചെയ്യുന്നില്ല: Ensure the remote and receiver are powered on and within range. Attempt to re-pair the remote and receiver if necessary.
• Motor Not Spinning/Irregular Behavior: Verify motor phase wire connections. Re-run motor detection in VESC Tool. Check for any error codes displayed on the remote or in VESC Tool.
• Unexpected Acceleration/Braking: Immediately release the throttle and power off the system. Check remote calibration and receiver connections. Ensure no interference is present.
• അമിത ചൂടാക്കൽ: Ensure the FSESC has adequate airflow. Check motor current limits in VESC Tool. Reduce load or riding intensity if persistent.

For more detailed troubleshooting or specific error codes, please refer to the VESC Tool documentation or contact Flipsky support.

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Start with Low Speed Modes: Especially for new users or new builds, begin with the lowest speed mode on the VX2 remote to familiarize yourself with the vehicle's response.
• Regular VESC Tool Checks: Periodically connect your FSESC to VESC Tool to monitor motor temperatures, battery health, and check for any logged faults.
• എല്ലാ ഘടകങ്ങളും സുരക്ഷിതമാക്കുക: Ensure the FSESC, receiver, and all wiring are securely mounted and protected from vibrations and impacts within your vehicle's enclosure.
• Practice in Open Areas: Always practice operating your electric vehicle in open, safe areas away from traffic and pedestrians until you are fully comfortable with its controls.

9. പിന്തുണ

For technical assistance, warranty information, or further inquiries, please visit the official Flipsky website or contact their customer support. Always provide your product model (V4PLUS+VX2) and a detailed description of your issue when seeking support.