Cardot Keyless Entry and Remote Start System User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Cardot Keyless Entry and Remote Start System. This system is designed to upgrade your vehicle with modern conveniences such as push-button start, remote engine start, keyless entry, and smartphone control. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

പ്രധാന അനുയോജ്യതാ കുറിപ്പുകൾ:

• This product is primarily suitable for vehicles with an ignition key start mechanism and gasoline engines.
• It is generally not compatible with European car brands such as VW, Peugeot, Renault, Audi, BMW, Benz, etc.
• The Bluetooth app, "Aistart," is not compatible with Samsung mobile phones. Please use another Android device or an iPhone.
• Before installation, confirm your car's brand, year, and ignition type (key start or button start) with the seller to ensure compatibility.

2. സിസ്റ്റം ഘടകങ്ങൾ

The Cardot Keyless Entry and Remote Start System typically includes the following components:

• മെയിൻഫ്രെയിം: The central control unit of the system.
• പ്രധാന ലൈൻ: Primary wiring harness connecting the mainframe to the vehicle's electrical system.
• റിമോട്ട് കൺട്രോളർ: Key fobs for remote operations. Four different styles may be available.
• NFC Pass: A card for emergency lock/unlock, replacing traditional passpads.
• Start Cable: Wiring for the push-button start.
• High Frequency Antenna: For long-distance remote control signals.
• Low Frequency Antenna: For Passive Keyless Entry (PKE) functions.
• ബ്ലൂടൂത്ത് മൊഡ്യൂൾ: Enables smartphone app control.
• Start Stop Button: The push-button ignition switch.

Remote Key Options:

3. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Professional installation is highly recommended for this product. Incorrect wiring can damage your vehicle's electrical system or the product itself. Always disconnect the car battery before starting installation.

3.1 General Wiring Diagram

3.2 Immobilizer Bypass (for Chip Keys)

Some vehicles are equipped with an RF-based immobilizer system that uses a transponder chip in the ignition key. To bypass this, you will need to hide the original key's chip near the ignition coil:

1. Dismantle the ignition coil from the ignition switch.
2. Insert the key with the chip into the center hole of the ignition coil.
3. Ensure the direction and distance between the key and the coil match when the original key is inserted into the ignition.
4. Use electrical insulation tape to wrap the coil and key together.
5. Fix them in a hidden location under the steering wheel.
6. Cut off the key blade, turn it to the ON or ACC position, leaving 1-2mm to release the steering wheel lock.

3.3 6P Start Wires Connections

Connect the 6P start wires as follows:

• Blue Start Wire: Connect to the vehicle's start wire (positive power when mechanical key is turned to start position). This wire has instant power and then turns off.
• Yellow ON1 (ING1) Wire: Connect to the main ignition wire that provides +12V when the ignition key is ON and during cranking. This wire has constant positive power.
• Red Wire (Constant 12V): Connect to the battery or constant power wire at the ignition switch.
• Green ON2 (ING2) Wire: Connect to the main ignition wire that provides an instant +12V signal and then disappears when the key is turned to ON. Use a multimeter or test pencil to find this wire.
• White ACC Wire: Connect to the accessory wire from the ignition switch that powers the heater/air conditioner. Some cars may have multiple accessory wires.
• Red Wire (Constant 12V): Connect to the battery or constant power wire at the ignition switch. (Note: If your ignition switch has only one 12V constant wire, connect only one red wire from our 6P start cables).

3.4 Other Wire Definitions

• Green wire (door rolling up output): Negative 15-second signal when locking. Works with universal window closer modules.
• Yellow/black wire (bypass signal): Negative output for bypass.
• Black wire (Ground): Connect to car metal body.
• Orange/black wire (foot brake): Connect to car footbrake switch for remote learning reset.
• Blue wire (Hand brake +12V): Connect to car metal body for automatic transmission, or car handbrake switch for manual transmission.
• Orange wire (hand brake -ve input): For manual transmission, connect to handbrake switch.
• Grey wire (side door alarm trigger): Negative input signal for side door switch. Polarity can be set by jumper.
• Yellow wire (trunk alarm trigger): Auxiliary negative input signal for trunk alarm.
• Purple wire (trunk output control): Connect to original car trunk trigger control wire.
• Purple/white wire (trunk optional): If original car trunk control is +VE, connect to 12V; if -VE, connect to -VE.
• Pink wire (siren output): Connect to car alarm siren input wire.
• Red/black wire (siren optional): If original car siren is +VE trigger, connect to 12V; if -VE trigger, connect to -VE.
• Black/white wire (pedal signal): Negative output for pedal signal.
• Brown wires (left/right turning light): Positive signal output, typically found under the steering wheel.
• Black/white clutch output wire: For cars requiring clutch press before start, simulates pressing the clutch.
• Yellow/black bypass output wire: For cars with chip key immobilizer, works with a universal bypass module.

3.5 ആൻ്റിന ഇൻസ്റ്റലേഷൻ

• HF Antenna: Ensure the control box and antenna are fixed firmly. The antenna should not touch ground and be placed as high as possible (vertical height from floor).
• Front RFID Sensing Antenna: Fix to the front windshield glass. Do not paste it on any metal surface.
• Rear RFID Sensing Antenna: Fix under the rear windshield glass. Do not paste it on any metal surface.

3.6 DIP Switching and Jumper Settings

Refer to Figure 3.2 for detailed DIP switch and jumper settings to customize functions such as PKE working mode, fuel path wire connection, door opening warning, auto lock settings, lock/unlock signal times, and engine auto lock/unlock.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Remote Key Functions

• വിദൂര തുടക്കം: Press the lock button 3 times. (Remote start requires the handbrake wire to be connected).
• Remote Stop: Press the lock button once. (Remote stop must be performed outside the PKE detection range).
• മ്യൂട്ട് മോഡ്: Hold the lock button for 3 seconds.
• വോക്കൽ മോഡ്: Hold the lock button again to switch back from mute mode.
• Trunk Open: Hold the trunk button for 3 seconds.
• Find Car: Press the trunk button once to locate your vehicle.
• റിമോട്ട് അൺലോക്ക്: Press the unlock button once.

4.2 Passive Keyless Entry (PKE)

• യാന്ത്രിക അൺലോക്കിംഗ്: When you approach the car (1-3 meters) with the remote key, the car will automatically unlock, windows may open, and rear-view mirrors may unfold (if configured).
• യാന്ത്രിക ലോക്കിംഗ്: When you move away from the car (1-3 meters) with the remote key, the car will automatically lock, windows may close, and rear-view mirrors will fold (if configured).
• Enable/Disable PKE: Hold the lock and unlock buttons simultaneously for more than 3 seconds. The siren will sound once for enable, and twice for disable. The remote LED light blinks slowly when PKE is enabled.

4.3 Push Button Start/Stop

• To start the engine, press the foot brake and then press the Start/Stop button.
• To stop the engine, press the foot brake and then press the Start/Stop button.

4.4 NFC Pass Usage

The NFC Pass provides an emergency method to unlock and lock your vehicle, especially if your remote key battery is dead or you don't have your phone.

To use the NFC Pass:

1. Tap the NFC card or a phone with an NFC sticker to the designated area on your car's windshield (where the NFC antenna is installed).
2. The car will unlock or lock accordingly.

4.5 ബ്ലൂടൂത്ത് ആപ്പ് നിയന്ത്രണം

Control your car using the "Aistart" Bluetooth app on your smartphone (not compatible with Samsung phones).

App functions include:

• ആപ്പ് ലോക്ക്
• ആപ്പ് അൺലോക്ക്
• App Start/Stop
• App Trunk
• App Find the Car

The Bluetooth control distance is approximately 20 meters.

4.6 അധിക സവിശേഷതകൾ

• Remote Trunk Opening: The trunk can be opened remotely with one key, eliminating the need for a mechanical key.
• One Key for Search: If you can't find your car in a parking lot, press the remote control, and the car will respond immediately.
• Automatic Central Locking: After starting the car and stepping on the foot brake for 10 seconds, the doors will lock automatically. The doors will unlock automatically when the engine is turned off.
• Air Conditioning Pre-cooling/Preheating: Remotely start your car and turn on the air conditioner to pre-cool in summer or preheat in winter. This is especially useful when the car is covered in ice and snow.

• നിശബ്‌ദ പ്രവർത്തനം: Turning on silent mode prevents locking the car from disturbing sleeping individuals.

5. പരിപാലനം

• Keep remote keys and NFC cards dry and away from extreme temperatures.
• Replace remote key batteries as needed to ensure reliable operation.
• എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമായും നാശത്തിൽ നിന്നും മുക്തമായും തുടരുന്നു എന്ന് ഉറപ്പാക്കുക.
• Periodically check the placement of antennas to ensure optimal signal reception.

6. പ്രശ്‌നപരിഹാരം

7 സ്പെസിഫിക്കേഷനുകൾ

8 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Check Compatibility Carefully: വാങ്ങുന്നതിന് മുമ്പ്asing or installing, double-check if your specific car model (e.g., Amarok, Celta 2008, Hilux diesel 2021, Pajero Full Diesel 2016, Hyundai H1 2009 Diesel) is compatible, especially regarding ignition type (key start only) and fuel type (gasoline recommended, diesel compatibility needs verification).
• പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: Due to the complexity of car wiring, professional installation is strongly advised to prevent damage and ensure correct functionality.
• NFC as Backup: Always remember your NFC card is a reliable backup for unlocking/locking if your remote key or phone battery dies.
• ആപ്പ് അനുയോജ്യത: If you own a Samsung phone, plan to use another Android device or an iPhone for the Bluetooth app control.
• Remote Start Benefits: Utilize the remote start feature to pre-condition your car's interior, making it comfortable in extreme weather.

9. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information and technical support, please refer to the official product documentation. A user manual in PDF format is available for download and can be referenced for further guidance: ഉപയോക്തൃ മാനുവൽ (PDF).

If you encounter any issues not covered in this manual, please contact your dealer or the manufacturer's customer support.