SCULPFUN S30 PRO MAX Laser Engraver Instruction Manual

1. ആമുഖം

Thank you for choosing the SCULPFUN S30 PRO MAX Laser Engraver. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your device. The S30 series features advanced laser technology, including an automatic air-assist system, high-precision linear rails, and a robust design for various engraving and cutting applications.

2. പ്രധാന സുരക്ഷാ നിർദ്ദേശങ്ങൾ

മുന്നറിയിപ്പ്: ലേസർ വികിരണം കണ്ണിന് കേടുപാടുകൾ വരുത്താനും ചർമ്മത്തിൽ പൊള്ളൽ ഉണ്ടാകാനും കാരണമാകും. എപ്പോഴും സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക.

• മേൽനോട്ടം: Due to the powerful laser, never operate the engraving machine unsupervised. Pause operation if you need to leave the area.
• നേത്ര സംരക്ഷണം: Always install the detachable laser protective cover. If not installed, wear the provided laser goggles to protect your eyes from direct or scattered laser radiation.
• കൈ സംരക്ഷണം: Do not touch the laser with your hands during operation, as this may cause severe burns.
• ആഘാതം ഒഴിവാക്കൽ: Avoid strong impacts on the machine to prevent damage and maintain precision.
• കുട്ടികളുടെ സുരക്ഷ: This product is forbidden for children under 14 years old. Children over 14 years old require adult supervision during operation.
• പ്രതിഫലന പ്രതലങ്ങൾ: Do not apply the laser directly to any specular (mirror-like) reflective object, as this may cause injury to the operator or damage the laser.
• അഗ്നി അപകടം: Use the provided A4 size steel pad to protect your work surface from laser damage and isolate potential fire hazards.
• അടിയന്തരമായി നിർത്തുക: The machine is equipped with a safe and eye-catching power switch. In an emergency, you can directly and quickly turn off the power.

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1 x S30 Po Max laser module
• 1 x Laser Repair Kit (includes tweezers, screws, wrench, sealing ring)
• 1 x 12V automatic air pump
• 3 x A4 size 3mm wooden board
• 2 x Limit Switches
• 1 x 24V 5A power adapter
• 1 x പവർ കോർഡ്
• 1 x USB കേബിൾ
• 1 x എയർ ട്യൂബ്
• 1 x Installation tool Kit
• 1 x Laser Goggles
• 1 x A4 metal backing plate
• 1 x Manual (for detailed installation steps 1-6)
• 1 x എക്സ്-ആക്സിസ് അസംബ്ലി
• 2 x X profiles
• 2 x Y profiles
• 1 x Control Box Assembly
• 3 x സപ്പോർട്ട് അടി

4. ഉൽപ്പന്ന സവിശേഷതകൾ

The SCULPFUN S30 PRO MAX laser engraver is designed with several innovative features to enhance your engraving and cutting experience:

• Automatic Air Assist System: Equipped with a 32-bit motherboard and a control-type air pump, allowing intelligent control of the air-assist switch via LightBurn software (M8 button). This ensures clean engraving and cutting results.
• High-Precision Linear Slide Rail X-axis: Features an extremely solid and high-precision linear slide rail on the X-axis, achieving industrial-grade engraving accuracy of 0.005mm. This minimizes wavy patterns, especially when engraving small details.
• Powerful Laser Options: The S30 series offers three power options: S30 (5W), S30 Pro (10W), and S30 Pro Max (20W). The S30 Pro Max 20W laser is capable of cutting 15mm balsa wood and 10cm plywood in a single pass, ideal for professional use.
• Built-in High-Pressure Air Assist Nozzle: An advanced metal nozzle generates high-pressure airflow, significantly improving cutting efficiency (over 5 times faster than without air assist) and ensuring clean cut surfaces by blowing away residue.
• Replaceable Protective Lens: Innovative design allows for lens replacement, extending the laser's service life by more than 10 times compared to ordinary lasers. A free lens is included, and additional lenses are available for purchase.
• Eye Protection and Safety: Includes a detachable eye shield that can be adjusted or removed. An A4 size steel pad is provided to protect your work surface. An emergency power switch allows for quick shutdown.
• Sturdy and Durable Frame: Constructed from high-strength aluminum alloy, the frame can support up to 50KG without damage, ensuring long-term precision and durability.
• Innovative XY Axis Expandable Design: The engraving area can be expanded. With an optional Y-axis expansion kit, the area extends to 935x400mm. With an optional XY-axis expansion kit, it can reach 935x905mm, accommodating larger projects.
• Precise Scale Lines: X-axis and Y-axis feature precise scale lines for easy measurement of engraved objects.
• വയർലെസ് കണക്റ്റിവിറ്റി: Supports Bluetooth (BT) wireless connection for convenient data transmission.

5. സജ്ജീകരണ ഗൈഡ്

ഈ വിഭാഗം ഒരു പൊതു ഓവർ നൽകുന്നുview of the setup process. For detailed, step-by-step assembly instructions, please refer to the included physical manual (Step 1-6 Install the package).

5.1 അസംബ്ലി

Follow the instructions in the provided manual to assemble the X-axis, Y-axis profiles, control box, and support feet. Ensure all connections are secure.

5.2 Connecting the Air Assist System

Connect the 12V automatic air pump to the designated port on the mainboard and attach the air hose (7.5mm inner diameter) to the high-pressure air assist nozzle on the laser module.

5.3 സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷനും കണക്ഷനും

Install the recommended operating software such as LightBurn (supports M8 air assist function), LaserGRBL, Benbox, GrblController, or LiteFire. The software supports Windows and MAC systems. Connect the engraver to your computer via USB cable or Bluetooth (BT) wireless connection.

5.4 ലേസർ ഫോക്കസ് ചെയ്യൽ

The S30 series uses a fixed focus column and a sliding device for focusing. Refer to the manual for precise instructions on how to achieve optimal focus for your material.

5.5 പരിധി സ്വിച്ചുകൾ

The included limit switches enable homing and precise positioning, which is crucial for repeated and accurate engraving/cutting tasks.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Operating your SCULPFUN S30 PRO MAX involves preparing your design, setting up the machine, and executing the engraving or cutting process.

6.1 മെറ്റീരിയൽ തയ്യാറാക്കൽ

Place your material on the A4 metal backing plate to protect your work surface. Ensure the material is flat and securely positioned within the 410x400mm engraving area.

6.2 സോഫ്റ്റ്‌വെയർ പ്രവർത്തനം

Use your chosen software (e.g., LightBurn) to import your design (NC, BMP, JPG, PNG, DXF, etc.). Configure the engraving or cutting parameters, including speed, power, and whether to use air assist (controlled via M8 in LightBurn).

6.3 കൊത്തുപണി, മുറിക്കൽ പ്രക്രിയ

Once your design and machine settings are configured, initiate the process from the software. The laser will begin to engrave or cut according to your specifications. The automatic air assist will intelligently turn on or off as needed for optimal results.

6.4 അനുയോജ്യമായ വസ്തുക്കൾ

കൊത്തുപണി സാമഗ്രികൾ: All kinds of wood (including walnut, cherry, and other high-density woods), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone.

കട്ടിംഗ് മെറ്റീരിയലുകൾ: All kinds of wood (including walnut, cherry, and other high-density woods), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards.

7. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ലേസർ എൻഗ്രേവറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

7.1 Laser Lens Replacement

The S30 series features a replaceable lens design. If the lens becomes damaged or its performance degrades after long-term use, it can be replaced to restore cutting power. A free replacement lens is included in the package, and additional lenses can be purchased from SCULPFUN.

7.2 പൊതുവായ ശുചീകരണം

Keep the laser module and linear rails clean from dust and debris to maintain engraving accuracy and smooth operation. Use a soft, dry cloth for cleaning. Avoid using abrasive materials or harsh chemicals.

8. പ്രശ്‌നപരിഹാരം

ചില പൊതുവായ പ്രശ്നങ്ങളും സാധ്യമായ പരിഹാരങ്ങളും ഇതാ:

• Wavy Patterns in Engraving: The S30 Pro Max is designed with a high-precision linear slide rail X-axis to prevent wavy patterns. If you observe such patterns, ensure all mechanical components are securely fastened and the rails are clean.
• Fan Starts Immediately: It is normal for the fan to start spinning immediately when the machine is powered on. This ensures proper cooling of the laser module.
• Poor Cutting/Engraving Quality:
  • ലേസർ ഫോക്കസ് പരിശോധിക്കുക.
  • Ensure air assist is properly connected and activated for cutting tasks.
  • Verify power and speed settings in your software are appropriate for the material.
  • Inspect the laser lens for dirt or damage; replace if necessary.
• മെഷീൻ പ്രതികരിക്കുന്നില്ല:
  • എല്ലാ പവർ കണക്ഷനുകളും പരിശോധിക്കുക.
  • Ensure USB or Bluetooth connection is stable.
  • Restart the software and the machine.

For more detailed troubleshooting, please refer to the comprehensive manual or contact SCULPFUN support.

9 സ്പെസിഫിക്കേഷനുകൾ

10 ഉപയോക്തൃ നുറുങ്ങുകൾ

• Engraving Stainless Steel: The S30 PRO MAX is capable of engraving 304 stainless steel. For best results, ensure proper power and speed settings.
• Cutting Clear Acrylic: While the S30 series can cut acrylic boards, cutting transparent acrylic can be challenging for diode lasers without special preparation (e.g., painting the surface or using specific settings). Experiment with test pieces first.
• Expansion Kits: The Y-axis and XY-axis expansion kits, as well as the rotary roller for cylindrical objects, are sold separately. These are excellent upgrades for expanding your project capabilities.
• സോഫ്റ്റ്വെയർ അനുയോജ്യത: The engraver is compatible with popular software like LightBurn and LaserGRBL. LightBurn is recommended for utilizing the automatic air assist function (M8 switch).

11. വാറൻ്റിയും പിന്തുണയും

For any issues, technical support, or warranty claims, please contact the official SCULPFUN Sculpfun Official Store directly. Keep your purchase records handy for faster service.