ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your DOOYA DC136N Universal Garage Door Receiver Controller. This device is designed to provide remote control functionality for roller shutters and tubular motors, enhancing convenience and security.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഏതെങ്കിലും വയറിംഗ് അല്ലെങ്കിൽ അറ്റകുറ്റപ്പണി നടത്തുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും വൈദ്യുതി വിച്ഛേദിക്കുക.
• Ensure all wiring is done by a qualified professional if you are unsure.
• റിമോട്ട് കൺട്രോളുകൾ കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Do not expose the receiver to moisture or extreme temperatures.
• മോട്ടോറിന്റെ വോള്യം പരിശോധിക്കുകtage and current requirements are compatible with the receiver.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The DOOYA DC136N is a versatile receiver controller that allows you to operate your garage door or roller shutter remotely. It comes in various configurations with different remote control options.

3.1 ഘടകങ്ങൾ

Depending on your purchased model, your package may include:

• DC136N Receiver Controller
• Standard Remote Controls (2, 3, or 4 units)
• Thumb Remote Controls (1, 2, 3, or 4 units)
• Wireless Wall Switch (optional, included in some models)

3.2 റിസീവർ സവിശേഷതകൾ

• പവർ ഇൻഡിക്കേറ്റർ ലൈറ്റ്
• Motor and power connection ports
• Pairing button (for remote control synchronization)
• Direction reversal button
• Manual control buttons (Up, Stop, Down)

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

5.1 വയറിംഗ് നിർദ്ദേശങ്ങൾ

പ്രധാനപ്പെട്ടത്: Ensure power is disconnected before proceeding with wiring. Incorrect wiring can cause damage to the device or motor, and pose a safety hazard. If you are not confident, consult a qualified electrician.

1. Identify the motor cable and power supply cable.
2. Connect the motor cable to the receiver's motor port. Ensure the wire colors match as follows:
   • Blue wire: Common
   • Brown wire: Open Door (Up)
   • Black wire: Close Door (Down)
   • Yellow-green wire: Ground
3. Connect the power plug cable to the receiver's power port. Ensure the wire colors match as follows:
   • Blue wire: Live
   • Brown wire: Neutral
   • Yellow-green wire: Ground
4. Double-check all connections for security and correct polarity.

5.2 Pairing Remote Controls

To pair a new remote control with the DC136N receiver:

1. Ensure the receiver is powered on. The red indicator light should be on.
2. Locate the "Pairing Key" (对码键) on the side of the receiver (refer to Figure 2).
3. Press and hold the "Pairing Key" on the receiver until the indicator light starts to flash.
4. While the indicator light is flashing, press any button on the remote control you wish to pair.
5. The receiver's indicator light should stop flashing and remain solid, indicating successful pairing.
6. Test the remote control to ensure it operates the motor correctly.

5.3 Adjusting Motor Direction

If the motor operates in the opposite direction to the remote control commands (e.g., "Up" button makes it go down), you can reverse the direction:

1. Locate the "Reversing Key" (换向键) on the side of the receiver (refer to Figure 2).
2. Press and hold the "Reversing Key" for a few seconds until the motor briefly jogs or the indicator light changes.
3. Test the remote control again to confirm the direction is corrected.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and paired, operating your roller shutter or garage door is straightforward using the remote control or the manual buttons on the receiver.

6.1 റിമോട്ട് കൺട്രോൾ ഉപയോഗിക്കുന്നു

The remote control typically features three buttons:

• മുകളിലേക്കുള്ള അമ്പടയാളം: Moves the shutter/door upwards.
• താഴേക്കുള്ള അമ്പടയാളം: Moves the shutter/door downwards.
• Square/Stop Button: Stops the shutter/door at its current position.

Press the corresponding button to achieve the desired action. A short press is usually sufficient.

6.2 Using Manual Buttons on the Receiver

The receiver itself has three manual control buttons (Up, Stop, Down) for direct operation, useful if a remote is unavailable or for testing purposes.

• Press the top button to move the shutter/door upwards.
• Press the middle button to stop the shutter/door.
• Press the bottom button to move the shutter/door downwards.

7. പരിപാലനം

The DOOYA DC136N receiver controller requires minimal maintenance to ensure long-lasting performance.

• വൃത്തിയാക്കൽ: Wipe the receiver and remote controls with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement (Remotes): If a remote control's range decreases or it stops responding, replace its battery. Refer to the remote's specific instructions for battery type and replacement procedure.
• കണക്ഷൻ പരിശോധന: Periodically inspect wiring connections to ensure they are secure and free from corrosion or damage.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your DC136N receiver, try the following troubleshooting steps:

8.1 Motor Not Responding to Remote

• പവർ പരിശോധിക്കുക: Ensure the receiver is powered on and its indicator light is illuminated.
• റിമോട്ട് ബാറ്ററി പരിശോധിക്കുക: Replace the remote control's battery if it's low or dead.
• റിമോട്ട് വീണ്ടും ജോടിയാക്കുക: Attempt to re-pair the remote control with the receiver following the instructions in Section 5.2.
• വയറിംഗ് പരിശോധിക്കുക: Verify all motor and power connections are secure and correctly wired.
• Test Manual Buttons: Try operating the motor using the manual buttons on the receiver. If manual operation works, the issue might be with the remote or its pairing.

8.2 Motor Operates in Wrong Direction

• Reverse Direction: Use the "Reversing Key" on the receiver to change the motor's direction (refer to Section 5.3).
• Check Motor Wiring: Ensure the brown (open) and black (close) wires from the motor are correctly connected to the receiver.

8.3 Intermittent Operation

• സിഗ്നൽ ഇടപെടൽ: Ensure there are no strong radio frequency sources near the receiver or remote that could cause interference.
• വിദൂര ശ്രേണി: റിമോട്ട് അതിന്റെ ഫലപ്രദമായ പരിധിക്കുള്ളിൽ പ്രവർത്തിപ്പിക്കുക.
• അയഞ്ഞ കണക്ഷനുകൾ: Check all wiring connections for any looseness.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Consider mounting the receiver in a location that is easily accessible for pairing and manual operation, but protected from environmental elements.
• If using multiple remote controls, pair them one by one to avoid confusion.
• Keep a spare battery for your remote controls on hand.

10. വാറൻ്റിയും പിന്തുണയും

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.