Linshang LS252D ലീബ് കാഠിന്യം ടെസ്റ്റർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

The Linshang LS252D is an integrated, pen-type Leeb hardness tester designed for precise measurement of various metallic materials. It features a D-type impact device and advanced dual coil technology, ensuring high repeatability and accuracy. The device includes a built-in direction sensor for automatic compensation of measurement errors across different impact directions. It supports conversion between multiple hardness scales: Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS), and Rockwell (HRA/HRB/HRC). This instrument is certified for accuracy by authoritative metrology institutes.

2. പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കാൻ രസീത് ലഭിക്കുമ്പോൾ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക:

• Leeb Hardness Tester (LS252D) x 1
• നൈലോൺ ബ്രഷ് x 1
• Small Support Ring x 1
• USB ഡാറ്റ കേബിൾ x 1
• ഉപയോക്തൃ മാനുവൽ x 1
• Certificate / Warranty Card x 1

3. ഉൽപ്പന്ന സവിശേഷതകൾ

• D-type impact device for measuring the hardness of various metallic materials.
• Advanced dual coil technology for good repeatability and measurement accuracy.
• Built-in direction sensor automatically compensates for measurement errors in different impact directions.
• Integrated design, flexible to adapt to various measurement occasions.
• Accuracy up to ±6HL, guaranteed to pass inspection by authoritative metrology institutions.
• Interchangeable hardness scales: HL, HV, HB, HS, HRA, HRB, HRC.
• USB interface for direct charging via power supply.
• Built-in data for 10 metal materials, including steel, alloy tool steel, stainless steel, gray cast iron, etc.

4 സ്പെസിഫിക്കേഷനുകൾ

5. സജ്ജീകരണം

5.1 ഉപകരണം ചാർജ് ചെയ്യുന്നു

The LS252D is powered by a rechargeable lithium battery. Before first use, or when the battery indicator on the OLED display shows low power, connect the device to a power supply using the provided USB data cable. The USB interface allows for convenient and quick direct charging.

5.2 അളവെടുപ്പിനായി തയ്യാറെടുക്കുന്നു

1. ഉപകരണം പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Clean the surface of the material to be tested. The surface should be smooth, free of rust, oil, paint, or any other coatings that could affect the measurement.
3. Ensure the test piece is stable. For thin or light workpieces (less than 5 kg or 25 mm thick), they must be firmly coupled to a solid support to prevent movement during impact. The minimum thickness after coupling should be 3mm.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 പവർ ഓൺ/ഓഫ്

• പവർ ഓൺ: അമർത്തുക പവർ ഓൺ ബട്ടൺ (labeled with a power symbol) located on the front of the device.
• പവർ ഓഫ്: അമർത്തിപ്പിടിക്കുക പവർ ഓൺ ബട്ടൺ ഉപകരണം ഷട്ട് ഡൗൺ ആകുന്നത് വരെ.

6.2 Selecting Hardness Scale

The LS252D supports multiple hardness scales. Use the navigation buttons (up/down arrows) to cycle through and select the desired hardness scale (HL, HV, HB, HS, HRA, HRB, HRC) on the OLED display.

6.3 ഒരു അളവ് നടത്തുന്നു

1. Ensure the D-type impact device is properly seated.
2. Place the tip of the impact device firmly and perpendicularly against the prepared surface of the material to be tested.
3. Slowly push the load sleeve down until it clicks, indicating the impact body has been released.
4. The hardness value will be displayed on the OLED screen. The built-in direction sensor automatically compensates for measurement errors regardless of the impact direction (360° measurement).
5. Repeat the measurement several times in different spots to ensure accuracy and consistency.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: Use the provided nylon brush to gently clean the impact device after use, removing any debris or dust. Do not use harsh chemicals or abrasive materials.
• ചാർജിംഗ്: Recharge the device regularly to maintain battery health. Avoid completely draining the battery for extended periods.
• സംഭരണം: Store the LS252D in its carrying case in a dry environment within the specified storage temperature range (-10~60℃, 0~85% RH, no condensation).
• കാലിബ്രേഷൻ: While the device is factory calibrated and guaranteed to pass inspection, periodic checks with a certified test block are recommended for critical applications.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your LS252D, please refer to the following common troubleshooting steps:

• ഉപകരണം ഓണാക്കുന്നില്ല: ബാറ്ററി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. ഉപകരണം ഒരു USB പവർ സ്രോതസ്സിലേക്ക് കണക്റ്റ് ചെയ്ത് വീണ്ടും ശ്രമിക്കുക.
• കൃത്യമല്ലാത്ത വായനകൾ:
  • Check if the test surface is clean and smooth.
  • Verify the test piece is stable and properly coupled if it's thin or light.
  • Ensure the impact device is held perpendicularly to the surface.
  • Confirm the correct hardness scale is selected.
• Impact device not firing: Check for any obstructions in the impact device mechanism. Ensure the load sleeve is pushed completely down.

പ്രശ്നങ്ങൾ നിലനിൽക്കുകയാണെങ്കിൽ, കൂടുതൽ സഹായത്തിനായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

9 ഉപയോക്തൃ നുറുങ്ങുകൾ

• For optimal accuracy, perform multiple measurements on the same sampഫലങ്ങൾ ശരാശരിയാക്കുക.
• Always ensure the impact direction is stable, even with the automatic compensation feature, to minimize external variables.
• Keep the device and its accessories in the provided carrying case to protect them from dust and physical damage.
• Familiarize yourself with the different hardness scales and their appropriate applications for your specific materials.

10. വാറൻ്റിയും പിന്തുണയും

The Linshang LS252D Leeb Hardness Tester comes with a warranty. Please refer to the included Certificate / Warranty Card for detailed warranty terms and conditions. For technical support, service, or any inquiries not covered in this manual, please contact the manufacturer or your authorized dealer.