KT Ebike Controller Series Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your KT Ebike Controller. Designed for various ebike hub motors, these controllers support 24V, 36V, and 48V systems, catering to both hall sensor and sensorless motor configurations. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2 സുരക്ഷാ വിവരങ്ങൾ

⚠️ നിരാകരണം: തീപിടുത്ത സാധ്യതയെക്കുറിച്ച് ദയവായി ശ്രദ്ധിക്കുകയും ചാർജ് ചെയ്യുന്നതിനും സംഭരിക്കുന്നതിനുമുള്ള നിർദ്ദേശ മാനുവൽ കർശനമായി പാലിക്കുകയും ചെയ്യുക.

• Always disconnect the battery before performing any installation, maintenance, or repair work.
• ഷോർട്ട് സർക്യൂട്ടുകൾ തടയുന്നതിന് എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• കൺട്രോളർ വെള്ളത്തിലോ അമിതമായ ഈർപ്പത്തിലോ തുറന്നുകാട്ടരുത്.
• Avoid modifying the controller or its wiring, as this may void the warranty and create safety hazards.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The KT Ebike Controller series offers a range of options to suit different ebike motor types and power requirements. These controllers are specifically designed to work with KT Displays.

കൺട്രോളർ തരങ്ങൾ:

• T06P / T09P (Sensorless Controllers): These models are designed for sensorless motors, utilizing a square wave control method.
  • ടി06പി: റേറ്റുചെയ്ത വോളിയംtage 24V/36V, Rated Current 15A. Suitable for 250W-350W sensorless motors.
  • ടി09പി: റേറ്റുചെയ്ത വോളിയംtage 36V/48V, Rated Current 22A. Suitable for 500W sensorless motors.
• T06S / T09S / T12S / T12H (Hall Sensor Controllers): These models are designed for motors equipped with Hall sensors, utilizing a sine wave control method for smoother operation.
  • T06S: റേറ്റുചെയ്ത വോളിയംtage 24V/36V, Rated Current 15A. Suitable for 250W-350W sensor motors.
  • T09S: റേറ്റുചെയ്ത വോളിയംtage 36V/48V, Rated Current 22A. Suitable for 500W sensor motors.
  • T12S: റേറ്റുചെയ്ത വോളിയംtage 36V/48V, Rated Current 30A. Suitable for 800W-1000W sensor motors.
  • T12H: റേറ്റുചെയ്ത വോളിയംtage 36V/48V, Rated Current 40A. Suitable for 1000W-1500W sensor motors.

അനുയോജ്യത കുറിപ്പ്: This is a KT Controller and is only compatible with KT Displays. Other brand displays will not work. These controllers are compatible with AKM, Bafang, MXUS, Shengyi, Xiongda motors, among others. For sensorless motors (T06P, T09P), ensure your motor has a 3-pin cable plug. For Hall sensor motors (T06S, T09S, T12S, T12H), ensure your motor has a 9-pin plug.

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണം

Carefully follow the wiring diagrams provided for your specific controller model. Ensure all connections are firm and correctly matched before powering on the system.

General Wiring Connections:

• ബാറ്ററി: Connect to the main power input.
• മോട്ടോർ: Connect the motor phase wires and, if applicable, the Hall sensor wires.
• ഡിസ്പ്ലേ: Connect to the KT Display unit.
• ത്രോട്ടിൽ: Connect the throttle for speed control.
• ബ്രേക്ക്: Connect brake levers with cut-off sensors.
• ഹാൾ സെൻസർ: (For 'S' models) Connect the motor's Hall sensor wires.
• സ്പീഡ് സെൻസർ: Connect the speed sensor if your system uses one.
• PAS സെൻസർ: Connect the Pedal Assist System sensor.
• ക്രൂയിസ്: Connect if your system supports cruise control.
• HWBS: (High/Low Brake Signal) Connect as per your brake system requirements.

Refer to the detailed wiring diagrams below for visual guidance:

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the controller is correctly installed and connected to a compatible KT Display, you can operate your ebike. The specific functions will depend on your KT Display model and ebike setup.

• പവർ ഓൺ/ഓഫ്: Use the power button on your KT Display to turn the system on or off.
• വേഗത നിയന്ത്രണം: Adjust speed using the throttle or by engaging the Pedal Assist System (PAS).
• ബ്രേക്കിംഗ്: Activating the brake levers will cut off motor power, ensuring safe stopping.
• പ്രദർശന പ്രവർത്തനങ്ങൾ: Your KT Display will show information such as speed, battery level, assist level, and trip distance. Consult your KT Display manual for detailed operation.

7. പരിപാലനം

• വൃത്തിയായും ഉണങ്ങിയും സൂക്ഷിക്കുക: Regularly wipe down the controller with a dry cloth. Avoid exposing it to water, mud, or excessive dust.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Periodically inspect all wiring connections for tightness and signs of corrosion or damage. Loose connections can lead to intermittent power or system failure.
• അമിതമായി ചൂടാക്കുന്നത് ഒഴിവാക്കുക: Ensure the controller has adequate airflow and is not covered, especially during prolonged use, to prevent overheating.
• സംഭരണം: When storing the ebike for extended periods, especially in cold conditions, ensure the battery is properly maintained and stored according to its own manual.

8. പ്രശ്‌നപരിഹാരം

Q: The motor is not responding or has intermittent power.

A: Check all power connections, including the battery and motor phase wires. For Hall sensor models, ensure the Hall sensor wires are securely connected. Verify that the KT Display is powered on and functioning correctly.

Q: My controller seems to be missing a plug for headlights.

A: Not all controller models or kits include dedicated headlight connections. Please check your specific product variant's specifications or contact customer support for information on compatible accessories or alternative wiring solutions.

Q: There are extra cables that look like they bypass signals for the screen and cruise line. Are these correct?

A: Some controllers may include additional wiring for advanced features like display bypass or cruise control. Refer to the detailed wiring diagrams for your specific model to understand the function of each cable and ensure correct connection for these features.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Match Components: Always ensure your controller's voltage and current ratings are compatible with your ebike motor and battery specifications.
• KT Display Only: Remember that these controllers are designed exclusively for KT brand displays. Using other displays will result in incompatibility.
• സുരക്ഷിത കണക്ഷനുകൾ: Before every ride, quickly check that all visible connections are secure to prevent unexpected disconnections.
• മോട്ടോർ തരം: Confirm whether your motor is a Hall sensor type or sensorless and select the appropriate controller model ('S' for Hall sensor, 'P' for sensorless).

10. വാറണ്ടിയും പിന്തുണയും

KT Ebike Controllers come with service commitments including fast delivery and refunds for issues such as lost or damaged packages. Additionally, free returns are available within 90 days of purchase.

For specific warranty claims, technical assistance, or further support, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue for prompt assistance.